[D1]In situ observation of lubricant on rolling interface
○Hiroshi Utsunomiya1, Yoshimitsu Terada1, Ryo Matsumoto1(1.Osaka Univ.)
The 182nd ISIJ autumn Meeting
Aug 17 - Sep 17, 2021on-line
You can search for presentations in this event.
Search
The 182nd ISIJ autumn Meeting
Aug 17 - Sep 17, 2021on-line
You can search for presentations in this event.
SearchSearch Results(365)
[D2]Effect of additives Mixed in lubricating oil on oil film formation and coefficient of friction
○Tomoko Hirayama1, Hironobu Nakanishi2(1.Kyoto Univ., 2.Kobe Steel)
[D3]In situ observation of extreme pressure agent in EHL oil films by a micro infrared spectroscopy
○Ayako Miura1, Masayasu Ueno1, Hideo Kijima1, Yasushi Hoshi2, Hidetaka Nanao2, Koshi Kume3(1.JFE, 2.Iwate Univ., 3.Daido Chemical)
[D4]Estimation of surface topology based on rolling pressure distribution
○Yasuhiro Okada1, Kenichi Tanaka1, Kenichi Kobayashi1, Tatsuya Yabe2, Jun Yanagimoto3(1.Nihon Parkerizing, 2.Parker Surface Technologies, 3.The Univ. of Tokyo)
[D5]Consideration of emulsion lubrication described by μ-EHL and 3D-stribeck-curve
○Takeyoshi Fukuda1, Kengo Takeda1(1.Nippon Quaker Chemical, Ltd.)
[D6]Fundamental study of lubrication characteristics of high strength steel in cold rolling
○Masahiro Shimura1, Daisuke Kasai1(1.Nippon Steel)
[D7]Development of cold rolling oil for tinplate with high ESI
○Tatsuaki Ishii1, Satoshi Inagaki1, Noboru Matsunaga2(1.Daido Chemical Co., Ltd., 2.Daido Quimica Do Brasil Ltda.)
[D8]Effect of applying lubricant in hot rolling
○Shingo Watanabe(Kyodo yushi Co., Ltd.)
[D9]Effect of alloying elements on the formation of white structure under rolling contact fatigue
○Masahide Natori1, Arata Iwamaru1, Hiroki Komata1, Hideyuki Hidaka1(1.NSK)
[D10]Visualization of strain distribution during tensile deformation in a martensitic steel by using digital image correlation method on replica films
○Norimitsu Koga1, Motoki Fujita1, Chihiro Watanabe1(1.Kanazawa Univ.)
[D11]Evaluation of inhomogeneous deformation behavior by nano-scale DIC analysis in medium-Mn steel treated with interrupted quenching and intercritical annealing
○Takuro Masumura1, Toshihiro Tsuchiyama1, Satoshi Morooka2, Tatsuya Nakagaito3(1.Kyushu Univ., 2.JAEA, 3.JFE)
[D12]Deformation behavior of medium manganese steels at cryogenic temperature monitored by neutron diffraction
○Takayuki Yamashita1, Satoshi Morooka2, Takuro Kawasaki2, Stefanus Harjo2(1.Osaka Univ., 2.JAEA)
[D13]Formation of deformation-induced transformation texture in SUS 304 stainless steel
○Yusuke Onuki1, Pramote Thirathipviwat1, Shigeo Sato1(1.Ibaraki Univ.)
[D14]Analysis of the interaction between dislocations and twin boundaries in FCC iron using the molecular dynamics
○Kosuke Kawatsu1, Toshihiro Tsuchiyama1, Katsutoshi Hyodo1(1.Kyushu Univ.)
[D15]Molecular dynamics analysis of nucleation mechanism of martensite transformation in polycrystalline materials
○Tomotsugu Shimokawa1, Kota Fujii1(1.Kanazawa Univ.)
