[1-1]Special Invited Talk :Heat treatment technology in the decarbonized society
〇Takuya OHNISHI1, Hitoshi KABASAWA1(1.NIHON TECHNO CO., LTD.)
Autumn Meeting of the Japan Society of Powder and Powder Metallurgy, 2021
Nov 9 - Nov 11, 2021Online
You can search for presentations in this event.
Search
Autumn Meeting of the Japan Society of Powder and Powder Metallurgy, 2021
Nov 9 - Nov 11, 2021Online
You can search for presentations in this event.
SearchSearch Results(177)
[1-2A]Effect of carburized atmosphere on mechanical strength of Fe-Cr sintered material
〇Tsukasa Yamada1, Kentaro Kudo1, Masatoshi Aramaki1, Kazunari Sinagawa1, Hideshi Miura1, Yukiko Ozaki1, Hidehisa Sakuta2, Takuya Ohnishi3(1.KYUSHU UNIVERSITY, 2.NIHON PARKERISING, 3.NIHON TECHNO)
[1-3A]Influence of sintered density and carburizing depth on the tensile strength of Fe-Mo-Cu-C sintered and carburized materials
〇Takuya Takashita1, Shigeru Unami1(1.JFE steel corporation)
[1-4]Invited Talk : Advance recycling of in-process waste Ti material using powder metallurgy route and its applications
〇Katsuyohi KONDOH1, Shota KARIYA1, Junko UMEDA1(1.Osaka University)
[1-5A]Catalytic activity of hydrogen evolution of Co-nanocrystal-doped tungsten carbide prepared using recycled-resources from metropolitan mines of cemented carbides
〇Masao Morishita1, Yuki Tachibana1, Kairi Araki1, Ai Nozaki1, Hiroaki Yamamoto1, Hidefumi Yanagita2(1.Department of Chemical Engineering and Materials Science, 2.Sanalloy Industry CO., LTD.)
[1-6A]Improvement of crystallinity of Sm2Fe17 powder pulverized by jet milling
〇Akihide Hosokawa1, Wataru Yamaguchi1, Kenta Takagi1(1.National Institute of Advanced Industrial Science and Technology)
[1-7A]Magnetization reduction in sintering jet-milled Sm2Fe17N3 powders
〇Wataru YAMAGUCHI1, Akihide HOSOKAWA1, Kenta TAKAGI1(1.AIST)
[1-8A]Microstructure analysis of Zn added Sm2Fe17N3 sintered magnets
〇Hirotaka Yokota1, Yoshitomo Tanaka1, Ryuji Hashimoto1, Shusuke Okada2, Kenta Takagi2(1.TDK Corporation, 2.National Institute of Advanced Industrial Science and Technology)
[1-9A]Production of Sm-Fe-N magnets by spark plasma sintering
〇Tetsuji Saito1(1.Chiba Institute of Technology)
[1-10A]Magnetic properties of Sm2(Fe, Co, Ga)17Cx fine powders
〇Tokuyuki Nakayama1, Masashi Matsuura2, Satoshi Sugimoto2(1.Sumitomo Metal Mining Co., Ltd., 2.Tohoku University)
[1-11A]Magnetic properties of hexagonal strontium M-type ferrite thin films prepared by MOD
〇Daiki KATO1, Kenji KAMISHIMA1, Koichi KAKIZAKI1(1.Saitama University)
[1-12A]Phase stability of W-type ferrite under high oxygen pressure
〇Takeshi Waki1, Shinji Nakai1, Yoshikazu Tabata1, Hiroyuki Nakamura1(1.Kyoto University)
[1-13A]Domain structure control of epitaxial YbFe2O4 thin films and their magnetic properties
〇Mayu NOZAKI1, Takumi SAKAGAMI1, Jun KANO1, Naoshi IKEDA1, Tatsuo FUJII1(1.Okayama University)
[1-14A]Perpendicular magnetization of room-temperature
ferrimagnetic quadruple perovskite CeCu3Mn4O12
〇Kei Shigematsu1,2, Keisuke Shimizu1, Kazumasa Yamamoto1, Takumi Nishikubo1,2, Yuki Sakai1,2, Sergey A Nikoleav1,3, Hena Das1,3, Masaki Azuma1,2(1.Laboratory for Materials and Structures, Tokyo Institute of Technology, 2.KISTEC, 3.Tokyo Tech World Research Hub Initiative (WRHI), Tokyo Institute of Technology)
[1-15A]Electrostatic Influence on Dynamic Magnetization Behaviors of
Iron-oxide Nanoparticles in Hydrogels Using Charged Polymers
〇Wibias MULIAWAN1, Yuta KURASHINA1, Yoshitaka KITAMOTO1(1.Tokyo Institute of Technology)
[1-16A]Influence of Annealing temperature and iron powder particle size on the coercive field of iron powder cores
〇Takuya Takashita1, Yukiko Ozaki2(1.JFE steel corporation, 2.Kushu university)
[1-17A]FeBNbP Nanocrystalline Alloy Powder with High Amorphous Forming Ability and High Bs
〇Akito Hasegawa1, Hironobu Kumaoka1, Yoshiki Kajiura1, Masakazu Hosono1, Kazuhiro Yoshidome1, Satoko Mori1, Kenji Horino1, Hiroyuki Matsumoto1(1.TDK Corporation)
[2-1]Memorial Lecture of JSPM Award
Experience and study of electronic ceramics development
〇Takehiro KONOIKE
[2-2]Invited Talk: Development trends of small case size metal type power inductor
〇Masanori NAGANO1(1.TAIYO YUDEN CO., LTD.)
