JSME Environmental Engineering Division

[AW-01]Awards ceremony

[SS1]Leagal engineering learned from new corona countermeasures

〇Keisuke Kondo¹(1. 福田・近藤法律事務所)

[SS2]Study on Ammonia Combustion and Application for a Combustor toward Carbon Neutral Society

〇Akihiro Hayakawa¹(1. 東北大学)

[webex]セッションのオンライン参加

[101]Experiment and Numerical Analysis on Flow Noise Generated from Volume Damper

〇Hayato Yoshinaga¹, Gaku Minorikawa², Tsunebumi Mikuni¹(1. 新菱冷熱工業（株）、2. 法政大学)

[103]Vortex-flow mechanism of cavity tone with acoustic resonance

〇Yoshiyuki MARUTA¹, Takeshi TOI¹(1. 中央大学)

[104]Flow Regime and Noise Characteristics in Solenoid Valve for Hydrogen

〇Keisuke Suzuki¹, Hifni Mukhtar Ariyadi¹, Jongsoo Jeong¹, Kiyoshi Saito¹(1. 早稲田大学)

[105]Sensory Characteristics of Fluctuating Low-Frequency Sounds

〇Yamato Isuru Yoshihara¹, Hiroshi Matsuda², Nobuo Machida²(1. 日本大学大学院理工学研究科、2. 日本大学理工学部)

[webex]セッションのオンライン参加

[106]Improvement of sound source localization by deconvolution method considering sound field

〇Nobuhiro Yamazaki¹(1. 鉄道総合技術研究所)

[107]Estimating of the noise generated by multi-copter drone

〇Koki Inomata¹, Norio Oshima², Yoshinari Hayashi³, Toshiya Kitamura⁴(1. 山梨大学大学院、2. 元 中国能力開発大学校、3. 旭ビルウォール株式会社、4. 山梨大学)

[108]Hammering sound evaluation under drone noise environment using noise reduction and machine learning methods

〇Kazuhiro Inoue¹, Anto Fredy¹, Yuki Fujihata², Junji Yoshida²(1. 大阪工業大学大学院、2. 大阪工業大学)

[109]Analysis of a parametric speaker by using concentrated mass model

〇Shotaro Hisano¹, Hiroyuki Iwamoto¹, Satoshi Ishikawa²(1. 成蹊大学、2. 九州大学)

[webex]セッションのオンライン参加

[110]Vibration characteristics of construction machine cab with operator

〇Shohei Terauchi¹(1. 株式会社小松製作所)

[111]Contribution separation technique by operational TPA using multiple measuring systems.

〇Takashi Yamamoto¹, Takashi Okada², Yuta Nozuchi¹, Junji Yoshida²(1. 大阪工業大学大学院、2. 大阪工業大学)

[112]Impact absorption performance of carbon fiber reinforced plastic with lightweight and high rigidityExperimental consideration with drop weight test

〇Kohei Narikawa¹, Kento Nishiyama¹, Hideaki Kato², Takayoshi Narita²(1. 東海大学大学院、2. 東海大学)

[113]A basic study on cylindrical shell member for impact energy installed at front of automobileFundamental consideration on effect of ribs on energy absorption performance

〇Kento Nishiyama¹, Kohei Narikawa ¹, Hideaki Kato², Takayoshi Narita²(1. 東海大学大学院、2. 東海大学)

[webex]セッションのオンライン参加

[201]Effect of steaming treatment on softening and molding characteristics of pseudo wood flour and optimum conditions for steaming treatment

〇Taiki Nakahara¹, Sawai Toru²(1. 近畿大学大学院、2. 近畿大学)

[202]Effects of steaming and high-density molding on the pyrolysis properties of solid biofuels

〇Hirohide Mizuno¹, Toru Sawai²(1. 近畿大学大学院、2. 近畿大学)

[203]Effect of densification molding of pseudo-biomass on pyrolysis properties

〇Kousuke Harada¹, Toru Sawai¹, Satoru Mizuno¹(1. 近畿大学大学院 　)

[204]Pyrolysis behavior of CFRP by electromagnetic-wave-mediated selective heating

〇Jun Kobayashi¹, Taro Yamagishi¹, Ryosuke Koike¹(1. 工学院大学)

[205]Improvement of a small-scale collection system of medical waste by utilizing IoT
2^nd report: Proposal of WCMS (Work Chain Management System)

〇Kentaro Yokoyama¹, Yutaro Ito¹, Daiki Yoshidome¹, Akihisa Ogawa¹, Hiroshi Onoda¹(1. 早稲田大学大学院)

[webex]セッションのオンライン参加

[206]Combustion kinetic analysis of torrefied biocoke

〇Taito Shimizu¹, Satoru Mizuno¹, Tamio Ida¹(1. 近畿大学)

[207]Understanding the actual situation of energy supply and demand in large-scale waste treatment and recycling facilities and evaluating the effect of CO2 reduction

Ryo Kikuchi¹, 〇Yuki Okanoya¹, Daiki Yoshidome¹, Hiroshi Onoda¹(1. 早稲田大学)

[208]Applicability of AI technology to solid waste crane operation for small plant

