Spring Meeting of the Japan Society of Powder and Powder Metallurgy, 2022
May 24 - May 26, 2022Online
You can search for presentations in this event.
Search
Spring Meeting of the Japan Society of Powder and Powder Metallurgy, 2022
May 24 - May 26, 2022Online
You can search for presentations in this event.
SearchSearch Results(198)
[1-1]Memorial Lecture of JSPM Award:
Development of a generation system of linear drive type modulated rotating magnetic fields
〇Shigeru Horii1(1.Kyoto Univ. Adv. Sci.)
[1-2]Invited Talk: Fabrication of TaN and YSZ sintered pellets by spark plasma sintering method under high pressure
〇Masashi Miyakawa1, Fumio Kawamura1, Kiyoshi Kobayashi1, Takashi Taniguchi1, Hitoshi Yusa1(1.National Institute for Materials Science)
[zoom2]Click here for Zoom
[1-3A]Fabrication of high-strength multilayered alumina with crystalline orientation by EPD in a magnetic field
Atsushi Nagase2, 〇Tohru S. Suzuki1, Tetsuo Uchikoshi1, Hajime Kiyono2(1.National Institute for Materials Science, 2.Shibaura Institute of Technology)
[1-4A]Fragmentation and Solidification Process of Molten Metal by Fast Water Spray
Wataru HIKITA1, 〇Chihiro INOUE1, Makoto NAKASEKO2(1.Kyushu University, 2.JFE Steel)
[1-5A]Development of spherical iron powder by High-pressure water atomization process
〇Takuya TAKASHITA1, Makoto Nakaseko1(1.JFE Steel Corporation)
[1-6A]β-MoO3 whisker growth and its application to medical radioactive isotope preparation
〇Hisayuki Suematsu1, Ngo Minh Chu1, Thi Mai Dung Do1, Tadachika Nakayama1(1.Nagaoka University of Technology)
[zoom3]Click here for Zoom
[1-7]Special Invited Talk: Improvements in flash sintering for practical application
〇Takahisa Yamamoto1(1.Nagoya University)
[1-8A]Electrode overvoltage model for blackening phenomena of YSZ
〇Kiyoshi Kobayashi1, Takahisa Yamamoto2, Koji Morita1, Thoru S Suzuki1(1.National Institute for Materials Science, 2.Nagoya University)
[zoom4]Click here for Zoom
[1-9]Invited Talk: Quantum Electronic Strengthening of Materials and its Mechanism from First-Principles
〇Takahiro Shimada1, Hiroki Noda1, Ryoga Fujita1, Hiroyuki Hirakata1(1.Kyoto University)
[1-10]Invited Talk: Flash-induced anomalous mechanical response in ceramics
〇Hiroshi MASUDA1(1.The University of Tokyo)
[1-11A]Acceleration of high-temperature plastic flow in tetragonal zirconia polycrystal using a strong electric field: towards elucidation and application of the phenomenon
〇Hidehiro Yoshida1, Hiroki Motomura1, Daiki Tamao1, Kohta Nambu2, Hiroshi Masuda Masuda1(1.School of Engineering, The University of Tokyo, 2.Kyushu University)
[zoom5]Click here for Zoom
[1-12A]Sintering of hydroxyapatite under electric fields: field-assisted sintering followed by flash event
〇Lieyang Li1, Hiroshi Masuda1, Hidenobu Murata2, Atsushi Nakahira2, Hidehiro Yoshida1(1.The University of Tokyo, 2.Osaka Prefecture University)
[1-13A]Scaling-up of green compacts for rapid SCF sintering
〇Yudai Yamashita1, Yuki Ishino1, Ayu Kodaira1, Tomoharu Tokunaga1, Takahisa Yamamoto1(1.Nagoya University)
[zoom6]Click here for Zoom
[1-14A]Behavior of Vickers crack flash healing in zirconia ceramics
〇Shunsuke KAYUKAWA1, Ayu KODAIRA1, Yutaro KATSUYAMA1, Tomoharu TOKUNAGA1, Koji MORITA2, Kiyoshi KOBAYASHI2, Hidehiro YOSHIDA3, Takahisa YAMAMOTO1(1.Nagoya University , 2.NIMS, 3.The University of Tokyo)
[1-15A]Crack-healing in zirconia (8YSZ) by flash event under AC electric field
〇Shintaro KAWABATA1, Koji MORITA1(1.National Institute for Materials Science)
[1-16A]Effect of Initial grain size on flash-healing in 8Y-ZrO2
〇Shoma Takahashi1, Fuki Naito1,2, Kohta Nambu2,3, Koji Morita1,2,3, Daisuke Terada1(1.Chiba Institute of Technology, 2.National institute for material science, 3.Kyushu University)
[zoom7]Click here for Zoom
[2-1]Invited Talk: Development of Fe-Cr-Si Soft Magnetic Alloys by MIM Process
〇Masahiro Kimura1, Toru Shimizu2, Hisaki Watari2(1.NIPPON PISTON RING CO.,LTD., 2.TOKYO DENKI UNIVERSITY)
[2-2A]Development of Ti-6Al-4V/10wt%TiC material by MIM
〇Hideki Nakayama1, Syouhei Okatani1, Eiji Endo1, Kanae Maki1(1.CASTEM Co., Ltd.)