[2-3]Invited Talk: All-solid-state battery using oxide-based solid electrolyte
〇Takanori NAKAMURA1(1.Murata Manufacturing Co., Ltd.)
[2-4]Invited Talk: Utilization of sensing technology for a new normal society
〇Jun Iida1(1.TDK)
[2-5]Invited Talk: Yin, Yang, and mistery of AC poling for lead perovskite based piezoelectric single crystals
〇Yohachi Yamashita1, Yiqin Sun1, Tomoaki Karaki1(1.Toyama Prefectural University)
[2-6]Memorial Lecture of JSPM Award
Development of Negative Thermal Expansion Fine Particles
〇Koshi TAKENAKA1, Nobuya YAMADA2(1.Nagoya University, 2.Chemical Gate Co., Ltd.)
[2-7A]Development of ceramic composite materials with segregated three-dimensional conductive network structure using composite granules.
〇Yusaku Sato1, Atsushi Yokoi1, Tan Wai Kian1, Go Kawamura1, Hiroyuki Muto1, Atsunori Matsuda1(1.Toyohashi university of technology)
[2-8B]Aerosol deposition of functional thick films using composite particles obtained by electrostatic integrated assembly
〇Shun Wakabayashi1,2, Atsushi Yokoi1, Wai Kian Tan1, Go Kawamura1, Atsunori Matsuda1, Naoyuki Fujita2, Hiroyuki Muto1(1.Toyohashi University of Technology, 2.National Institute of Technology, Nara College)
[2-9]Invited Talk: Autonomous materials synthesis by machine learning and robotics
〇Taro Hitosugi1(1.Tokyo Institute of Technology)
[2-10]Invited Talk: A comprehensive development of material, manufacturing, and measurement for beyond-5G and 6G
〇Seitaro Kon1(1.AIST)
[2-11A]Distribution design of rare earth elements for multilayer ceramic capacitors with high reliability
〇Yuta Saito1, Tsuyoshi Sogabe1, Tomoya Hagiwara1, Katsuya Taniguchi1, Shinichi Abe1, Nobuhiro Sasaki1(1.TAIYO YUDEN CO.,LTD.)
[2-12]Memorial Lecture of JSPM Award
Quest for Giant Negative Thermal Expansion Materials
〇Masaki Azuma1, Kengo Oka2, Hajime Yamamoto3, Yuki Sakai4(1.Laboratory for Materials and Structures, Tokyo Institute of Technology, 2.Faculty of Science and Engineering, Kindai University, 3.Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, 4.Kanagawa Institute of Industrial Science and Technology)
[2-13A]Formation and control of ferroelectric and ferromagnetic stripe domains in multiferroic BiFe0.9Co0.1O3 thin films utilizing trailing fields
〇Takuma Itoh1, Marin Katsumata1, Kei Shigematsu1,2, Masaki Azuma1,2(1.Tokyo Institute of Technology, 2.KISTEC)
[2-14A]Structural phase transition and thermal stability of layered hybrid perovskite (MA)2PbI2-xBrx(SCN)2
〇Takuya OHMI1, Tomoaki MIURA2, Tadaaki IKOMA2, Masaki AZUMA1, Takafumi YAMAMOTO1(1.Tokyo Institute of Technology, 2.Niigata University)
[3-1]Invited Talk: Excellent Strength and Ductility Balance of Middle Mn Ultrafine Structured Martensitic Steels
〇Shiro Torizuka1, Atsushi Ito1, Yusuke Suzuki1(1.The graduate School of Engineering, University of Hyogo)
[3-2B]Electron irradiation - electron excitation induced structural change in nano particles
〇Takeshi Nagase1(1.University of Hyogo)
[3-3B]Preparation of iron oxides from Fe-Al alloys and hydrogen generation over Its Ru-supported catalyst
〇Tomoya SUMIDA1, Ai NOZAKI1, Hiroaki YAMAMOTO1, Masao MORISHITA1(1.University of HYOGO)
[3-4]Invited Talk : Theoretical analysis on the possibility of sluggish-diffusion in high-entropy alloys
〇Toshiyuki Koyama1(1.Tokai National Higher Education and Research System, Nagoya University)
[3-5A]Interdiffusion in Co-Fe-Mn alloys
〇Sri Pragna PENDEM1, Nobufumi UESHIMA1, Katsunari OIKAWA1(1.Tohoku University)
[3-6B]Decoupling between thermodynamic and dynamical glass transitions in high-entropy metallic glasses
〇jing JIANG1, Hidemi Kato1(1.Tohoku University)
[3-7A]Temperature dependency of plastic deformation behavior in high entropy alloys
