[17A-Plenary-01]Sustainability as enabler for Powder Metallurgy: New SMC materials for electrification
*Hilmar Vidarsson1, Nils Borneman1(1. Hoganas AB (Sweden))
International Conference on Powder and Powder Metallurgy, 2023, Kyoto (JSPMIC2023)
Oct 16 - Oct 18, 2023Doshisha University, Kambaikan, Kyoto, Japan
You can search for presentations in this event.
Search
International Conference on Powder and Powder Metallurgy, 2023, Kyoto (JSPMIC2023)
Oct 16 - Oct 18, 2023Doshisha University, Kambaikan, Kyoto, Japan
You can search for presentations in this event.
SearchSearch Results(134)
[17A-Plenary-02]An outlook on the cemented carbide industry, focusing on trends, sustainability, and research.
*Susanne Norgren1(1. Sandvik (Sweden))
[17A-B1-01][INVITED] Status and Development of MIM Industry on Greater China in Recent Five Years
*Yau Hung Chiou1(1. You neeD Technology (China))
[17A-B1-02]Frictional properties and molecular orientations of thin film surface of solid lubricants for powder metallurgy
*HANAKO SHIMAMOTO1, Masashi Mizukami2, Kazue Kurihara2(1. JFE Steel Corporation (Japan), 2. Tohoku University (Japan))
[17A-B1-03]Single shear test for FEM analysis of powder die compaction
*Yukinori Taniguchi1, Naoki Matsumoto2, Inori Nakajima1(1. National Insutitute of Technology KOSEN, NARA College (Japan), 2. Student of National Insutitute of Technology KOSEN, NARA College (Japan))
[17A-C1-01]Effect of Electric Fields on Creep Behavior of 8Y-CSZ Polycrystals
*Koji Morita1,2,3, Kohta Nambu2, Hidehiro Yoshida4,5, Takahisa Yamamoto6, Kohei Soga3(1. National Institute for Materials Science (NIMS) (Japan), 2. Kyushu University (Japan), 3. Tokyo University of Science (Japan), 4. The University of Tokyo (Japan), 5. Next Generation Zirconia Social Cooperation Program (Japan), 6. Nagoya University (Japan))
[17A-C1-02]Phase distribution homogeneity and tensile properties in extruded PM Ti-4Fe alloys with refractory metal addition
*Takuma Teramae1, Ammarueda Issariyapat2, Shota Kariya2, Junko Umeda2, Katsuyoshi Kondoh2(1. Graduate School of Engineering, Osaka University (Japan), 2. Joint and Welding Research Institute, Osaka University (Japan))
[17A-C1-03]Enhanced mechanical properties of ultrafine-grained CuCrFeNi alloys prepared by mechanical alloying and spark plasma sintering
*Benard Peter Oboso1, Seiya Oyama1, Julia Horioka1, Li-Fu Yi1, Tetsuhiko Onda1, Shigekazu Morito2, Zhong-Chun Chen1(1. Tottori university (Japan), 2. Shimane university (Japan))
[17A-C2-01]Observation of three-dimensional internal structure of porous ceramics by confocal laser fluorescence microscopy
*Masako Uematsu1, Kento Ishii3, Teiichi Kimura1, Tetsuo Uchikoshi2(1. Japan Fine Ceramics Center (Japan), 2. National Institute for Materials Science (Japan), 3. Nagoya Institute of Technology (Japan))
[17A-C2-02]Sinterability and Age-hardenability of Cu-Cr powder
*Yuta KIGOSHI1, Yoichiro SHIMPO1(1. Fukuda Metal Foil & Powder Co., Ltd. (Japan))
[17A-C2-03]Sintering properties of Cu-Ni-Si powders
*Sho Shinohara1, Yoichiro Shimpo1(1. FUKUDA METAL FOIL & POWDER CO., LTD. (Japan))
[17A-B2-01][INVITED] Hollow-strut metal lattice materials: design, manufacturability and mechanical properties
*Ma Qian1(1. RMIT University (Australia))
[17A-B2-02][INVITED] Unlocking the Potential of Selective Electron Beam Melting: Revolutionizing Additive Manufacturing and Expanding Material Possibilities
