Session Details
[P]P216~P235
Tue. Sep 20, 2022 3:30 PM - 5:00 PM JST
Tue. Sep 20, 2022 6:30 AM - 8:00 AM UTC
Tue. Sep 20, 2022 6:30 AM - 8:00 AM UTC
FIT Arena
※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）
（質疑応答時間5分、基調講演と招待講演は5～10分）
[P216]Synthesis of MAX phase for MXene suitable for new catalyst supports
*Ryosuke Awatsu1, Norihito Sakaguchi2, Yuji Kunisada2 (1. Grad. School of Eng., Hokkaido Univ., 2. Faculty of Eng., Hokkaido Univ.)
[P217]Fabrication of Vanadium Oxide Films by Precise Oxidation of V Metal Foils
*Miho NAGATA1, Mitsuhiro MATSUDA2, Yuta HIMENO1, Kenji SHIDA3, Motohide MATSUDA2 (1. Grad. Sch. Sci. Tech. Kumamoto Univ., 2. Fac. Adv. Sci. Tech. Kumamoto Univ., 3. Tech. Div. Kumamoto Univ.)
[P218]Development of a Novel Folding Method for Deployable Rocket Nozzle Utilizing Superelastic Heat Treated Ti-4.5Al-3V-2Fe-2Mo Alloy Sheet
*Naoya Takahashi1, Hirboumi Tobe2, Eiichi Sato2 (1. The University of Tokyo, 2. ISAS/JAXA)
[P219]The effect of rolling on mechanical properties and microstructure of pure Cu and Cu-Cr alloy.
*Ryuto ADACHI1, REO KUMAKI1, TAKAHIRO MINETA1, HIROYUKI SATO1 (1. Grad. School of Science and Technology Hirosaki Univ.)
[P220]Synthesis of FeCo nitrides by nitridation starting from FeCo oxide.
*Takanari KAGA1, Hiroshi MIYAMURA1, Yusuke HATADA1, Kazumasa SUZUKI1, Jeyadevan Balachandran2 (1. The University of Shiga Prefecture, 2. Tohoku University)
[P221]Microstructure and high-temperature strength of Ti-Al-O alloys with HCP structure
*Hiroki OKAWA1, Toshihiro OMORI2, Ryosuke KAINUMA2 (1. 東北大工(院生)、2. 東北大工)
[P222]Effect of Fe Content on Phase Stability and Mechanical Properties of Ti-Fe-Al Alloys
*NANAHIRO ENDO1, Naoki Nohira1, Wan-Ting CHIU1, akira umise1, Masaki Tahara1, Hideki Hosoda1 (1. IIR, Tokyo Tech)
[P223]Effect of Texture and Dislocation Evolution on Ductility in Al-Mg Alloys
*Sega Nozawa1, Katsushi Matsumoto2, Shigeo Sato3 (1. Ibaraki Univ., 2. Kobe Steel, 3. Ibaraki Univ.)
[P224]Lueders Deformation Behavior Analysis in A1200 Alloy by In-situ XRD / DIC Simultaneous Measurement
*Itaru INOUE1, Tatsuya Kitano1, Masahiro Hirata1, Hiroki Adachi2 (1. Graduate School, Univ. of Hyogo, 2. Univ. of Hyogo)
[P225]First-principles analysis of the energetics of solute-atom clusters in Al-Mg-Si alloys in the early stage of aging
*Yasutaka Nomura1, Hajime Kimizuka2 (1. Nagoya Univ., 2. Nagoya Univ.)
[P226]Changes in electrical resistivity of Al-Si alloys fabricated by laser powder bed fusion due to low-temperature annealing
*Yoichiro KONISHI1, Naoki TAKATA2, Makoto KOBASHI2, Kazuhiro ISHIKAWA1, Yoji MIYAJIMA1 (1. Kanazawa Univ, 2. Nagoya Univ)
[P227]Comparison of composition dependence of polymorphism and structure in the LPSO phase formed in Mg-M-Y alloys
*Yuto HANDA1, Kohei SUZUKI2, Takaomi ITOI3, Seiji MIURA4, Toshiaki HORIUCHI5 (1. Chiba Univ, 2. Chiba Univ, 3. Chiba Univ, 4. Hokkaido Univ, 5. Hokkaido Univ of Science)
[P228]Microstructure observation and rollability at room temperature in FCC-type Mg-In alloys
*RYOTA NAGATA1, YOSHIKI TOMURA2, TAKAOMI ITOI3 (1. Chiba Univ., 2. Chiba Univ.(Present : Hitachi, Ltd.), 3. Chiba Univ.)
[P229]Change in Kink Microstructure and Yield Behavior in Double Compression Test of
LPSO-Mg Alloy
*Yuri UEDA1, Ryutaro MATSUMURA1, Yuri SHINOHARA2, Tomotaka MIYAZAWA3, Toshiyuki FUJII3, Tomonari INAMURA2 (1. Graduate student, Tokyo Tech., 2. IIR, Tokyo Tech., 3. Department of Materials Science and Engineering, Tokyo Tech.)
[P230]Complex high temperature creep behavior and microstructure change
of heat-treated duplex Mg-Li-Al-Zn alloy
*haruto saijo1, Mineta Takahiro1, Sato Hiroyuki1 (1. Grad. School of Science and Technology Hirosaki Univ.)
[P231]Indentation and pop-in behavior of pure magnesium single crystals using micro indentation tester
*Ryu OKUBO1, Kazutoshi Goto2, Hiromoto Kitahara3, Shinji Ando3 (1. Kumamoto Univ., 2. Kumamoto Univ. (Otsuka Pharmaceutical, Ltd.), 3. Kumamoto Univ. / MRC)
[P232]Three point Bending Deformation Behavior of Magnesium-Yttrium Single Crystals
*Takaya FUJIHARA1, sho Furukawa2, Hiromoto Kitahara3, Shinji Ando3 (1. Kumamoto Univ., 2. Kumamoto Univ. (Present: NSK, Ltd.), 3. Kumamoto Univ. / MRC)
[P233]Cutting temperature, cutting behavior and surface microstructure of Ti–6Al–4V under high-speed machining
*Kanji ISHITAKA1, Masaki MATSUDA1, Shinichi HUNASE1, Takashi UEDA2, Atsushi TOMIZAWA1, Hyung-Won PARK1 (1. Komatsu University, 2. Kanazawa University)
[P234]Experimental Verification of Diffusion Blocking phenomena and evaluation of diffusion coefficients in Ni-Al-V alloys
*TETSUSHIN ON1, HENGXIN XU1, SHOICHI HIROSAWA2,3, MITSUHIRO OOTAKI2,3, MAKOTO TANIMURA2,3 (1. Yokohama National University Graduate School of Engineering Science, 2. Yokohama National University Graduate School of Engineering Science)
[P235]Initial creep damage and magnetic properties of ASME Gr. 91 and Gr. 92 heat resistant steels
*Shota KUJI1, Akito Kunieda2, Kazuyuki Shimizu2, Yasuhiro Kamada2, Noriyuki Ishii3, Yasushi Hasegawa3 (1. Iwate Univ (M1), 2. Iwate Univ, 3. NIPPON STEEL TECHNOLOGY)