講演情報
[3211-22-08]廃プリント基板のチオ硫酸アンモニウム浸出における共存金属への金の析出
○商希 全1、伊藤 真由美1、北島 奈帆1、Pongsumrankul Rong1、田中 信也1、高橋 裕貴1、Tabelin Carlito1、広吉 直樹1 (1. 北海道大学)
司会: 芳賀一寿（秋田大学）
キーワード：
金、チオ硫酸アンモニウム浸出、廃プリント基板、析出
Cyanide leaching is a conventional method to extract gold (Au). Due to the toxicity of cyanide, however, ammonium thiosulfate leaching has been developed as an alternative method to extract Au. This study investigated the factors affecting the extraction of Au in ammonium thiosulfate leaching of waste printed circuit boards (PCBs), and found that the liquid-to-solid ratio is an important factor, that is, extraction of Au decreased when liquid-to-solid ratio increased. Gold extraction was 86% at liquid-to-solid ratio of 100, but Au extraction was under 9% at liquid-to-solid ratio of 20. Calculation based on the experimental results at this liquid-to-solid ratio indicated that, there was enough thiosulfate for Au extraction in the aqueous phase. This means that the low Au extraction is not due to the lack of thiosulfate. SEM-EDX observations of the leaching residues showed that Au was preferentially deposited on the surfaces of Cu and Al particles. This indicate that the extracted Au is re-precipitated on these co-existing metals