*Huiping Tang1(1. Hangzhou City University (China))
[17A-B2-03][INVITED*] Creation of heat-resistant aluminum alloy utilizing features of laser powder bed fusion process
*Takahiro Kimura1(1. Osaka Research Institute of Industrial Science and Technology (Japan))
[17A-B2-05]Influence of Feedstock Characteristics on the In-situ Alloying Behaviour of Ti-Fe by L-PBF
*Jeff Huang1,2, Ammarueda Issariyapat2, Shota Kariya2, Junko Umeda2, Katsuyoshi Kondoh2(1. Graduate School of Engineering, Osaka University (Japan), 2. Joining and Welding Research Institute, Osaka University (Japan))
[17A-B2-06]Powder characteristics determined multiscale heat transfer in electron beam powder-bed fusion
*Yufan Zhao1,2, Kenta Aoyagi2, Yujie Cui2, Kenta Yamanaka2, Akihiko Chiba2(1. Northwestern Polytechnical University (China), 2. Institute for Materials Research, Tohoku University (Japan))
[17A-B2-07]Effects of powder surface conditions on the flowability of Ti–6Al–4V alloy powders for additive manufacturing
*Naoki Kakegawa1, Shion Nanaumi1, Weiwei Zhou1, Naoyuki Nomura1(1. Tohoku University (Japan))
[17A-B2-08]Evaluation of periodicity in 3D defect-distribution in additive manufactured Ti using Persistent Homology
*Takeshi Higaki1, Yuji Shigeta1, Ryotaro Kusunoki3, Naoyuki Nomura2, Masatoshi Aramaki1, Yukiko Ozaki1(1. Kyushu University (Japan), 2. Tohoku University (Japan), 3. Nagoya University (Japan))
[17B-F1-01][INVITED*] Further improvement of uniaxial magnetic anisotropy in La-Co co-substituted M-type ferrites
*Takeshi Waki1(1. Kyoto University (Japan))
[17B-F1-02]Evaluation of phase stability range of W-type ferrite solid solution for achieving SrMe2Fe16O27 without Fe2+
*Shinji Nakai1, Takeshi Waki1, Yoshikazu Tabata1, Hiroto Ohta2, Masaki Kato2, Hiroyuki Nakamura1(1. Kyoto University (Japan), 2. Doshisha University (Japan))
[17B-F1-03]Classification of crystal grains in annealed rapid-quenched (Sm0.8Zr0.2)1.1(Fe0.9Co0.1)11.3Ti0.7 magnetic compound using the STEP method
*Kurima Kobayashi1, Tomoko Kuno1, Hiroshi Fujiwara1(1. Ritsumeikan University (Japan))
[17B-F1-04]Analysis of the changes of the microstructures on phase transition from TbCu7-type to ThMn12-type associated with in newly ThMn12-type magnets
*Tomoko Kuno1, Yuuta Hata 1, Daiki Fujita 1, Kodai Hirata 1, Kurima Kobayashi1, Hiroshia Fujiwara1(1. Ritsumeikan University (Japan))
[17B-E1-01][INVITED] Critical aspects for an efficient assessment of novel materials designs
*Raquel de Oro Calderon1, Robert Steinlechner1, Wolf-Dieter Schubert1(1. TU Wien (Austria))
[17B-E1-02][Memorial Lecture of JSPM Award] Fundamental research and commercializing of WC-Co base ultrafine-grained cemented carbides
*Masaru KAWAKAMI1(1. Fujidie. Co., Ltd. (Japan))
[17B-E1-03][INVITED*] Study on liquid phase migration and shape distortion of WC-Co cemented carbides during sintering
*Takeshi Saito1, Hideaki Matsubara2, Yasuharu Fukuichi1, Taichi Kajiwara1, Hiroyuki Endo1(1. Kyoritsu Gokin Co., Ltd. (Japan), 2. Tohoku University (Japan))
[17B-E1-04][INVITED*] Experiment and simulation study on microstructural developments with the consideration of phase diagram calculation for WC-Co cemented carbide
*Sota Terasaka1,2, Hideaki Matsubara1,2, Masayuki Takada3, Tomohiro Tsutsumi3(1. Tohoku University (Japan), 2. Japan Fine Ceramics Center (Japan), 3. Nippon Tokushu Goukin, Co. Ltd. (Japan))
[17B-E1-05]Strategy of simulation study on cemented carbide and other hard materials.
