[A-101]Development of mold release films for plastic die and molds
*kazunori Suzuki1(1. Iwate Industrial Research Institute)
プラスチック成形加工学会 第34回年次大会
Jun 21 - Jun 22, 2023タワーホール船堀
You can search for presentations in this event.
Search
プラスチック成形加工学会 第34回年次大会
Jun 21 - Jun 22, 2023タワーホール船堀
You can search for presentations in this event.
SearchSearch Results(215)
[A-103]Research on correlation between molding conditions (including resin type) and de-molding force
*Tetsuya Ofusa1, Fuminobu Kimura1, Yusuke Kajihara1(1. The University of Tokyo)
[A-104]Investigation of the Effect of Coatings on the Mold Release Resistance of Injection Mold Surfaces
*Leo SOMEYA1, Fumiya KAWANISHI1, Yasuhiko MURATA1, Ken OGIWARA2(1. Nippon Institute of Technology, 2. Nippon ITF Inc.)
[A-105]Influence of Counter Pressure Mold on surface properties in Injection foamed molding
*Shota Tanaka1, Masakatsu Taga2, Masahiro Seto1, Atsushi Mizutani2, Masashi Yamabe1(1. Kanazawa Institute of Technology, 2. Nissan Motor Corporation)
[A-106]Improving of Strength around Flow Front Meeting Area in Molded Products by Core Pin Driving Method inside Injection Mold
*tomohiro hishida1, atsushi motegi1, yasuhiko murata2(1. PLAMO Co., Ltd, 2. Nippon Institute of Technology)
[A-107]Visualization analysis of filling behavior in cavities for thick-walled molding Ⅲ
*Hideaki Kato1, Hidetoshi Yokoi2(1. Institute of Industrial Science, The University of Tokyo, 2. YOKOI Labo)
[A-108]Correlation Analysis between Compensation Flow and Dimensional Accuracy in Thick-wall Molded Products (Part II)
*Yuki Nishiyama1, Michihiro Tatsuno2, Hidetoshi Yokoi3(1. SEKISUI CHEMICAL Co., Ltd., 2. TOKYO Univ., 3. YOKOI Labo)
[B-101]Stretching technology and high-order structure analysis of microbial polyester
*Taizo Kabe1, Tadahisa Iwata1(1. Univ. Tokyo)
[B-102]Control of the crystalline and amorphous structure in biaxially oriented polypropylene film
*Satoshi Fujiwara1, Toshiumi Tatsuki1, Kazuma Okada1, Masatoshi Ohkura1, Hideaki Takahashi2, Yoshitomo Furushima2(1. Toray Industries, Inc., 2. Toray Research Center, Inc.)
[B-103]Brittle-ductile transition of amorphous polymer films by hot-stretching
*Shogo Nobukawa1, Yoshito Kitagawa1, Katsuhiro Inomata1(1. NITech)
[B-104]Development of Self-Reinforcement Plastic by Lamination Molding of Ultra-High Molecular Weight Polyethylene Drawn Film
*Kazuhiro Omori1, Hironari Kirihara1, Akane Mashiko1(1. Industrial Technology Center of Tochigi Prefecture)
[B-105]Polyethylene hollow fiber membrane production technology by melt spinning and drawing porous
*Akihiro Kojima1(1. Mitsubishi Chemical Corporation Membrane Technology Group Aqua Solutions Laboratory R&D Transformation Division)
[B-106]Correlated Changes of Monoclinic Form and Intermediate Phase for Drawn Film of Ultra-High Molecular Weight Polyethylene
Sayoko Ogura1, Masaki Kakiage1, *Hiroki Uehara1, Takeshi Yamanobe1(1. Gunma Univ.)
[B-107]LIMEX: Newly Developed Paper Alternative Material
*Shigeki Kuroki1(1. TBM Co., Ltd.)
[B-108]Time-resolved X-ray scattering analysis reveals the stretch-induced structural change of silks
*Taiyo Yoshioka1, Tsunenori Kameda1(1. NARO)
[C-101]Prospect of the Effective Use of Supercritical Fluids in Polymer Processing
*Shin-ichi Kihara1, Ikuo Ushiki1, Shigeki Takishima1(1. Hiroshima Univ.)
[C-103]Twenty Years of Changes in Physical Foam Injection Molding System
*Masanori Morita1(1. THE JAPAN STEEL WORKS, LTD. )
[C-105]In-line measurement method of concentration of N2 for foam injection molding process
*Itsuki Yoshikawa1, Yuta Hikima1, Masahiro Ohshima1(1. Kyoto Univ.)
