[1-1A]Tensile Strength of WC-Ti(C,N)-Cr3C2-Co Ultrafine-Grained Cemented Carbides
*Tomohiro Tsutsumi1,2, Hideaki Matsubara2, Masayuki Takada1, Sota Terasaka 2, Noriaki Watanabe2(1. Nippon Tokushu Goukin Co., Ltd., 2. Tohoku University)
Spring Meeting of the Japan Society of Powder and Powder Metallurgy, 2023
Jun 6 - Jun 8, 2023早稲田大学 国際会議場
You can search for presentations in this event.
Search
Spring Meeting of the Japan Society of Powder and Powder Metallurgy, 2023
Jun 6 - Jun 8, 2023早稲田大学 国際会議場
You can search for presentations in this event.
SearchSearch Results(139)
[1-2A]Simulation of powder compaction by Discrete Element Method
*Sota TERASAKA1,2, Hideaki MATSUBARA1,2, Tomohiro TSUTSUMI1,3, Toshimaro UEDA1, Noriaki WATANABE1(1. Tohoku University, 2. Japan Fine Ceramics Center, 3. Nippon Tokushu Goukin)
[1-3A]Mechanical Properties of Cemented Carbide Using High Entropy Alloy as Binder at High Temperature
*Akitoshi Tokumasu1, Shinya Ori1, Hiroki Hara1(1. Tungaloy Corporation)
[1-4A]Fabrication and charactarization of Ti(C, N)-25 mass% (Fe-Ni) cermets using Fe-Ni alloy exhibiting stress induced transformation
*Hiroyuki NAKAYAMA1, Kimihiro OZAKI1(1. National Institute of Advanced Industrial Science and Technology)
[1-5A]Influence of Heat Treatment Process on the Microstructure and Mechanical Properties of WC-Ni Hard Coating
*Motofumi OHKI1, Kotaro MUROTANI2, Masayuki NAKAGAWA3, Yasuyoshi SAITOH4, Hiroshi SAITOH1(1. Faculty of Engineering, Niigata University, 2. Graduate School of Science and Technology, Niigata University, 3. Industrial Research Institute of Niigata Prefecture, 4. Tokyo Metropolitan Industrial Technology Research Institute)
[1-6A]Metal AM of hard materials: material properties of EBM-processed high-speed steels and cemented carbides
*Pär ARUMSKOG1, Ulrik BESTE1(1. VBN Components AB)
[1-7A]Preparation and mechanical properties of (Ti, Ta, Nb, W)(C, N) ceramics
*Akihiro Nino1, Hibiki Yoshii1, Takashi Sekine2, Shigeaki Sugiyama2(1. Akita University, 2. Akita Industrial Technology Center)
[1-8A]The effect of SiO2 additives on sintering Ca-α-SiAlON powder prepared by combustion synthesis
*Takamasa Iizuka1, Masahiro Yokouchi1(1. Kanagawa Institute of Industrial Science and Technology)
[1-9A]Effect of Nb on Properties of HIPed Ni-Cr-Mo Gas Atomized Powder with Al and Nb Addition
*Tomoki Hirono1, Toshiyuki Sawada1(1. SANYO SPECIAL STEEL Co.,Ltd.)
[S-0]Opening Address of Chairman of 2022 JPMA Awards
*Mitsuhiro GOTO1(1. Sumitomo Electric Industries, Ltd.)
[S-1]Development Prize・New Design
Net shape manufacturing of complex multi-stage shaped parking parts
with two-pcs simultaneous compacting.
*Kohei OTOMO1(1. Sumitomo Electric Industries, Ltd.)
[S-2]Development Prize・New Design
Mass production of high accuracy and thin-wall product for electric VVT
*Tomoya SAKO1(1. FINE SINTER CO., LTD.)
[S-3]Development Prize・New Design
Planetary Brazed Carriers for MT with Improved Endurance
Fatigue Strength
*Yusuke HORI1(1. Sumitomo Electric Industries, Ltd.)
[S-4]Development Prize・New Design
Eco-friendly parking parts with laser hardening
*Yoshiki HONDA1(1. Sumitomo Electric Industries, Ltd.)
[S-5]Development Prize・New Design
Development of housing sprockets for electric VVT that achieves
both high hardness and high accuracy
*Shota NAKAMURA1(1. Sumitomo Electric Industries, Ltd.)
[S-6]New Powders Prize
High Thermal Conductivity Metal Powders for Additive Manufacturing
*Koichiro INOUE1(1. Daido Steel Co., Ltd.)
