Session Details

プロセス・素材分野ポスター発表3

Wed. Sep 25, 2019 1:15 PM - 3:15 PM JST
Wed. Sep 25, 2019 4:15 AM - 6:15 AM UTC
プロセス・素材分野3 Funai Tetsuyoshi memorial hall lobby

[2P0127-39-01]The effects of ZrO2 on PGM distribution between Al2O3-CaO-SiO2 slag and molten copper at 1723K

○Kosuke Totsuka1, Katsunori Yamaguchi1 (1. Waseda University)

[2P0127-39-02]Preparation of Polymer-Modified Magnetite Nanoparticles with Anisotropic Shapes and Controlled Sizes and the Particle Alignment under Magnetic Field

○Chen Shen1, Masaki Matsubara2, Mizuhoi Yabushita1, Sachiko Maki1, Atsushi Muramatsu1, Kiyoshi Kanie1 (1. Tohoku University, 2. Sendai College)

[2P0127-39-03]Effect of polymer additives with straight-chain structure on the current efficiency and micro structure of Zn deposited from electrowinning solution

○Keita Uchida1, Satoshi Oue1, Hiroaki Nakano1, Hisaaki Fukushima1 (1. Kyushu University)

[2P0127-39-04]Distribution ratio of antimony between the FeOx-CaO-SiO2 slag and molten copper and the influence of Al2O3 on the distribution at 1573K

○Hiroyuki Yokoyama1, Katsunori Yamguchi1 (1. Waseda University)

[2P0127-39-05]Removal of Impurities from Brass Scrap

○Daigo Yamada1, Yasutaka Yoneda1, Naoki Nemoto1, Takashi Nagai1 (1. Chiba Institude of Technology)

[2P0127-39-06]Rapid synthesis Method of Copper Nanowires with High Aspect Ratios in Ascorbic Acid Aqueous Solution

○HIROKI OIKAWA1, Shun Yokoyama1, Kenichi Motomiya1, Hideyuki Takahashi1 (1. Tohoku university)

休憩

[2P0127-39-07]Kinetic study on spinel disappearance in copper smelting slag

○KAN LEE1, Katsunori Yamaguchi1 (1. waseda university)

[2P0127-39-08]Electrochemical synthesis of enforced solid solution crystals with Sn alloys by using a large overpotential deposition technique

○TATSUYA TSURUSAKI1, KYOSUKE SEKI1, TAKESHI OHGAI1 (1. Nagasaki university)

[2P0127-39-09]Effect of impurities on adsorption and desorption of Sb (Ⅲ) and Sb(Ⅴ) in sulfuric acid solution using aminophosphonic resin

○Kiyohiro Imai1, Sigeru Kawamura1, Yasushi Takasaki1, Kazutoshi Haga1, Atushi Shibayama1 (1. Akita University)

[2P0127-39-10]Control of chemical interaction at interfaces between Cu nanoparticles and substrates for fabricating adhesive electrical wirings

○Jumpei Nozaki1, Shun Yokoyama1, Kenichi Motomiya1, Hideyuki Takahashi1 (1. Tohoku University)

[2P0127-39-11]Elucidation of reaction mechanism by in-situ observation of sodium reduction with titanium tetrachloride

○Takahiro Inoue1,2, Kazuhiro Kumamoto1, Akihiro Kishimoto1, Tetsuya Uda1 (1. Kyoto University, 2. OSAKA Titanium technologies Co.,Ltd.)

[2P0127-39-12]Development of recycling process for neodymium magnet based on the Nd2O3-Na2B4O7 pseudo binary phase diagram

○Hiroki Wada1, Masaya Arai2, Kazuhiro Ogawa2, Katsunori Yamaguchi1 (1. Waseda university, 2. NISSAN MOTOR CORPORATION)

[2P0127-39-13]Extraction behavior of Ru(III), Rh(III) and Pd(II) using TBPDA-[Cnmim][Tf2N] mixed phase in nitric acid medium

○Yoshihiro Yamaguchi1, Tsuyoshi Arai1, Koichiro Takao2 (1. Shibaura Institute of Technology, 2. LANE TokyoTech)