[D16]High-temperature digital image correlation analysis of plastic deformation with Portevin-LeChatelier effect in austenitic stainless steel
○Seungyong Lee1, Nobuo Nakada1, Chikako Takushima2, Jun-ichi Hamada2(1.Tokyo Tech., 2.Nippon Steel Stainless Steel)
[D17]Variant analysis on deformation-induced γ→ε→α’ martensitic transformation in Fe-5Mn-0.1C steel
○Takahiro Sawaguchi1, Motomichi Koyama2(1.NIMS, 2.Tohoku Univ.)
[D18]Strength and deformation of ferritic steel with mixed dispersion of hard and soft phases
○Toshihiro Tsuchiyama(Kyushu Univ.)
[D19]Rapid determination of minor elements in low alloy steel by laser induced breakdown spectroscopy and deep neural network
○Shunsuke Kashiwakura(Ritsumeikan Univ.)
[D20]A review on on-line measuring technique in steelmaking processes
○Yuichi Uchida(Nippon Inst. of Tech.)
[D21]Application of laser induced breakdown spectroscopy to iron and steel making processes
○Yoshihiro Deguchi(Tokushima Univ.)
[1]Measurement of change in the lattice constant of Fe-C alloy before and after δ-γ transformation
○Yukihiro Nanri1, Taka Narumi1, Hideyuki Yasuda1(1.Kyoto Univ.)
[2]Effects of Ti on coarsening of gamma grains produced by a massive-like transformation in carbon steels
○Sota Tsuji1, Taka Narumi1, Ryoji Katsube1, Hideyuki Yasuda1(1.Kyoto Univ.)
[3]Effect of residual δ phase on γ phase coarsening after a massive-like δ/γ transformation in Fe-18Cr-11Ni alloy
○Taka Narumi1, Kodai Ichida1, Ryoji Katsube1, Hideyuki Yasuda1(1.Kyoto Univ.)
[4]Quantitative evaluation of dendrites in 304 stainless steel by using time-resolved tomography
○Minori Nonomura1, Taka Narumi1, Ryoji Katsube1, Hideyuki Yasuda1(1.Kyoto Univ.)
[5]Time-resolved and in-situ observation of α-γ transformation in TiAl alloys
○Tomohiro Nishimura1, Hitoshi Ishida1, Hideyuki Yasuda2(1.Kobe Steel, 2.Kyoto Univ.)
[6]Compositional and morphological changes of Mn-Si-Al deoxidation products during solidification of steel
○Jonah Gamutan1, Chihaya Fujiwara1, Takahiro Miki1, Tetsuya Nagasaka1(1.Tohoku Univ.)
[7]Influential factors on solidification cracking susceptibility of stainless steels with F-mode solidification
○Kota Kadoi1, Seiya Ueno1, Hiroshige Inoue1(1.Osaka Univ.)
[8]Effect of Ti addition and thermal history on hot ductility of Nb containing steel
○Shin Takaya1, Taro Hirosumi1, Yoshiki Ito1, Toshiyuki Kajitani1, Kenji Taguchi1(1.Nippon Steel)
[9]Efforts to improve durability by controlling thermal expansion of tundish safety lining
○Yushi Tsutsui1, Yoshiyoshi Saito1, Youichi Tsuji2(1.Nippon Steel, 2.Krosaki Harima)
[10]Effect of reduction characteristic of fine iron ore by pulverized coal on atmospheric gas
○Kentaro Yamamoto1, Yasuaki Ueki1, Ryo Yoshiie1, Ichiro Naruse1, Yuya Morita2(1.Nagoya Univ., 2.JFE)
[11]Formation mechanism of fine fibrous metallic iron by hydrogen reduction of iron oxide
○Nanako Toyoshima1, Daisuke Maruoka1, Taichi Murakami1, Eiki Kasai1(1.Tohoku Univ.)
[12]The analysis of hematite(Fe2O3)-reduction with nitride
○Nobuhiro Ishikawa1, Tadashi Mitsui1, Kazutaka Mitsuishi1, Masaki Takeguchi1, Takashi Kimura2(1.NIMS, 2.JEOL)
[13]Investigation of pre-reduced iron ore production for blast furnace development of adiabatic counter current moving bed for shaft furnace reaction simulator -2
○Moritoshi Mizutani1, Tsunehisa Nishimura1, Takashi Orimoto1, Kenichi Higuchi1(1.Nippon Steel)
[14]Carburization and melting behavior of reduced iron in carbon-iron ore composite using un-carbonated biomass
○Ryota Higashi1, Daisuke Maruoka1, Taichi Murakami1, Eiki Kasai1(1.Tohoku Univ.)