[S-7]Effort Prize
Sintered bearing for Electric Parking Brake motor
*Koudai SUEKI1(1. Porite Corporation)
[2-1]Invited Talk: 3YSZ fabricated by ultra-fast high-temperature sintering technique
*Bin Feng1, Ryuhei Murakami1, Koji Matsui1, Naoya Shibata1,2, Yuichi Ikuhara1,2(1. The University of Tokyo, 2. Japan Fine Ceramics Center)
[2-2A]Defect charge states in flash-sintered Y2O3
*Hiroshi Masuda1, Ayano Nakamoto1, Kohta Nambu2,3, Hidehiro Yoshida1,4(1. The University of Tokyo, 2. Kyushu University, 3. National Institute for Materials Science, 4. Next Generation Zirconia Social Cooperation Program, The University of Tokyo)
[2-3A]Effect of electric fields on nanoindentation properties of ZnS
*Haruto Kuwabara1, Hiroshi Masuda1, Hidehiro Yoshida1,2(1. H. Yoshida Laboratory, Dept. Materials Science, School of Engineering, The University of Tokyo, 2. Next Generation Zirconia Social Cooperation Program）（※This presenter is a candidate for the Student Award for Outstanding Presentation.)
[2-4]Invited Talk: Development of a neural network-based method to simulate ion behaviors under electric fields: application to ion migration in amorphous Li3PO4
*Koji Shimizu1, Ryuji Otsuka1, Satoshi Watanabe1(1. The University of Tokyo)
[2-5A]Effect of eletric field applied during flash sintering with strontium titanate
*mikito seko1, takahisa YAMAMOTO1(1. nagoya umiversity）（※This presenter is a candidate for the Student Award for Outstanding Presentation.)
[2-6A]Optical property of c-axis oriented lanthanum silicate fabricated by magnetic alignment
*Tohru S. Suzuki1, Akihiro Kawamura2,1, Kiyoshi Kobayashi1, Hajime Kiyono2(1. National Institute for Materials Science, 2. Shibaura Institute of Technology)
[2-7A]Diffusion behavior of cubic zirconia polycrystals under a strong electric field
*Kohta Nambu1,2, Naoya Orimoto3, Kohei Soga3, Hidehiro Yoshida4,5, Koji Morita1,2(1. Kyushu University, 2. NaNational Institute for Material Science, 3. Tokyo University of Science, 4. The University of Tokyo, 5. Next generation Zirconia Social Cooperation Program）（※This presenter is a candidate for the Student Award for Outstanding Presentation.)
[2-8]Invited Talk: Sintering of Ga2O3 compact and control of photoluminescence property using FLASH sintering
*Tomoharu Tokunaga1, Ayu Kodaira1, Ryonosuke Ono1, Hidehiro Yoshida2, Takahisa Yamamoto1(1. Nagoya University, 2. The University of Tokyo)
[2-9A]High temperature tensile ductility of 3Y-TZP ceramics under an AC electric field
*Itsuki Imanishi1, Hiroshi Masuda1, Hidehiro Yoshida1,2(1. The University of Tokyo, 2. Next generation Zirconia Social Cooperation Program, The University of Tokyo）（※This presenter is a candidate for the Student Award for Outstanding Presentation.)
[2-10A]Grain growth behavior of 8 mol% yttria-stabilized zirconia under strong electric field
*Koji Morita1,2,3, Akio Ishii2, Kohta Nambu3, Hidehiro Yoshida4, Kohei Soga2(1. National Institute for Materials Science (NIMS), 2. Tokyo University of Science, 3. Kyushu University, 4. The University of Tokyo)
[2-11]Special Invited Talk: Structures and electronic states of new sulfide-based glasses
*Kohei KADONO1(1. Kyoto Institute of Technology)
[2-12A]Blue color of Mn-doped alkaline earth aluminate glasses
*Haruna Sasaki1, Atsunobu Masuno1,2(1. Hirosaki University, 2. Kyoto University）（※This presenter is a candidate for the Student Award for Outstanding Presentation.)
[2-13A]Photoluminescence properties of Eu-doped Sr-Si-Al-O-N glass powders
Shun LIU1,2, *Hiroyo SEGAWA1,2, Kohsei TAKAHASHI1, Kenzo DEGUCHI1, Shinobu OHKI1, Takashi TAKEDA1, Tetsuo KISHI2, Tetsuji YANO2, Naoki OHASHI1(1. National Insitute for Materials Science, 2. Tokyo Institute of Technology)
[2-14A]Enhancement of Faraday effect in ZnFe2O4 thin film deposited on plasmonic array
*Seisuke Nakashima1, Rino Mizutani1, Fumiya Ohata1, Teppei Furudate1, Shunsuke Murai2(1. Shizuoka University, 2. Kyoto University)
[2-15A]Fabrication of silver nanoantenna stickers and its optical properties
*TienYang Lo1, Shunsuke Murai1, Katsuhisa Tanaka1(1. Kyoto University）（※This presenter is a candidate for the Student Award for Outstanding Presentation.)
[2-16A]Composites of naturally derived DNA and gold nanoparticles crosslinked by platinum complexes and their optical properties
*Ibuki Yasui1, Hayaki Shimizu2, Arisa Fukatsu1, Misa Tomoda3, Mio Kondo3, Shigeyuki Masaoka3, Kenji Okada1, Masahide Takahashi1(1. Osaka Metropolitan University, 2. Osaka Prefecture University, 3. Osaka University）（※This presenter is a candidate for the Student Award for Outstanding Presentation.)