〇Kazue Shibata¹, Satoshi Oomori¹, Noriaki Shiraishi²(1. 三機工業（株）、2. 三機化工建設（株）)

[209]The possibility of cooperation between municipal waste incineration plants and sewage treatment plants using GISConstruction and discussion of national data

Akihisa OGAWA¹, 〇Shimpei ONO¹, Hiroshi ONODA¹(1. 早稲田大学)

[210]Study on the Technology Readiness Assessment of AI and IoT technologies in municipal waste management systems

〇Koki Sugita¹, Akihisa Ogawa¹, Hiroshi Onoda¹(1. 早稲田大学)

[webex]セッションのオンライン参加

[211]Effect of initial formation parameters on pineapple residue Biocoke fundamental characteristic

〇Tiz Feng¹, Tamio Ida²(1. 近畿大学大学院、2. 近畿大学)

[212]Consideration of carburizing process in the casting using Bio-coke

〇Yoshihiro Tomita¹, Shimada Kandai¹, Ida Tamio¹(1. 近畿大学)

[213]The Particle Density and Internal Strength of Japanese Cedar Base Pre-carbonized Solid Biofuel (Bio-coke) affected by Additional Cellulose and Alkali Lignin Compared with Additional Hemicellulose

〇Supitchaya Cherdkeattikul¹, Nami Kanada¹, Tamio Ida¹(1. 近畿大学)

[214]Production of Bio-Coke from Spent Mushroom Substrate for a Sustainable Solid Fuel

〇Nur Syahirah binti Kamal Baharin¹(1. 近畿大学)

[webex]セッションのオンライン参加

[301]Demonstration Test of Closed Loop VOC Recovery System

〇Masayuki Kawaoka¹, Hideto Takahashi¹(1. 高砂熱学工業株式会社)

[302]Evaluation of a Catalyst Packed-bed Nonthermal Plasma Reactor for VOC and PM Removal

〇Takumi Shimada¹, Kohei Kishimoto¹, Haruhiko Yamasaki¹, Tomoyuki Kuroki¹, Jinkyu Kang², Dongwook Kim², Tadao Yagi³, Masaaki Okubo¹(1. 大阪府立大学、2. サムスン電子株式会社、3. サムスン日本研究所)

[303]Performance of a Wet-Type Nonthermal Plasma Reactor for VOC and PM removal

〇Misaki Ohashi¹, Kohei Kishimoto¹, Haruhiko Yamasaki¹, Tomoyuki Kuroki¹, Jinkyu Kang², Dongwook Kim², Tadao Yagi³, Masaaki Okubo¹(1. 大阪府立大学、2. サムスン電子株式会社、3. サムスン日本研究所)

[304]Investigation on dry reforming methane by plasma-enhanced spouted bed

〇Kenji Kamiya¹, Ryota Yoshimi¹, Nobusuke Kobayashi¹, Fan Xiao¹, Yoshinori Itaya¹, Tsuguhiko Nakagawa¹, Akira Suami¹(1. 岐阜大学 大学院工学研究科 環境エネルギーシステム専攻)

[webex]セッションのオンライン参加

[305]Numerical simulation of ammonia turblent diffusion burner with hydrogen flame stabilizer

〇Tomohiro Tsubota¹, Naoya Matsuda¹, Yukihiko Okumura¹, Takahiro Kitano², Tsukasa Hori², Fumiteru Akamatsu²(1. 香川大学、2. 大阪大学)

[306]Development of measurement method for non-condensable gas in water vapor

〇Takehiko Sato¹, Tomoki Nakajima¹, Kento Horiuchi¹, Siwei Liu¹, Takeru Yano²(1. 東北大学、2. 大阪大学)

[307]High purity hydrogen production by plasma membrane reactor

〇aiya ito¹, yukio hayakawa¹, shinji kambara¹, tomonori miura²(1. 岐阜大学大学院 自然科学技術研究科、2. 澤藤電機株式会社：〒370-0344 群馬県太田市新田早川町３)

[308]Development of NO_x Prediction Method by Reactor Network Model

〇Kazunari Ishikawa¹, Shinji Kambara¹, Yukio Hayakawa¹(1. 岐阜大学)

[webex]セッションのオンライン参加

[309]Fundamental combustion behaviors of dried sewage sludge

〇Ryo Yoshiie¹, Kazushi Kobayashi¹, Yasuaki Ueki¹, Ichiro Naruse¹, Takuya Kawai², Masato Endo²(1. 名古屋大学、2. メタウォーター株式会社)

[310]Hydrogen production characteristics of ammonia steam decomposition by plasma

〇Wataru Inukai¹, Siji Kanbara¹, Yukio Hayakawa¹, Tomoki Miura²(1. 岐阜大学、2. 澤藤電機株式会社)

[311]Development of Novel Ni-H₂ flow battery with Rapidly Recharge

〇Akifumi Miyamoto¹, Motonobu Kawaguchi¹, Yukio Hayakawa¹, Shinji Kambara¹, Tomonori Miura²(1. 岐阜大学、2. 澤藤電機株式会社)

[webex]セッションのオンライン参加