[1-1A(S)]Synthesis of La-Zn doped SrM ferrite under high oxygen pressure
〇Takeshi Waki1, Yoshikazu Tabata1, Hiroyuki Nakamura1(1.Kyoto University)
Autumn Meeting of the Japan Society of Powder and Powder Metallurgy, 2020
Oct 27 - Oct 29, 2020Online
You can search for presentations in this event.
Search
Autumn Meeting of the Japan Society of Powder and Powder Metallurgy, 2020
Oct 27 - Oct 29, 2020Online
You can search for presentations in this event.
SearchSearch Results(172)
[1-2A(V)]Grinding behavior of Sm2Fe17 alloy powder by surfactant assisted planetary ball milling
〇Akihito Fukui1, Emma Calvert2, Koji Shimojima2, Hiroyuki Hosokawa2, Makoto Takagi1(1. Aichi Institute of Technology, 2.National Institute of Advanced Industrial Science and Technology)
[1-3A(V)]Magnetic properties of Sm-Fe-N magnets prepared by spark plasma sintering
〇Tetsuji Saito Saito1(1.Chiba Institute of Technology)
[1-4A(A)]Machine learning prediction for nitrogen and oxygen contents of Sm-Fe-N alloy
〇Hiroyuki Hosokawa1, Koji Shimojima1, Emma Lucy Calvert1, Akihito Fukui2(1.National Institute of Advanced Industrial Science and Technology , 2.Aichi Institute of Technology)
[1-5A(V)]Electromagnetic wave absorption properties of resin composites using α-Fe/Co0.5Fe2.5O4 mixed powders
〇Hirotaka Asa1, Saijian Ajia1, Mitsuharu Sato1, Masashi Matsuura1, Nobuki Tezuka1, Satoshi Sugimoto1(1.Tohoku university)
[1-49A(V)]High frequency properties and noise suppression performance of composite sheet of iron-based powder
〇Mitsuharu SATO1, Yuichiro TOYODA1, Saijian AJIA1, Masashi MATSUURA1, Nobuki TEZUKA1, Satoshi SUGIMOTO1(1.Tohoku University)
[1-6A(V)]Influence of core density on coercive force of iron powder core
〇Takuya Ozaki Takashita1, Yukiko Ozaki2(1.JFE steel corporation, 2.Kyushu university)
[1-7A(S)]Magnetic Properties of High Hardness Fe-Cr Soft Magnetic Alloys by MIM Process
〇Masahiro Kimura1, Toru Shimizu2, Hisaki Watari2(1.NIPPON PISTON RING CO.,LTD., 2.TOKYO DENKI UNIVERSITY)
[1-8A(V)]Magneto-electric effect of Mg and Nb added aluminum nitride/cobalt ferrite multiferroic multilayered films.
〇Hiroki Sato1, Kenji Kamishima1, Koichi Kakizaki1(1.Saitama University)
[1-9A(V)]Perpendicular magnetic anisotropy of the Cobalt ferrite thin films deposited on seed layers
〇Daiki ISURUGI1, Kenji KAMISIMA1, Kouichi KAKIZAKI1(1.Saitama University)
[1-10A(V)]Soft magnetic properties of FeCo based alloy -(C4F8)n granular thin films
〇Quangui Hao1, Kenji Kamishima1, Koichi Kakizaki1(1.Saitama University)
[1-11A(V)]Influence on alternating magnetization of humic-acid modified iron-oxide nanoparticles by interaction with Cu ions
Yuki Harada1, 〇Yoshitaka Kitamoto1(1.Tokyo Institute of Technology)
[2-1(V)]Memorial Lecture of JSPM Award
Development of Chemical Synthesis Methods Based on Fusion of Inorganic and Organic Chemistry for Ceramic Powder Preparation and Surface Modification Methods of Nanoparticles and Nanosheets
〇Yoshiyuki SUGAHARA1(1.Waseda University)
[2-2(V)]Memorial Lecture of JSPM Award
Liquid phase synthesis of ceramics nanostructures
〇Yoshitake Masuda1(1.National Institute of Advanced Industrial Science and Technology (AIST))
[2-3(V)]Memorial Lecture of JSPM Award
Development of Nanoporous Metal Powder by Liquid Metal Dealloying
Hidemi KATO1, 〇Takeshi WADA1(1.Institute for Materials Research, Tohoku University)
[2-4(V)]Special Invited Talk : Brickworks of rectangular nanoblocks: 1D-3D ordered arrangements and their functions
〇Hiroaki IMAI1(1.Keio University)
[2-5(V)]Special Invited Talk : Nanostructure-induced magnetic functionalities of oxide thin films
〇Katsuhisa Tanaka1(1.Kyoto University)
[2-6(V)]Invited Talk : Synthesis and structural analysis of BaTiO3 crystal including OH group
〇Miki Inada1(1.Kyushu University)