〇Daixiu Wei1, Hidemi Kato1(1.Institute for Materials Research, Tohoku University)
[3-8A]Thermodynamic and kinetic Insights into the glass-forming ability of Pd20Pt20Ni20Cu20P20 High-entropy bulk metallic glass
〇Yusuke Ohashi1, Takeshi Wada2, Kato Hidemi2(1.Tohoku university , Graduate School of Engineering, , 2.Institute for Materials Research)
[3-9A]Powder design via electrostatic integrated assembly and its prospect for high entropy materials fabrication by powder metallurgy
〇Wai Kian Tan TAN1, Atsushi YOKOI1, Go KAWAMURA2, Atsunori MATSUDA2, Hiroyuki MUTO1,2(1.Institute of Liberal Arts and Sciences, Toyohashi University of Technology, 2.Department of Electrical and Electronic Information Engineering, Toyohashi University of Technology)
[3-10]Invited Talk : Improved mechanical properties of metallic glass by 2D gradient rejuvenation
〇Junji Saida1, Rui Yamada1, Haruka Isano1, Tomohiro Yoshikawa1, Wookha Ryu2(1.Tohoku University, 2.Seoul National University)
[3-11A]Mechano-chemical segregation of Y in a Fe-based bulk metallic glass at room temperature
〇Dmitri LOUZGUINE1,2, A. S. S. Trifonov3,4, Yu. P. P. Ivanov5,6, A. K. A. K. A. Lu2, A. V. V. Lubenchenko7, A. L. L. Greer5,1(1.Advanced Institute for Materials Research (WPI-AIMR), Tohoku University, 2.Mathematics for Advanced Materials-OIL, National Institute of Advanced Industrial Science and Technology (AIST), 3.National University of Science and Technology “MISiS”, 4.Physics Faculty, Lomonosov Moscow State University, 5.Department of Materials Science & Metallurgy, University of Cambridge, 6.School of Natural Sciences, Far Eastern Federal University, 7.Department of General Physics and Nuclear Fusion, National Research University “Moscow Power Engineering Institute”)
[3-12B]Soot combustion over porous CeO2 prepared from Ce–Al amorphous alloy
〇Ami NISHI1, Ai NOZAKI1, Hiroshi ICHIWARA1, Hiroaki YAMAMOTO1, Masao MORISHITA1(1.University of HYOGO)
[3-13B]Differences in the solid state amorphization behaviors between fast electron irradiation-frenkel pairs introdunction and electron irradiation-electronic excitation
〇Takeshi Nagase1(1.University of Hyogo)
[3-14A]Fabrication of amorphous Si using eutectic reaction
〇Junpei T. Okada1, Koji Nakayama1, Takeshi Wada1, Hidemi Kato1(1.IMR, Tohoku Univ.)
[3-15A]Rapid solidiication of eutecitc alloy system with skewed coupled zone
〇Rui Yamada1, Junpei T. Okada2, Takeshi Wada2, Haruka Isano3, Tomohiro Yoshikawa3, Junji Saida1(1.Frontier Research Institute for Interdisciplinary Sciences, Tohoku University, 2.Institute for Materials Research, Tohoku, University, 3.Graduate School of Engineering, Tohoku University)
[3-16A]Thermal properties of Zr-Al-Cu-Ni-Nb metallic glass with ductility
〇Kenji AMIYA1, Jin Nishigaki2(1.Institute for Materials Research, Tohoku University, 2.University of Hyogo)
[4-1]Memorial Lecture of JSPM Award
Productization and establishment of manufacturing technology for advanced cutting tool materials
〇Ken Ishii1(1.KYOCERA Corporation)
[4-2A]Fabrication of WC-Ni hard coatings by wet plating gas carburizing composite method
〇Hiroki OBA1, Daichi KYUKO1, Kotaro MUROTANI1, Masayuki NAKAGAWA2, Yasuyoshi SAITO3, Hiroshi SAITO4, Motofumi OHKI4(1.Graduate School of Science and Technology, Niigata Univ., 2.Industrial Res. Inst. of Niigata Pref., 3.Tokyo Metropolitan Industrial Technol. Res. Inst., 4.Faculty of Eng., Niigata Univ.)
[4-3A]Effects of Nb amount on mechanical properties and the microstructure of W–Ti–Ta–Nb–C high-entropy ceramics
〇Koki Sato1, Takashi Sekine2, Shigeaki Sugiyama2, Akihiro Nino1(1.Akita University, 2.Akita Industrial Technology Center)
177 results ( 1 - 50 )
- 1