Session Details
[MD-P-001]Material Development in Energy & Sustainability P1
Sat. Dec 13, 2025 1:00 PM - 2:00 PM JST
Sat. Dec 13, 2025 4:00 AM - 5:00 AM UTC
Sat. Dec 13, 2025 4:00 AM - 5:00 AM UTC
Entrance Hall (ES Building)
[MD-P-1-01]Design of 3D Graphite Anode for Electrochemical Methanol Production from Lignin
*Zichun Xiong1, Takashi Hibino1, Kazuyo Kobayashi1, Aki Miyawaki2, Shinya Teranishi2, Yoshiharu Sawada1 (1. Nagoya Univ., 2. Soken, Inc.)
[MD-P-1-02]Solid Oxide Fuel Cell Directly Operating on Biogas at High Fuel Utilizations
*Jingyi Tan1, Takashi Hibino1 (1. Nagoya University)
[MD-P-1-03]Effect of Fe2O3 metal oxide on the discharge of a direct lignin SOFC
*Atsuhiro Sumiya1, Naohiro Ikeda1, Takashi Hibino1 (1. Nagoya Univ.)
[MD-P-1-04]γ-Ga2O3 supported by α-Ga2O3 as a photocatalyst for CO2 reduction with water
*Kosuke Kawaai1, Naoto Ota2, Shigeo Arai3, Muneaki Yamamoto3, Tetsuo Tanabe1, Tomoko Yoshida1,3 (1. Graduate School of Engineering, Nagoya University, 2. Graduate School of Engineering, Osaka Metropolitan University, 3. Institute of Materials and Systems for Sustainability, Nagoya University)
[MD-P-1-05]Development of high-energy-density spinel oxide cathode materials for lithium-ion batteries
*Yuto Yokoe1, Masataka Yoshimoto1, Makoto Kobayashi1, Minoru Osada1, Takashi Nakamura1 (1. Institute of Materials and Systems for Sustainability, Nagoya University)
[MD-P-1-06]Facile Synthesis of 2D Platinum Nanosheets with Nanodendrite Structures for Efficient Hydrogen Evolution Reaction
*YUTAO HU1, Makoto Kobayashi1, Eisuke Yamamoto1, Rubén Cantón Vitoria1, Minoru Osada1 (1. Institute of Materials and Systems for Sustainability (IMaSS), Nagoya University)
[MD-P-1-07]Ferroelectricity in CsPb2Nb3O10 and exfoliated 2D nanosheets
*Yan LI1, Masanari Shimada2, Makoto Kobayashi1,2, Eisuke Yamamoto1,2, Ruben Canton-Vitoria1,3, Minoru Osada1,2,4 (1. the Institute of Materials and Systems for Sustainability, Nagoya University, 2. Department of Materials Chemistry, Nagoya University, 3. Joining and Welding Research Institute, Osaka University, 4. Research Institute for Quantum and Chemical Innovation, Institutes of Innovation for Future Society, Nagoya University)
[MD-P-1-08]Oxygen Vacancy Diffusion in BaTiO3 via Machine Learning Potential
*Masaaki Araidai1, Tomofumi Tada2 (1. Institute of Materials and Systems for Sustainability, Nagoya University, 2. Kyushu University Platform of Inter/Transdisciplinary Energy Research, Kyushu University)
[MD-P-1-09]Effect of interface between Ag nanoparticles and Ga2O3 photocatalysts on their CO2 photoreduction activity with water
*Takeshi KOTOKAWA1, Muneaki YAMAMOTO2,1, Satoshi OGAWA2,1, Akira YASUI3, Tetsuo TANABE1, Makoto KUWAHARA2,1, Eiji IKENAGA4, Tomoko YOSHIDA2,1 (1. Grad. Sch. Engineering, Nagoya Univ., 2. Institute of Materials and Systems for Sustainbility, Nagoya Univ., 3. Japan Synchrotron Radiation Research Institute / SPring-8, 4. Photon Science Innovation Center / NanoTerasu)
[MD-P-1-10]Photocatalytic water vapor dissociation using hydrophilic cocatalyst with β-Ga2O3
*Yuki Tsukamoto1, Naoto Ota2, Kouki Hamada3, Keisuke Fujita4, Yuichi Matsuo4, Hisao Yoshida3, Tetsuo Tanabe1, Muneaki Yamamoto5, Tomoko Yoshida1 (1. Department of Applied Energy, Graduate School of Engineering, Nagoya University., 2. Department of Chemistry and Bioengineering, Graduate School of Engineering, Osaka Metropolitan University., 3. Factory of Integrated Human Studies, Graduated School of Human and Environmental Studies, Kyoto University., 4. Honda R&D Co., Ltd., 5. Institute of Materials and Systems for Sustainability, Nagoya University.)