[2-7(V)]Invited Talk : Controlled synthesis and hybridization methods of inorganic nanosheets
〇Minoru Osada1(1.Institute of Materials and Systems for Sustainability (IMaSS), Nagoya University)
[2-8(V)]Invited Talk : Colloidal Synthesis of Heavy-Metal-Free Quantum Dot Powder Towards Optical Applications
〇Naoto Shirahata1(1.National Institute for Materials Science)
[2-9(V)]Invited Talk : Hollow silica nanoparticles: a tiny pore with big dreams
〇Chika Takai1, Masayoshi Fuji2(1.Gifu University, 2.Nagoya Institute of Technology)
[2-10(V)]Invited Talk : Solution-Processed Coppor Oxide Nano-structures Applicable to Sensor
〇Nobuhiro MATSUSHITA1, Ryosuke NITTA1, Yuta KUBOTA1(1.Tokyo Institute of Technology)
[2-11A(S)]Mesoporous Iron-doped MoS2/CoMo2S4 Heterostructures through Organic–Metal Cooperative Interactions on Spherical Micelles for Electrochemical Water Splitting
〇Yanna GUO1, Jing TANG3, Joel HENZIE2, Bo JIANG2, Yusuke YAMAUCHI2,3, Yoshiyuki SUGAHARA1(1.waseda university, 2.National Institute for Materials Science (NIMS), 3.University of Queensland)
[2-12A(V)]Alumina Coating on Nano Particle by Metal Alkoxide Process
〇Hokuto Suzuki1, Daiki Miura1, Shigehito Hirai1, Takeshi Matuda1, Tomoya Ohno1, Hisao Suzuki2(1.kitami Institute of Technology , 2.Shizuoka University)
[2-13A(S)]Preparation of Dual-functional Janus nanosheets with thermoresponsiveness and cation exchangeability and their application as a cation adsorbent
〇Ryoko SUZUKI1,4, Naokazu IDOTA2, Taisei NISHIMI3, Yoshiyuki SUGAHARA1,4(1.Waseda university, 2.Tokyo Institute of Technology, 3.Japan Technological Research Association of Artificial Photosynthetic Chemical Process (ARPChem), 4.Kagami Memorial Research Institute for Materials Science and Technology)
[2-14A(V)]Synthesis of CNF/Si nanoparticles composite and application for fluorescent materials
〇Takafumi Sudo1, Kunihiko KATO2, Yunzi XIN2, Hien Huu NGUYEN2, Takashi SHIRAI1,2(1.Nagoya Institute of Technology, 2.Nagoya Institute of Technology Advanced Ceramics Research Center)
[2-15A(S)]Photochromic properties of cesium tungsten bronze nanoparticles by spray pyrolysis
〇Shuhei Nakakura1, Takashi Ogi2(1.Ichikawa Research Center, Sumitomo Metal Mining Co., Ltd,, 2.Graduate School of Advanced Science and Engineering, Hiroshima University)
[2-16A(V)]Synthesis of polycrystalline nanoparticles via microwave rapid heating and enhancement of optical properties
〇Taku Nagata1, Kunihiko KATO2, Yunzi XIN2, Hien Huu NGUYEN2, Takashi SHIRAI1,2(1.Nagoya Institute of Technology, 2.Nagoya Institute of Technology Advanced Ceramics Research Center)
[2-17B(V)]Electrostatic integrated granules formation and their mechanism elucidation
〇Koki Nakamura1, Atsushi Yokoi1, Tan Wai Kian1, Go Kawamura1, Atsunori Matsuda1, Hiroyuki Muto1(1.Toyohashi University of Technology)
[3-1(V)]Memorial Lecture of JSPM Award
Analyses of consolidation behavior of powder particles and microscopic sintered structure-Afterword of analytical approach to higher performances of PM materials
〇Yukiko Ozaki1(1.Material Science and Engineering, Kyushu University)
[3-2(S)]Special Invited Talk : Microstructure-controlled high performance TiNi sintered alloys for medical devices
〇Katsuyoshi KONDOH1, Takayuki YONEZAWA1, Tomoki EDA1, Junko UMEDA1(1.Osaka University)
[3-3(S)]Invited Talk : Improvement of Sintered Density and Young's modulus in Low-alloyed Sintered Steels by means of Additional Metallic Boride Powders
〇Nobuhiko Matsumoto1, Toshitake Miyake1, Mikio Kondoh2, Yusuke Oishi3, Kazuhiro Toyama3(1.Toyota Central R&D Labs., Inc., 2.Former Employee of Toyota Central R&D Labs., Inc., 3.Toyota Motor Corporation)
[3-4A(A)]Sinterability improvement of aluminum bronze powder and its sintering mechanism
〇Sho SHINOHARA1, Yoichiro SHIMPO1, Yoshiro ARAMI1(1.FUKUDA metal foil & powder co., LTD.)