*Hideaki Matsubara1,2, Sota Terasaka1,2(1. Tohoku University (Japan), 2. Japan Fine Ceramics Center (Japan))
[17B-E1-06]Microstructures and Properties of New Ultrafine Cemented Carbide of WC-Ti(C,N)-Cr3C2-Co
*Masayuki Takada1, Tomohiro Tsutsumi1, Yoshihiro Mori1, Hideaki Matsubara2(1. Nippon Tokushu Goukin Co., Ltd. (Japan), 2. Tohoku University (Japan))
[17B-E1-07]Comparison of Tensile and Bending Strengths of WC-Ti(C,N)-Cr3C2-Co Ultrafine-Grained Cemented Carbide
*Tomohiro Tsutsumi1,2, Hideaki Matsubara2, Masayuki Takada1, Sota Terasaka 2, Noriaki Watanabe2(1. Nippon Tokushu Goukin Co., Ltd. (Japan), 2. Tohoku University (Japan))
[17B-E1-08][Memorial Lecture of JSPM Award] Development and practical application of HiPIMS coatings for cutting tools
*Tomoya Sasaki1, Kazuyuki Kubota1(1. MOLDINO Tool Engineering, Ltd. (Japan))
[17B-E1-09]Application of AlTiBN coating for machining of exotic materials
*Yuta Suzuki1, Shinya Imamura2, Hideaki Kanaoka1(1. Sumitomo Electric Hardmetal Corp. (Japan), 2. Sumitomo Electric Hartmetallfabrik GmbH. (Germany))
[17B-A1-01]Microstructure control of porous ceramics by enzyme addition to pore-forming starch templates.
*Kento Ishii1, Megumi Ito2, Masayoshi Fuji1, Tetsuo Uchikoshi2(1. Nagoya Institute of Technology, Advanced Ceramics Research Center (Japan), 2. National Institute for Materials Science (Japan))
[17B-A1-02]Study of the effective utilization of waste concrete powder and aluminum sludge as raw materials for zeolite synthesis
*Tomohide Shinjo1, Yasuyuki Kanda2(1. University of the Ryukyus / Graduate School (Japan), 2. University of the Ryukyus (Japan))
[17B-A1-03]Formation mechanism of pudding-like ZnO microcrystals by microwave-emulsion method
*Miki Inada1, Saika Ashikari1, Michitaka Ohtaki1(1. Kyushu University (Japan))
[17B-A1-04]Effect of the deposition condition on the nano-coating process for primary particle by solution process and their application
*Tomoya Ohno1, Isei Watanabe1, Jeevan Kumar Padrti1, Shigeto Hrai1, Takeshi Matsuda1(1. Kitami Institute of Technology (Japan))
[17C-G2-01][INVITED*] Engineering Photoluminescence with Surface Lattice Resonances
*Shunsuke Murai1, Katsuhisa Tanaka1(1. kyoto University (Japan))
[17C-G2-02]Photoluminescence enhancement by electric and magnetic surface lattice resonance in zirconia nanoparticle arrays
*Makoto Higashino1, Shunsuke Murai1, Tien Yang Lo1, Shuhei Tomita1, Katsuhisa Tanaka1(1. Kyoto University (Japan))
[17C-G2-03]Silver Nanoantenna Stickers for Photoluminescence Control
*TienYang Lo1, Shunsuke Murai1, Katsuhisa Tanaka1(1. Kyoto University (Japan))
[17C-G2-04][INVITED] Dual control of enhanced quasi-bound states in the continuum emission from resonant c-Si metasurfaces
*Shaojun Wang1,2(1. School of Optoelectronic Science and Engineering & Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou 215006 (China), 2. Key Lab of Advanced Optical Manufacturing Technologies of Jiangsu Province & Key Lab of Modern Optical Technologies of Education Ministry of China, Soochow University, Suzhou 215006 (China))
[17C-G2-05][INVITED] Sequential plasmonic nanopatterns from disk, ring to hole by stencil lithography
*Kenzo Yamaguchi1(1. Tokushima University (Japan))
