Session Details

[G]Aluminum and Its Alloys

Thu. Sep 19, 2024 1:00 PM - 3:00 PM JST
Thu. Sep 19, 2024 4:00 AM - 6:00 AM UTC
Room K A205 2nd floor Building A Center for Education in Liberal Arts and Sciences
座長:李 昇原(富山大学)、日野 実(広島工業大学)

※表示の講演時間には質疑応答時間も含みます。
(質疑応答時間5分、基調講演と招待講演は5~10分)

[262]Temperature dependence of the damping property of the β-Al3Mg2 phase

*Daisuke ANDO1, Keisuke Watanabe1, JinXian Hunag1, Yuji Sutou1,2 (1. Tohoku Univ. (Engineering), 2. Tohoku Univ. AIMR)

[263]Flow Stress, microstructure, and heat treatment of Al–5.81Zn–1.65Mg aluminum alloy subjected to heavy-reduction thermomechanical processing

*Hyung-Won PARK1, Yuki SHIMOMURA2, Yun-Soo LEE3, Hyeon-Woo SON3, Souta URAYAMA4, Jun YANAGIMOTO2 (1. Komatsu University, 2. The University of Tokyo, 3. Korea Institute of Materials Science, 4. Komatsu University (Present: KAGA, INC.))

[264]Effect of Adhesive Spot on Tensile Deformation of Pure Aluminum Thin Films

*Koshiro IKEDA1, Naoya TADA2, Takeshi UEMORI2, Junji SAKAMOTO2 (1. Okayama Univ., 2. Okayama Univ.)

[265]Application of Electroless Ni-P Plating to Evaluation of Hydrogen Embrittlement of 7075-T6 Aluminum Alloy

*Makoto HINO1, Ayumu ASADA2, Keitaro HORIKAWA3, Seigo KUROSAKA4, Hiroki OKUBO4 (1. Hiroshima Inst. of Tech., 2. Hiroshima Inst. of Tech.(M1), 3. Osaka Univ., 4. C. Uyemura & Co.)

break

[266]Effect of cooling rate on solidification microstructure in Al-Si-Fe and Al-Si-Mn ternary eutectic alloys

*Shunta KITA1, Naoki Takata1, Asuka Suzuki1, Makoto Kobashi1, Yuichi Furukawa2, Takashi Tomita2 (1. Nagoya Univ., 2. Toyota Motor Co.)

[267]Microstructure analysis of T-phase in Al-Zn-Mg alloy with low Zn/Mg ratio

*Ahmed Abrar1, Seungwon Lee1, Taiki Tsuchiya1, Kenji Matsuda1, Katsuhiko Nishimura1, Norio Nunomura1, Hiroyoki Toda2, Kyosuke Hirayama3, Kazuyuki Shimizu4, Masatake Yamaguchi5, Tomohito Tsuru5, Mitsuhiro Itakura5 (1. University of Toyama, 2. Kyushu University, 3. Kyoto University, 4. Tottori Unversity, 5. Japan Atomic Energy Agency)

[268]Microstructure observation of thermomechanical processed Al-1.5Cu-0.5Mg(mol%) alloy

*Kenta Koshiishi1, Hai Vu Ngoc1, Seungwon Lee1, Taiki Tsuchiya1, Susumu Ikeno2, Kenji Matsuda1 (1. University of Toyama, 2. Professor of emeritus University of Toyama)