Session Details
Building structures /RC structures (6)
Sat. Nov 25, 2023 3:40 PM - 5:10 PM JST
Sat. Nov 25, 2023 6:40 AM - 8:10 AM UTC
Sat. Nov 25, 2023 6:40 AM - 8:10 AM UTC
G404 PACIFICO Yokohama North, 4F
Chairperson: Seitaro Tajiri (The University of Tokyo)
[Day3-G404-19]Experimental Study on Shear Crack Width of RC Beam Members with High-Strength Shear Reinforcement
*Yoshinari Hishikawa1, Sota Okazaki1, Hiroyuki Sakakibara1, Priyana Rajbhandari1, Susumu Kono1, Mukai David2 (1. Tokyo Institute of Technology, 2. Univ. of Wyoming)
[Day3-G404-20]Bond behavior of RC beams with curtailed bars confined with High-Strength Shear reinforcement
*Sota Okazaki1, Yoshinari Hishikawa1, Hiroyuki Sakakibara1, Priyana Rajbhandari 1, Susum KONO1, David Mukai2 (1. Tokyo Institute of Technology, 2. Univ. of Wyoming)
[Day3-G404-21]SHEAR STRENGTH OF HIGH STRENGTH REINFORCED CONCRETE COLUMN BY NONLINEAR 3-DIMENTION FINITE ELEMENT ANALYSIS
*Suzuka Tsukioka1, Yuji Ishikawa1 (1. Shibaura Institute of Technology)
[Day3-G404-22]Cyclic load tests of cantilever RC column supporting steel roofs in gymnasiums
*KAZUMA YAMANE1, Tetsuo Yamashita2, Koshiro Nishimura3, Yuki Terazawa3, Toru Takeuchi3 (1. Graduate School of Kogakuin University, 2. School of Architecture, Kogakuin University, 3. Tokyo Institute of Technology)
[Day3-G404-23]Shear Transfer Mechanism of High Strength Reinforced Concrete/Steel Fiber Reinforced Concrete columns
*Takanobu Harada1, Yuji Ishikawa2, Haruhi Nakagawa3 (1. Shibaura Institute of Technology, 2. Professor, Dr.Eng., Shibaura Institute of Technology, 3. Shimizu Corporation Institute of technology)
[Day3-G404-24]Study on a Multi-Spring model to improve experimental reproducibility of reinforced concrete columns subjected to variable axial forces
*Nanami Kawano1, Masato Sakurai1, Hideto Kanno1 (1. Akita Prefecture University)
[Day3-G404-25]EXPERIMENTAL STUDY ON SEISMIC BEHAVIOR OF SQUARE RC COLUMNS WITH LOW-BOND ULTRA-HIGH STRENGTH REBARS UNDER MULTIPLE REVERSED CYCLIC LOADS
*YUE WEN1, Gaochuang Cai1, Hayato Kikuchi1, Prafulla Bahadur Malla1 (1. KUMAMOTO UNIVERSITY)