[2-17A]Control of Particle Arrangement in Structurally Colored Spherical Colloidal Clusters and Improvement of Their Robustness
*Takahiro YAMANAKA1, Naoki TARUTANI1, Kiyofumi KATAGIRI1, Kei INUMARU1, Yukikazu TAKEOKA2(1. Hiroshima University, 2. Nagoya University）（※This presenter is a candidate for the Student Award for Outstanding Presentation.)
[2-18A]Cu-paddlewheel type Metal-organic framework (MOF) oriented-thin film with high optical transparency by crystal-morphological control
*Yuka Koseki1, Kenji Okada1,2, Arisa Fukatsu1, Masahide Takahashi1(1. Osaka Metropolitan University, 2. JST-PRESTO）（※This presenter is a candidate for the Student Award for Outstanding Presentation.)
[2-19A]Evaluation of electric properties of α-Ga2O3 by terahertz time domain spectroscopy
*Takeru Wakamatsu1, Hitoshi Takane1, Kentaro Kaneko2, Itsuhiro Kakeya1, Takashi Shinohe3, Katsuhisa Tanaka1(1. Kyoto University, 2. Ritsumeikan University, 3. FLOSFIA Inc.）（※This presenter is a candidate for the Student Award for Outstanding Presentation.)
[3-1]Invited Talk: Evolving Materials Science of Nanosheets
*Takaaki Taniguchi1(1. National Institute for Materials Science)
[3-2A]Liquid-liquid phase separation of graphene oxide nanosheet dispersions induced by complexation with Pluronic block polymers
Jin Zhang1, Taisei Nishimi1,2, *Yoshiyuki Sugahara1(1. Waseda University, 2. Japan Technological Research Association of Artificial Photosynthetic Chemical Process (ARPChem))
[3-3A]Reduced Graphene Oxide–Ordered Mesoporous Carbon Nano-hybrids for the Application to Electrode of Supercapacitor
*Kosuke Manabe1, Hirokatsu Miyata2, Jie Wang3, Yusuke Yamauchi2,3, Yoshiyuki Sugahara1(1. Waseda University, 2. Nagoya University, 3. The University of Queensland）（※This presenter is a candidate for the Student Award for Outstanding Presentation.)
[3-4]Special Invited Talk: Fabrication of inorganic nanosheets and their freestanding films and creation of their functions
*Shintaro Ida1(1. Kumamoto University)
[3-5]Special Invited Talk: Fabrication of ceramic materials through building up block particles
*Takamasa Ishigaki1(1. Hosei University)
[3-6]Invited Talk: Synthesis of Porous Ceramic Polyhedral Particles via Pyrolysis-induced Phase Separation
*George Hasegawa1(1. Nagoya University)
[3-7]Invited Talk: Synthesis and applications of zeolite separation membranes
*Motomu Sakai1, Masahiko Matsukata1(1. Waseda University)
[3-8]Invited Talk: Hydrothermal synthesis of seaweed-like sodium titanate and its Sr2+ sorption property
*Tomoyo GOTO1, Yoshifumi KONDO1, Tohru SEKINO1(1. Osaka University)
[3-9A]Fabrication of multiscale Al2O3-ZrO2 composites with controlled microstructure
*Kaito Teraguchi1, Atsushi Yokoi2, Go Kawamura1, Atsunori Matsuda1, Tan Wai Kian1, Hiroyuki Muto1(1. Toyohashi University of Technology, 2. National Institute Technology.Numazu College）（※This presenter is a candidate for the Student Award for Outstanding Presentation.)
[3-10A]Synthesis of III-V compound semiconductor nanocrystals with coherent core-shell structure and their application to photodiodes
Kazuhiro Nemoto1, *Naoto Shirahata1(1. National Institute for Materials Science)
[3-11A]Synthesis of Structurally Controlled Pt Nanoparticles via Microwave-Assisted Polyol Reaction and Development of Highly-Efficient Catalyst towards VOC Elimination
*Yunzi Xin1, Taku Nagata1, Kunihiko Kato1, Takashi Shirai1(1. Nagoya Institute of Technology)
[1-10A]Evaluation of gas-atomized powders by synchrotron X-ray and observation of internal pore
*Noriharu Yodoshi1, Takaya Ogihara1, Kentaro Kudo1, Kazunari Shinagawa1, Ikuya Sakurai2, Mitsutaka Sato3, Naoya Masahashi3, Minoru Yoshikawa4, Keisuke Ito4(1. Kyushu University, 2. Nagoya University, 3. Tohoku University, 4. Industrial Technology Institute Miyagi)
[1-11A]Fundamental examination to estimate friction between powder and tool surface in powder compaction
*Yukinori TANIGUCHI1(1. National Institute of Technology(KOSEN), NARA College)
[1-12A]Density improvement of pressed compacts of (Bi0.5Na0.5)TiO3 powder prepared by hydrothermal synthesis.
*Leo OKUMURA1, Koki MATSUNAGA1,2, Muneyasu SUZUKI2, Yuka TAKAGI1, Masanori HAYASE1, Hajime NAGATA1(1. Tokyo University of Science, 2. AIST）（※This presenter is a candidate for the Student Award for Outstanding Presentation.)
139 results ( 1 - 50 )
- 1