[3-5A(A)]Sinterability and age-hardenability of Cu-Fe-P alloy powder
〇Yuta KIGOSHI1, Satoru MIYAKAWA1, Yoichiro SHIMPO1, Yoshiro ARAMI1(1.Fukuda Metal Foil & Powder Co., Ltd.)
[3-6A(V)]Evaluation of material properties of Ni-based superalloy powder compacts by controlled atmosphere sinter-compression tests
〇Kentaro Kudo1, Kazunari Shinagawa1(1.Kyushu University)
[3-7(V)]Special Invited Talk : Fabrication of Bulk Thermoelectric Materials by a Hot-extrusion Technique
〇Zhongchun Chen1(1.Tottori University)
[3-8A(V)]Influences of PLA addition on synthesis and thermoelectric properties of higher manganese silicide
〇Kazuya SHIMIZU1, Takashi ITOH1(1.Nagoya University)
[3-9A(V)]Evaluation of morphological and thermoelectric properties of Mg3Sb2 foamed by combustion synthesis
〇Takashi KOGA1, Takashi ITOH1(1.Nagoya University )
[3-10A(V)]Elucidation of reaction process for combustion synthesis reaction of Al-Ti system induced at lower temperature by Al-Si eutectic reaction
〇Hiroyuki Shimada1, Asuka Suzuki1, Naoki Takata1, Makoto Kobashi1(1.Nagoya University )
[3-11A(V)]In-situ X-ray observations of combustion foaming behavior and pore structure evaluations of porous Al3Ti matrix composites with stabilization agent addition
〇Takamasa Inukai1, Asuka Suzuki1, Naoki Takata1, Makoto Kobashi1, Yuji Okada2, Yuichi Furukawa2(1.Nagoya University, 2.TOYOTA MOTOR CORPORATION)
[3-12A(V)]Fabrication of Aluminum-graphite Heat Dissipation Composites by a Hot-extrusion Technique
〇Li-fu Yi1, Masaki Maeda1, Tetsuhiko Onda1, Zhong-Chun Chen1(1.Tottori University)
[4-1B(V)]Production of yttrium aluminate using corrosion reaction of aluminum
〇Keita AYAKI2, Daichi SASAKI1, Masahiro SAKAI1, Hiroyuki FUJIKI1(1.Muroran Institute of Technology, 2.Muroran Institute of Technology, Graduate Student)
[4-2A(V)]Elemental substitution effects and physical properties of Delafossite-type oxides with triangular lattice
〇Koshiro INUI1, Masaki KATO1, Ken HIROTA1(1.Doshisha University)
[4-3A(V)]Oxidation behavior of skutterudite-based thermoelectric materials in high-tempertature atmosphere
〇Shigeru Katsuyama1, Kentaro Takada1(1.Osaka University)
[4-4A(V)]Nanosurface modification of titanium oxide using microwave-induced plasma for enhancement of photocatalytic performance
〇Kunihiko KATO1, Yunzi XIN1, Hien Huu Nguyen1, Takashi Shirai1(1.Nagoya Institute of Technology)
[4-5A(V)]Synthesis of Tridymite Phase Using Silica Brick Wastes
〇Tomoko KITANI1, Takeshi SHIONO1(1.Kyoto Institute of Technology)
[4-6A(V)]Elemental substitution effects and physical properties of vanadium oxides with characteristic structure
〇Yotaro KOBAYASHI1, Masaki KATO1, Ken HIROTA1(1.Doshisha University)
[4-7A(V)]Enhancement of electrical conductivity of ceramics carbon composite by iodine impregnation
〇Yuya Takeuchi1, Yunzi XIN2, Hien Huu NGUYEN2, Kunihiko KATO2, Takashi SHIRAI1,2(1.Nagoya Institute of Technology, 2.Nagoya Institute of Technology Advanced Ceramics Reseach Center)
[4-8A(V)]Search for negative thermal expansion in Ti substituted PbCrO3
〇Kana MATSUNO1, Yuki SAKAI2, Takumi NISHIKUBO1, Masaki AZUMA1(1.Laboratory for Materials and Structures, Tokyo Institute of Technology, 2.Kanagawa Institute of Industrial Science and Technology)
[4-9A(V)]Synthesis of titanium nitride from titanium oxides and boron nitride
〇Takahiro YAMADA1, Toru SEKIYA1,2, Hisanori YAMANE1(1.Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, 2.Graduate School of Engineering, Tohoku University)
172 results ( 1 - 50 )
- 1