[C-106]Separation of aluminum alloy/glass-fiber reinforced polycarbonate bonding interface by CO2 impregnation and heating-induced interface foaming
*Yuto Mori1, Rajesh Kumar Sharma1, Kenaro Taki1(1. Kanazawa Univ.)
[C-107]Separation of the glass/epoxy interface by CO2 impregnation and heating-induced interface foaming
Soichiro Kishimoto1, Rajesh Kumar Sharma1, *Kenaro Taki1(1. Kanazawa Univ.)
[C-108]Analysis of the effect of crystallization of molten polypropylene under rapid cooling on physical foaming behavior by time-resolved SAXS and X-ray CT using synchrotron radiation facilities
Kenta Ushida1, Hideo Akimoto3, Hisahiro Tanaka2, Masato Goto2, *Kenaro Taki1(1. Kanazawa Univ., 2. Caeilo Japan, 3. Akimoto Certified Engineer Office)
[D-101]Molding History Dependence of Mechanical Properties of Recycled Amorphous Plastic Materials: The Case of ABS
*Shigeru Yao1, Kota Nakayama1, Patchiya Phantong1, Nobuhisa Takayama1(1. Fukuoka Univ.)
[D-102]Study on mechanical property and photodegradation behavior of shear-applied HDPE
*Katsuhisa Tokumitsu Tokumi1, Ryo Sugawa1, Hiroki Takeshita1(1. Univ. Shiga Prefecture)
[D-103]Effect of various molding conditions on the physical properties and chemical structure of semi-aromatic polyamides
*Kiichi Goto1, Shohei Takahashi1, Kyoko Kazuma1, Hiroshi Ito2,3(1. Yamagata Reserch Institute of Technology, 2. Research Center for Green Materials and Advanced Processing, 3. Graduate School of Organic Materials Science, Yamagata University)
[D-104]Viscosity homogenization treatment by means of tandem extruder
*Takeharu Isaki1, Hiroki Endo2, Takeru Yamamoto2, Yasunori Sato2, Tsutomu Takahashi2(1. Mitsui chemicals, Inc. , 2. Nagaoka University of Technology)
[D-105]Achieving "visualization" through material recycling ~ Efforts for local plastic circulation in the Minami-Chikugo region of Fukuoka Prefecture ~
*Shinya Suzuki1(1. Fukuoka University)
[D-107]Effect of Poly(vinyl butyral) Addition on Mechanical Properties of Glass Fiber Reinforced Polypropylene
*Yuuki Yuasa1, Tetsuo Takayama1(1. Yamagata Univ.)
[D-108]Effect of processing histry on melt-spinning behavior of polypropylene
*Wataru Takarada1, Mohammad A. Barique1, Kazuma Kunimitsu1, Takeshi Kikutani1(1. Tokyo Tech)
[E-102]Effect of preform in press forming of the composite material with peanut husks
*Keisuke Kanou1, Toshio Kotani2, Susumu Takahashi1, kosuke suzuki1(1. Nihon Univ., 2. MURO CORPORATION)
[E-103]Relationship between voids and moisture content in press forming with pellet of polystyrene
*Raimu Hoshino1, Susumu Takahashi1, kosuke suzuki1(1. Nihon Univ.)
[E-104]Classification method for quality of injection blow molding based on thermography and an AI engine
*Yusuke Uchiyama1, Ayumu Nono1, Tasuku Kikkawa2, Susumu Washizuka2, Toshiyuki Hori3, Hiroshi Nishino3(1. MAZIN Inc., 2. Kobayashi Pharmaceutical Co., Ltd, 3. Kobayashi Pharmaceutical Plax Co.,Ltd. )
[E-105]Prediction method and validation for mechanical properties of injection-molded products using short-fiber reinforced plastics
*Senji Hamanaka1, Chisato Nonomura1, Atsushi Yokoyama2(1. TOYOBO CO., LTD., 2. Kyoto Institute of Technology)
[E-106]3D Multi-Layer Flow Numerical Analysis for Uniforming Thickness in a Co-Extrusion Multilayer Film Casting Die
*fumiyuki yoshida1, koji yamada1, shinji oota1, tsuguki nishihara2, masafumi horiuchi3, isao yonekura1(1. TOPPAN INC. Technical Research Institute, 2. TOPPAN INC.Technical Research Institute, 3. TOPPAN INC.)