[MD-P-1-11]Morphology Control of Titanate Nanoflakes and Nanosheets by Aqueous Solution Process
*Ahmad Fikri1, Takayuki Ban1, Kunihiko Kato1, Yusuke Hashimoto1 (1. Gifu University)
[MD-P-1-12]Comparison of mechanical properties of porous polyurethane gels with different molecular structures.
*Ryosuke Iwayama1, Kazuki Nakanishi1, George Hasegawa1 (1. Nagoya University)
[MD-P-1-13]Synthesis of macroporous diethylphenylene-bridged polysilsesquioxane gels and their mechanical properties
*Ryoya Morito1, Kazuki Nakanishi1, George Hasegawa1 (1. Nagoya University)
[MD-P-1-14]Fabrication of hard carbon/NASICON composite anodes for all-solid-state batteries
*Himari Morishita1, George Hasegawa1 (1. Nagoya University)
[MD-P-1-15]Innovative Development of Production and Evaluation Technologies of Silicon Compounds and Their Thin Films for Advanced Fields
*Katsuyoshi Harada1, Jun Kumagai (1. IMaSS, Nagoya University)
[MD-P-1-16]Cross-sectional Analysis of Solvent Inclusions and Macrostep Dynamics in p-Type 4H-SiC Grown from Solution
*Takahiro Ito1, Kentaro Kutsukake1,2, Shunta Harada1,2, Toru Ujihara1,2 (1. Graduate School of Engineering, Nagoya University, Japan, 2. Institute of Materials and Systems for Sustainability (IMaSS), Nagoya University, Japan)
[MD-P-1-17]Development of Text-Guided Control for Temperature Distribution and Flow Patterns in SiC Solution Growth using Language Models
*Kota Takahara1, Kentaro Kutsukake1,2, Shunta Harada1,2, Toru Ujihara1,2 (1. Graduate School of Engineering, Nagoya University, Japan, 2. Institute of Materials and Systems for Sustainability (IMaSS), Nagoya University, Japan)
[MD-P-1-18]Elucidating the Step Propagation Mechanism in SiC Solution Growth Using the Phase-Field Method
*Seiya Harada1 (1. Nagoya University)
[MD-P-1-19]Elucidation of the Origin of Polycrystals Adhering to the Growth Interface during SiC Solution Growth
*Hiroki Sugiura1, Kentaro Kutsukake1,2, Shunta Harada1,2, Toru Ujihara1,2 (1. Graduate school of Engineering, Nagoya University, Japan, 2. Institute of Materials and Systems for Sustainability (IMaSS), Nagoya University, Japan)
[MD-P-1-20]Synthesis and application of doped cesium polytungstate nanosheet
*Qiuming Huang1, Ruben Canton-Vitoria1, Yamamoto Eisuke1, Makoto Kobayashi1, Minoru Osada1 (1. Nagoya University)
[MD-P-1-21]Fabrication of Porous Carbon Monoliths from Metal-Containing Phenolic Resins
*Miharu Mori1, Kazuki Nakanishi1, George Hasegawa1 (1. Nagoya University)
[MD-P-1-22]Experimental Implementation of Reinforcement Learning for Floating Zone Crystal Growth Automation
*Sogo Yanagisawa1, Ryohei Matsumoto2, Shogo Sumitani2, Takuya Inagaki3, Eisuke Bannai4, Kentaro Kutsukake1,5, Toru Ujihara1,5, Shunta Harada1,5 (1. Grad. Sch. Eng., Nagoya Univ, 2. Anamorphosis Networks, 3. Sanko, 4. NIMS, 5. IMaSS, Nagoya Univ)
[MD-P-1-23]Silicon carbide-based nanocomposite for anti-erosion coatings by chemical vapor deposition
*Hirokazu Katsui1, kazuya Shimoda2, Katsuyoshi Harada3, Jun Kumagai3, Mikinori Hotta1 (1. National Institute of Advanced Industrial Science and Technology (AIST), 2. National Institute for Materials Science (NIMS), 3. Nagoya University)
[MD-P-1-24]Efficient Re-Optimization Method using VAE to Transfer Growth Conditions between Crystal Growth Systems
*Takanao Sakamoto1, Kentaro Kutsukake1,2, Shunta Harada1,2, Toru Ujihara1,2 (1. Graduate School of Engineering, Nagoya University, Japan, 2. Institute of Materials and Systems for Sustainability (IMaSS), Nagoya University, Japan)
[MD-P-1-25]Surface Planarization Mechanism during Dissolution in Solution Growth of 4H-SiC
*Shuto Sugimoto1, Toru Ujihara1,2, Shunta Harada1,2, Kentaro Kutukake1,2 (1. Graduate School of Engineering, Nagoya University, Japan, 2. Institute of Materials and Systems for Sustainablity, Nagoya University, Japan)
[MD-P-1-26]Topotactic Synthesis of Ca2MnO4 Ruddlesden-Popper Perovskite Polyhedra
*Yuta Hirano1, Kazuki Nakanishi1, George Hasegawa1 (1. Nagoya University)