[G] Solid process/Solid and welding process | 日本金属学会2021年春期(第168回)講演大会

Advanced Search

Session Details

一般講演6.Materials Processing : Solid process/ Solid and welding process

[G]Solid process/Solid and welding process

Thu. Mar 18, 2021 1:30 PM - 4:40 PM JST
Thu. Mar 18, 2021 4:30 AM - 7:40 AM UTC

Rm. H ZoomRm.H

Chair:KENTA AOYAGI( Institute for Materials Research, Tohoku University), Masayuki OKUGAWA(Osaka University)

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

【講演順変更】都合により、No.87はNo.86の前に講演いたします。

1:30 PM - 1:45 PM JST(4:30 AM - 4:45 AM UTC)

[79]Powder behavior of Laser Powder Bed Fusion under decompression and heating environments

*Hirotsugu KAWANAKA¹, Shinji MATSUSHITA¹, Hyakka NAKADA¹, Noboru SAITOU² (1. Hitachi, Ltd., 2. Hitachi, Ltd. （Hitachi Construction Machinery）)

1:45 PM - 2:00 PM JST(4:45 AM - 5:00 AM UTC)

[80]Mechanical & Metallurgical Characterization of Additively Manufactured SKD61 under High Temperature Conditions

*Shinji MATSUSHITA¹, Hirotsugu Kawanaka¹, Hyakka Nakada¹, Kenta Aoyagi², Huakang Bian², Akihiko Chiba² (1. Hitachi, Ltd., 2. Tohoku Univ.)

2:00 PM - 2:15 PM JST(5:00 AM - 5:15 AM UTC)

[81]Optimization of Additive Manufacturing Conditions for SKD61 by Using Machine Learning

*Hyakka NAKADA¹, Shinji MATSUSHITA¹, Hirotsugu KAWANAKA¹ (1. Hitachi, Ltd.)

2:15 PM - 2:30 PM JST(5:15 AM - 5:30 AM UTC)

[82]Development of CPS compatible additive manufacturing system (I) – auto process mapping system

*Kenta AOYAGI^1,2, Manabu ONO^1,2, Kenta YAMANAKA^1,2, Akihiko CHIBA^1,2 (1. Institute for Materials Research, Tohoku University, 2. Technology Research Association for Future Additive Manufacturing)

2:30 PM - 2:50 PM JST(5:30 AM - 5:50 AM UTC)

break

2:50 PM - 3:05 PM JST(5:50 AM - 6:05 AM UTC)

[83]Study on Solidification Cracking of Ni-base Super Alloy using Selective Laser Melting Process

*Masakazu Tsujii^1,2, Houichi Kitano¹, Masahiro Kusano¹, Atsushi Yumoto², Makoto Watanabe¹ (1. NIMS, 2. Shibaura Institute of Technology)

3:05 PM - 3:20 PM JST(6:05 AM - 6:20 AM UTC)

[84]Optimization of Heat Source Model for Thermal Analysis of Selective Laser Melting

*Masahiro KUSANO¹, Houichi KITANO¹, Makoto WATANABE¹ (1. NIMS)

3:20 PM - 3:35 PM JST(6:20 AM - 6:35 AM UTC)

[85]Computational thermal Fluid Dynamics Analysis and Microstructure of Ti-15Mo-5Zr-3All Alloy Irradiated by Laser Beam for Additive Manufacturing

*Takumi MAEDA¹, Yuichiro KOIZUMI^1,2, Masayuki OKUGAWA^1,2, Hirotoshi KAWABATA¹, Takayoshi NAKANO^1,2, Takuya ISHIMOTO^1,2, Kouta KIMURA^1,2, Sekai SON^1,2 (1. Osaka University, 2. AM Research Center in Osaka University)

3:35 PM - 3:55 PM JST(6:35 AM - 6:55 AM UTC)

break

3:55 PM - 4:10 PM JST(6:55 AM - 7:10 AM UTC)

[87]AE monitoring of microdefects generation during modeling process by SLM method

*Kaita ITO¹, Rinako Kokaji², Masahiro Kusano¹, Takayuki Shiraiwa², Makoto Watanabe¹, Manabu Enoki² (1. NIMS, 2. The Univ. of Tokyo)

4:10 PM - 4:25 PM JST(7:10 AM - 7:25 AM UTC)

[86]Measurement of AE signals during the 3D additive manufacturing process

*Rinako KOKAJI¹, Kaita ITO², Masahiro KUSANO², Takayuki SHIRAIWA³, Makoto WATANABE², Manabu ENOKI³ (1. The Univ. of Tokyo, 2. NIMS, 3. The Univ. of Tokyo)

4:25 PM - 4:40 PM JST(7:25 AM - 7:40 AM UTC)

[88]Mechanism effect triggering grain boundary cracking in non-weldable superalloy Alloy713ELC fabricated by selective electron beam melting

*Yuchao LEI¹, Kenta Aoyagi², Kinya Aota³, Kosuke Kuwabara³, Akihiko Chiba² (1. Dpt. of Materials Processing, Tohoku Univ., 2. IMR, Tohoku Univ., 3. GRIT, Hitachi Metals, Ltd.)

Back to Category List