[P2-6] Rotating Electrical Machines 2 | IPEC2026

Advanced Search

Session Details

Poster SessionRotating Electrical Machine

[P2-6]Rotating Electrical Machines 2

Wed. Jun 3, 2026 12:40 PM - 2:00 PM JST
Wed. Jun 3, 2026 3:40 AM - 5:00 AM UTC

Poster6(Event & Exhibition Hall)

Chair:Takahiro Sato(Muroran institute of technology)

[P2-6-01]Reluctance Torque Characteristics of PM-assisted Half-Wave Rectified Variable Field Flux Motor

*Taiga Yamaguchi¹, Tong Wang¹, Takashi Abe¹, Yoshitsugu Otomo¹ (1. Nagasaki University (Japan))

[P2-6-02]Rare-Earth-Free Variable Magnetization PM Reluctance Motor

*TAKAHIRO MORIOKA¹, Kazuto Sakai¹, Sari Maekawa¹ (1. Meiji University (Japan))

[P2-6-03]Propagation of Pulsed Voltage With a Rise Time of Shorter Than 100 ns Driven by SiC Pulsar Within Random Wound Motor

*Takafumi Okuda^1,2, Yuki Nomura^1,2, Hirotaku Ishikawa³, Takahiro Umemoto⁴, Yusuke Kikuchi⁵, Takashi Nakamura^1,2 (1. The University of Osaka (Japan), 2. NexFi Technology Inc., (Japan), 3. Mitsubishi Electric Corp. (Japan), 4. The University of Tokyo (Japan), 5. University of Hyogo (Japan))

[P2-6-04]A Design Consideration of the Dual-three Phase Type Multiphase Induction Motor Drive System (IMTS) for Electric Vehicle Tractions

*Kyohei Kiyota¹, Keigo Matsuzaki¹, Akira Chiba¹, Masashi Kobayashi² (1. Institute of Science Tokyo (Japan), 2. Toyota Motor Corporation (Japan))

[P2-6-05]Measurement and Uncertainty Analysis of Asynchronous Machines Using Dual Test Benches and Complementary Software Tools

*Nijan Yogal¹ (1. VEM Motors GmbH (Germany))

[P2-6-06]A Simple Online Method to Estimate the Operating Characteristics of Inverter-Fed Induction Motors

*Hideaki Hirahara¹, Shu Yamamoto¹ (1. The Polytechnic University of Japan (Japan))

[P2-6-07]Evaluation of the Acoustic Noise Influenced by Current Waveform and Current Control Method in the Low-Speed Range of SRMs

*Muhammad Fabio¹, Shou Qiu¹, Kyohei Kiyota¹ (1. Institute of Science Tokyo (Japan))

[P2-6-08]Torque Estimation of Switched Reluctance Motors Using Magnetic Circuit Model

Hiroki Ishikawa¹, *Hirokazu Yoshino¹, Kohei Budo¹ (1. Gifu University (Japan))

[P2-6-09]Analytical Modeling of Back Electromotive Force in Surface Permanent Magnet Vernier Motor

*Yasuhiro Kataoka¹ (1. Akita Prefectural University (Japan))

[P2-6-10]Application of Parameter Topology Simultaneous Optimization to a 42 Pole 36 Slot Outer Rotor Permanent Magnet Synchronous Motor

Wataru Sekiyama¹, *Hidenori Sasaki¹ (1. Hosei University (Japan))

[P2-6-11]Proposal and Validation of a Ringing Loss Analysis Model for PWM Inverter-Driven Motor Systems

*Masakazu Akahane¹, Kazunobu Hayashi¹, Kan Akatsu² (1. HIOKI E.E. CORPORATION (Japan), 2. Yokohama National University (Japan))

[P2-6-12]Insights to Spectral Based Acoustic Emissions Detection of Partial Discharge

*Colin Sim¹, Stephen Pierson¹, Han Hu¹, Alan Mantooth¹ (1. University of Arkansas (USA))

[P2-6-13]Contactless Permanent Magnet Temperature Detection of PMSM based on the Input DC Power of the Auxiliary Inverter

*Ryo Hamba¹, Keisuke Kusaka¹, Yoshihisa Hojo² (1. Nagaoka University of Technology (Japan), 2. Toyo Denki Seizo K.K. (Japan))

[P2-6-14]Estimation of Winding Loss by measureing Temperature Rises at End-winding and Active-winding for High Slot Fill Winding

*Shoichi Oaku¹, Jun Ebinuma¹, Yuto Yamada¹, Hiroya Sugimoto¹ (1. Tokyo Denki University (Japan))

[P2-6-15]Quantification of Manufacturing-Induced Degradation in stator cores of electric machines and the restorative Role of annealing

*Sima Soltanipour¹, Douglas Jutsell Nilsson², Torbj¨orn Thiringer², Joachim Lindstr¨om¹ (1. Volvo Cars Corporation (Sweden), 2. Chalmers University of Technology (Sweden))

[P2-6-16]AC Loss Asymmetry in Fractional-Slot PM Machines with Form-Wound Double-Layer Flat-Wire Windings

*Wenting Wang¹, Linnan Sun¹, Tianjie Zou¹, Gaurang Vakil¹, Zeyuan Xu¹, Zhaokai Li², David Gerada¹, Chris Gerada¹ (1. University of Nottingham (UK), 2. Politecnico di Milano (Italy))

Back to Category List