[17C-G2-06]Magneto-optical effect of rare-earth-rich borate glasses prepared by a levitation technique
*SHUNTA SASAKI1, KATSUHISA TANAKA2, ATSUNOBU MASUNO2(1. Graduate School of Science and Technology, Hirosaki University (Japan), 2. Graduate School of Engineering, Kyoto University (Japan))
[17C-G2-07]Fabrication and optical properties of monolithic silica glass doped with Co2+ ions using SiO2-PVA nanocomposite
*Ayumu Tanaka1, Kazuki Kohama1, Takahiro Murata2, Shigeru Fujino3(1. Interdisciplinary Graduate School of Engineering Sciences, Kyushu University (Japan), 2. Faculty of Advanced Science and Technology, Kumamoto University (Japan), 3. Global Innovation Center, Kyushu University (Japan))
[17C-G2-08]Color Variation of Persistent Luminescence in Pr3+-doped Ln3Al2Ga3O12 (Ln=Lu,Y,Gd) Garnet Transparent Ceramic Phosphors
*Qiping Du1, Jumpei Ueda2, Setsuhisa Tanabe1(1. Kyoto University (Japan), 2. Japan Advanced Institute of Science and Technology (Japan))
[17C-G2-09]Fabrication of textured transparent lanthanum silicate oxyapatite by using magnetic field and SPS
*Tohru S. Suzuki1, Akihiro Kawamura2, Harune Ariga2, Kiyoshi Kobayashi1, Hajime Kiyono2(1. National Institute for Materials Science (Japan), 2. Shibaura Institute of Technology (Japan))
[17C-G4-01][INVITED] Crystal structure and magnetic property evolution in mercury containing perovskites
*Wei-Tin Chen1,2, En-Pei Liu1,3, Chin-Wei Wang4, Mark Senn5(1. Center for Condensed Matter Sciences and Center of Atomic Initiative for New Materials, National Taiwan University (Taiwan), 2. Taiwan Consortium of Emergent Crystalline Materials, National Science and Technology Council (Taiwan), 3. Department of Physics, National Taiwan University (Taiwan), 4. National Synchrotron Radiation Research Center (Taiwan), 5. Department of Chemistry, University of Warwick (UK))
[17C-G4-02][INVITED*] Structure-property relationships in high-pressure-synthesized novel perovskite-type oxides
*Masato Goto1(1. Kyoto University (Japan))
[17C-G4-03]Charge transitions of mixed and unusually high valence Fe3.5+ in A-site layer-ordered double perovskites RBaFe2O6 (R = rare-earth metals)
*Makoto Iihoshi1, Masato Goto1, Yuichi Shimakawa1(1. Kyoto University (Japan))
[17C-G4-04]Phase transition of PbFeO3 under high pressure
*QIUMIN LIU1, Takumi Nishikubo1,2, Yuki Sakai1,2, Hena Das1,2, Ko Mibu3, Tomoko Onoue3, Takateru Kawakami4, Tetsu Watanuki5, Akihiko Machida5, Masaki Azuma1,2(1. Tokyo Institute of Technology (Japan), 2. Kanagawa Institute of Industrial Science and Technology (Japan), 3. Nagoya Institute of Technology (Japan), 4. Nihon University (Japan), 5. Synchrotron Radiation Research Center (Japan))
[17C-G4-05][INVITED] Normal state and superconducting properties of thin Kagome superconductors under pressure
*Swee K. Goh1(1. The Chinese University of Hong Kong (Hong Kong))
[17C-G4-06][INVITED*] Recent study on physical property and electronic structure of transition metal phosphides
*Hiroto Ohta1, Kojiro Takahashi1, Yusei Nishikawa1, Yuto Shirai1, Kazuyuki Mino1, Masaki Kato1(1. Department of Molecular Chemistry and Biochemistry, Doshisha University (Japan))
134 results ( 1 - 50 )
- 1