[2-3A]Fabrication and evaluation of biocompatible oxide ceramic parts by powder injection molding
〇Toshiko Osada1, Satoshi Kobayashi1, Yumi Nagai1(1.Tokyo Metropolitan University)
[2-4A]Surface Modification of Metal Injection Molded SUS430 by Solution Nitriding
〇Akira KUJIHASHI1, Yasuhiro IWASA1, Shigetaka MATSUDA1, Kazuki HANAMI1, Shuntaro TERAUCHI1(1.Osaka Yakin Kogyo Co., Ltd)
[zoom8]Click here for Zoom
[2-5]Memorial Lecture of JSPM Award:
Development and practical application of micro metal injection molding (μ-MIM) technology
〇Shigeo Tanaka1(1.Taisei Kogyo Co.,Ltd.)
[2-6A]Improvement of metal powder injection molding process using cellulose nanofibers
〇Toshiko Osada1, Satoshi Kobayashi1(1.Tokyo Metropolitan University)
[2-7A]Debinding and sintering behavior of MIM and binder jet parts
〇Toshiko Osada1, Satoshi Kobayashi1(1.Tokyo Metropolitan University)
[zoom9]Click here for Zoom
[2-8]Invited Talk: Application of FEM Simulation in Capsule Design of PM-HIP Method
〇Yuto Nagamachi1(1.Metal Technology Co. Ltd.)
[2-9]Memorial Lecture of JSPM Award:
A recent trend of the Net Shape HIP technology
〇Rei MIHARA1(1.IHI Corporation)
[zoom10]Click here for Zoom
[2-10A]History of Kobelco HIP's Challenges and introduction of the latest HIP application cases and development equipment.
Katsumi Watanabe1, 〇Akinori Maegawa1(1.KOBE STEEL,LTD.)
[2-11]Special Invited Talk: Productivity and quality improvements in powder-based manufacturing of metal and ceramic components using high pressure heat treatment
〇Anders MAGNUSSON1, Itaru MASUOKA1, James SHIPLEY1(1.Quintus Technologies, Part of Kobe Steel)
[zoom11]Click here for Zoom
[2-12A]Mechanical and electrical properties of binderless AlN-WC composite ceramics
〇Takashi SEKINE1, Yasushi SUGAWARA1, Shigeaki SUGIYAMA1, Akihiro NINO2(1.Akita Industrial Technology Center, 2.Graduate School of Engineering Science Akita University)
[2-13A]Influence of Plating Thickness and Heat Treatment on the Mechanical Properties of WC-Ni Hard Coating
〇Motofumi OHKI1, Hiroki OBA2, Masayuki NAKAGAWA3, Yasuyoshi SAITOH4, Hiroshi SAITOH1(1.Faculty of Engineering, Niigata University, 2.Graduate School of Science and Technology, Niigata University, 3.Industrial Research Institute of Niigata Prefecture, 4.Tokyo Metropolitan Industrial Technology Research Institute)
[2-14A]Effect of Cr3C2 Addition on Microstructures and Mechanical Properties of WC-Ti(C,N)-Cr3C2-Ni Ultrafine Grained Cemented Carbide
〇Tomohiro Tsutsumi1, Masayuki Takada1, Hideaki Matsubara2, Sota Terasaka2(1.Nippon Tokushu Goukin Co., Ltd., 2.Tohoku University)
[2-15A]Preproduction of TiC based cermet used Fe-Ni alloy binder showing a stress induced martensitic transformation
〇Hiroyuki NAKAYAMA1, Kimihiro OZAKI1(1.National Institute of Advanced Industrial Science and Technology)
[zoom12]Click here for Zoom
[2-16A]Mechanical Properties of Ceramic Composites with Dispersed Negative Expansion Materials
〇Takaya Ueno1, Shinya Kondo1, Takashi Teranishi1, Akira Kishimoto(1.Okayama University)
[2-17A]Preparation of Cemented Carbide using High Entropy Alloy as Binder
〇Akitoshi Tokumasu1, Ori shinya1, Hiroki Hara1(1.TUNGALOY CORPORATION)
[2-18A]Synthsis and mechanical properites of high-entropy hard carbides including W, Mo, Ta and Nb
〇Akihiro Nino1, Ryohei Hamada1, Takashi Sekine2, Shigeaki Sugiyama 2(1.Akita University, 2.Akita Industrial Technology Center)
[zoom13]Click here for Zoom
[3-1]Memorial Lecture of JSPM Award:
Magnetic materials and devices for biomedical applications using magnetic nanopartiles and their asseblies
〇Yoshitaka Kitamoto1(1.Tokyo Institute of Technology)
[3-2A]High functional manifestation in magneto-optical surface plasmon systems: Prospects for bio-chemical sensors
〇Yukiko Yasukawa1, Masaki Itoh1, Haruki Yamane2(1.Chiba Institute of Technology, 2.Akita Industrial Technology Center)
[3-3A]Synthesis of BiFeO3/NiFe2O4 nano-composite particles and their magnetoelectric effects
Kazuki NAKAI1, Masakuni TAKAHASHI1, Jun KANO1, 〇Tatsuo FUJII1(1.Okayama University)
198 results ( 1 - 50 )
- 1