[G] Solid process/ Solid and welding process(2) | 日本金属学会2023年春期(第172回)講演大会

Session Details

一般講演6.Materials Processing : Solid process/ Solid and welding process

[G]Solid process/ Solid and welding process(2)

Thu. Mar 9, 2023 12:45 PM - 5:00 PM JST
Thu. Mar 9, 2023 3:45 AM - 8:00 AM UTC

Rm. L Rm.1312,1st Flr.,Buld.No.13

Chair:KENTA AOYAGI(Institute for Materials Research, Tohoku University), Masayuki OKUGAWA(Osaka University),Kazuhito Ito(Osaka Univ.)

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間5分、基調講演と招待講演は5～10分）

12:45 PM - 1:00 PM JST(3:45 AM - 4:00 AM UTC)

[319]High-Temperature Microstructural Stability of Single-Crystal Pure Ni Fabricated using a Flat-Top Beam Profile in Laser Powder Bed Fusion

*Dennis　Edgard Jodi^1,2, Tomonori Kitashima^1,2, Alok Singh¹, Makoto Watanabe¹ (1. NIMS, 2. Kyushu Univ.)

1:00 PM - 1:15 PM JST(4:00 AM - 4:15 AM UTC)

[320]Modulated structure formation in dislocation cells in 316L stainless steel fabricated by laser powder bed fusion

*Fei SUN¹, Toshio Ogawa¹, Yoshitaka Adachi¹, Hazuhisa Sato², Shunya Takagi², Goro Miyamoto^3,4, Asuka Suzuki¹, Akinori Yamanaka⁵, Nobuo Nakada⁶, Takuya Ishimoto⁷, Takayoshi Nakano², Yuichiro Koizumi² (1. Nagoya University, 2. Osaka University, 3. Tohoku University, 4. National Institute for Materials Science, 5. Tokyo University of Agriculture and Technology, 6. Tokyo Institute of Technology, 7. University of Toyama)

1:15 PM - 1:30 PM JST(4:15 AM - 4:30 AM UTC)

[321]Effect of scan strategy on grain selection and monocrystallization in laser powder bed fusion with a flat-top laser beam

*Tomonori KITASHIMA^1,2, Dennis　Edgard Jodi^1,2, Makoto Watanabe¹ (1. NIMS, 2. Kyushu Univ.)

1:30 PM - 1:45 PM JST(4:30 AM - 4:45 AM UTC)

[322]Microstructure and solute segregation in LPBF 316L stainless steel observed by TEM

*Kazuhisa Sato¹, Shunya Takagi¹, Satoshi Ichikawa¹, Takuya Ishimoto^2,3,4, Takayoshi Nakano^2,3 (1. Research Center for UHVEM, Osaka Univ., 2. Grad. School of Eng., Osaka Univ., 3. AM Center, Osaka Univ., 4. Aluminium Research Center, Univ. Toyama)

1:45 PM - 2:00 PM JST(4:45 AM - 5:00 AM UTC)

[323]Microstructure and printability in laser powder bed fusion of Al-10Si-4.5Mg alloy

*Yuki OTANI¹, Naoki TAKATA², Asuka SUZUKI², Makoto KOBASHI², Masaki KATO³ (1. Nagoya Univ., 2. Nagoya Univ., 3. Aichi Center for Industry and Science Technology)

2:00 PM - 2:15 PM JST(5:00 AM - 5:15 AM UTC)

[324]Heat treatment and mechanical property of Addictive manufacture of refractory alloy C103

*Yalatu SU¹, Kazuto Arakawa², Tetsuji Kuse¹, Hideki Wakabayashi², Renki Shirasu², Kohei Takeda¹, Norio Higuchi¹, Hitoshi Sakai¹, Yugo Higashida³, Masato Inata³ (1. NTT Data XAM Technologies Corporation, 2. Shimane University, 3. Kiguchi Technics Inc)

2:15 PM - 2:30 PM JST(5:15 AM - 5:30 AM UTC)

break

2:30 PM - 2:45 PM JST(5:30 AM - 5:45 AM UTC)

[325]In-situ observation of powder spreading in powder bed fusion additive manufacturing process using particle image velocimetry method

*SEUNGKYUN YIM¹, JIAYU SUN¹, KENTA AOYAGI¹, KENTA YAMANAKA¹, AKIHIKO CHIBA¹ (1. Institute for Materials Research, Tohoku University)

2:45 PM - 3:00 PM JST(5:45 AM - 6:00 AM UTC)

[326]Effect of heat treatment on the characteristic of hydrogen embrittlement resistance alloy

*Tetsuji Kuse¹, Yalatu Su¹, Yugo Higashida², Kohei Takeda¹, Norio Higuchi¹, Hitoshi Sakai¹ (1. NTT DATA XAM Technologies Corp., 2. KIGUCHI TECHNICS Inc.)

3:00 PM - 3:15 PM JST(6:00 AM - 6:15 AM UTC)

[327]Control of thermal history related to sample geometry in laser powder bed fusion

*Masahiro KUSANO¹, Makoto WATANABE¹ (1. National Institute for Materials Science)

3:15 PM - 3:30 PM JST(6:15 AM - 6:30 AM UTC)

break

3:30 PM - 4:00 PM JST(6:30 AM - 7:00 AM UTC)

[328]Multi-scale modeling of microstructure formation in additive manufacturing of metallic alloys

*Damien Tourret¹, Rouhollah Tavakoli¹, Mohammad Elahi^1,2, Ignacio Romero^1,2 (1. IMDEA Materials Institute, 2. Universidad Politecnica)

4:00 PM - 4:15 PM JST(7:00 AM - 7:15 AM UTC)

[329]Effect of Excess Vacancies Induced by Laser Irradiation for Additive Manufacturing on Spinodal Decomposition in Fe-Cr-Co Alloys

*Yuheng LIU¹, Daichi Izumikawa¹, Masayuki Okugawa^1,2, Kazuhisa Sato³, Yuichiro Koizumi^1,2, Takayoshi Nakano^1,2 (1. Osaka Univ., 2. Osaka Univ. AM center, 3. Osaka Univ. UHVEM)

4:15 PM - 4:30 PM JST(7:15 AM - 7:30 AM UTC)

日本金属学会2023年春期(第172回)講演大会

Session Details