[15]DEM-CFD simulation on clogging behavior of narrow path in blast furnace
○Daichi Tsukada1, Shungo Natsui1, Hiroshi Nogami1(1.Tohoku Univ.)
[16]Effect of reduction degree of sinter iron ore on slag penetration behavior against graphite balls packed layer
○Ritsuki Tani1, Koichiro Ohno1, Takayuki Maeda1(1.Kyushu Univ.)
[17]Analysis of deformation behavior of packed bed in blast furnace cohesive zone by the Bingham fluid model
○Mizuki Tanaka1, Shungo Natsui1, Hiroshi Nogami1(1.Tohoku Univ.)
[18]Fast dynamic model of sintered ore softening deformation
○Shungo Natsui1, Mizuki Tanaka1, Andrey Stephan Siahaan1, Hiroshi Nogami1(1.Tohoku Univ.)
[19]Effects of some factors on gangue removal from iron ore by alkali hydrothermal treatment
○Yuuki Mochizuki1, Ade Kurniawan1, Takahiro Nomura1, Naoto Tsubouchi1, Ken-ichi Higuchi2(1.Hokkaido Univ., 2.Nippon Steel)
[20]Effect of multiple and slit burner on decreasing combustion energy in view of combustion efficiency development of REMO-tec (RE-ignition method for optimization of total energy consumption) - 4
○Masaru Matsumura1, kyosuke Hara1, Kenichi Higuchi1, Masahide Yoshikawa1(1.Nippon Steel)
[21]Phase relation between quaternary calcium ferrite and liquid on the CaO-SiO2-Fe2O3-5mass% Al2O3 system at 1240℃ in air
○Yukihiro Uchisawa1, Takashi Watanabe1, Rie Endo1, Masahiro Susa1, Miyuki Hayashi1(1.Tokyo Tech.)
[22]Relation between high temperature reducibility and pore factors
○Satoshi Yamada1, Kyosuke Hara1, Toru Takayama1, Hideaki Yabe1, Junji Nagata1, Kenichi Higuchi1(1.Nippon Steel)
[23]Development of steam heating granulation technology for increasing sinter productivity
○Shohei Fujiwara1, Toshiyuki Hirosawa1, Takahide Higuchi1, Kiyoshi Fukada1, Hiroshi Tanaka1, Hiroshi Tanaka1(1.JFE)
[24]Effect of applying “Lump Ore MEBIOS” on sinter productivity in Oita No.1 sintering machine
○Taro Sugiura1, Masaru Matsumura1, Shingo Furusho1(1.Nippon Steel)
[25]Improvement of coke layer shape by increasing rotating speed of bell-less chute
○Yasushi Ogasawara1, Yusuke Kashihara2, Taihei Nouchi3, Takeshi Sato4(1.JFE, 2.JFE, 3.JFE, 4.JFE)
[26]Investigation of melting behavior of low-fluidity coal by synchrotron X-ray imaging
○Sara Arakawa1, Yuusuke Dohi1, Hideki Nagano1, Tetsuya Yamamoto1, Takashi Matsui1, Issui Akishika1, Tadafumi Daitoku2(1.JFE, 2.Akita Prefectural Univ.)
[27]Development of a new evaluation apparatus for coking pressure
○Kotaro Ishimoto1, Kotaro Sakai1, Masahito Kitao1(1.Kansai Coke and Chemicals)
[28]Development of ceramic welding lance in combustion chamber
Daisuke Watanabe1, Takashi Haruna1, Shinzi Iwakiri1, Takahiro Harada1, ○Sho Shiratori1, Yuuki Kimura1(1.Kansai Coke and Chemicals)
[29]Improving management systems of coal blending for reducing quality variation of coke
○Ryota Kubo(Nippon Steel)
365 results ( 1 - 50 )
- 1
- ...