[E-107]Practical Modeling and Characterization of Non-isothermal Crystallization Behavior for Semi-crystalline Polymers
Masaki Yoshii1, *Motonori Nakai1, Masato Goto1, Hisahiro Tanaka1(1. SAEILO JAPAN, INC.)
[E-108]Creation and Application of Material Failure Model with Digimat
*Zhilan XU1, Takato Nakayama1, Hiroshi Watanabe1(1. MSC Software)
[F-101]Effect of Injection Molding Conditions on Mechanical Properties of Joint Interface in c-FRTP Pultrusion/Injection Hybrid Molding
*TAKUMI Okahashi1, AKIO Ohtani1, MASAKI Ohishi2(1. KYOTO institute of technology, 2. SATOH GROUP)
[F-102]Effect of Fiber Surface Treatment using Nitric Acid on Mechanical and Tribological Properties of CF/PPS Composites
*Yusaku Kawaai1, Yosuke Nishitani2(1. Graduate School of Engineering, Kogakuin University, 2. Kogakuin University)
[F-103]Relationship between morphology of base resin and interfacial property in c-FRTP
*Shota TAKIMOTO Takimoto1, Akio Ohtani1(1. Kyoto institute of Technology)
[F-104]Research on continuous molding of CFRTP pipes
*Kohei Taniguchi1, Asami Nakai1, Masaki Ohishi2(1. Gifu Univ., 2. Satoh Machinery Works Co. Ltd.)
[F-105]Fabrication of transparent glass fiber composites using miscible polymer blends
*Yoshimi Muraoka1, Takayuki Hirai, Hirotaka Okamoto(1. TOYOTA CENTRAL R&D LABS., INC.)
[F-106]High speed pultrusion of continuous fiber reinforced thermoplastic
*Masaki Ohishi1, Asami Nakai2(1. Satoh machinery works Co., Ltd., 2. Gifu Univ.)
[F-107]Study on bonding of dissimilar materials by anchoring at bonding interfaces using fiber clothes
*Akira Matsuba1, Masahiro Seto1, Masashi Yamabe1(1. Kanazawa Institute of Technology)
[F-108]Effect of electrostatic interaction on the interfacial adhesion between polyvinyl chloride and reinforcing fibers
*Shunya Yorikane1, Ayaka Yamaguchi1, Hideyuki Uematsu1, Shuichi Tanoue1(1. Fukui Univ.)
[G-102]New Textile made from Air
*toshikazu umemura1, akio ohtani2, ryo marui3, hayato tamoi4, toshikazu umemura1(1. Plaisir Co.,Ltd., 2. Kyoto Institute of Technology, 3. Marui Textile Machinery Co., Ltd., 4. Tayuh Textile Industry Corp.)
[G-103]Development of Positional Deviation between Left and Right Links Correction Control System for Simultaneous Biaxial Stretching Equipment
*Tomohiro Hirakawa1, Takashi Ochiiwa1, Hideki Tomiyama1(1. The Japan Steel Works, Ltd.)
[G-104]Development of T-die equipped with motor-controlled automatic adjustment mechanism
*Hirotomo Izaki1, Kazuya Yokomizo1, Ryuichiro Maenishi1, Tomiyama Hideki1(1. THE JAPAN STEEL WORKS, LTD.)
[G-105]Effect of graphene oxide addition on the carbonization of poly(ethylene telephthalate) films
*Sein Shibata1, Wataru Takarada1, Masatoshi Shioya1(1. Tokyo Tech)
[G-106]Crystal Structure Development in Sea/island Poly(L-lactide)/Poly(D-lactide) Bicomponent Fibers During Laser-Heated Melt Electrospinning and Post-Annealing Processes
*Zongzi Hou1, Haruki Kobayashi1, Katsufumi Tanaka1, Wataru Takarada2, Takeshi Kikutani2,1, Midori Takasaki1(1. Kyoto Institute of Technology, 2. Tokyo Institute of Technology)
[G-107]Effect of applied stress on self-hardening phenomenon for uniaxially drawn polypropylene film
*sotaro sakuraba1, masaki kakiage1, hiroki uehara1, takeshi yamanobe1(1. Gunma Univ.)
[G-108]Role of molecular entanglements in melt-drawing of ultrahigh-molecular-weight polyethylene
*Ayaka Takazawa1, Masaki Kakiage1, Takeshi Yamanobe1, Hiroki Uehara1, Shinichi Asai2, Shoko Naruke2, Takuya Ohnishi2, Yasutake Wakabayashi2(1. Gunma Univ., 2. Tosoh Co.)
215 results ( 1 - 50 )
- 1
- ...