Presentation Information
[Recycle-06]Study on CO2 Fixation in Asphalt Mixtures by Chemisorption method
*Naotoshi Watanabe1, Shingo Kitazoe1, Yoshihide Tanaka2, Yasuhiro Sakamoto2 (1. FUKUDA ROAD CONSTRUCTION CO., LTD. (Japan), 2. Nikko Co., Ltd. (Japan))
Keywords:
environment,net-zero carbon emissions,recycling,concrete sludge
The Government of Japan has set a goal of achieving a carbon neutrality, decarbonized society, until 2050 by reducing its net greenhouse-gas emissions to zero. In road pavement construction, CO2 emissions from the production of asphalt mixtures are high. The present study has investigated a method to reduce CO2 emissions during asphalt mixture production by exploiting the chemical adsorption properties of the industrial waste concrete sludge, which fixes atmospheric CO2 on its neutralization. A concrete sludge was introduced into the dryer during aggregate heating and drying to sequester the CO2 emitted in asphalt mixture production. Furthermore, the study aimed to recycle the CO2-fixed residue as a constituent material in asphalt mixtures.
In an airtight-chamber laboratory test, it was confirmed that calcium hydroxide in concrete sludge reacts with CO2 to form calcium carbonate under a high CO2 concentration condition. In experiments conducted in a test dryer, the CaCO3 content of the residue obtained after heating and drying was higher than that of the concrete sludge before feeding, confirming CO2 fixation. On the other hand, since concrete sludge had a high moisture content, the residue obtained still retained moisture and tended to agglomerate even after heating and drying.
In another test, an asphalt mixture was produced by replacing a portion of the filler and fine aggregate with the heated residue obtained from a dryer, and it was compared with a conventional mixture. Test results showed that the values for Marshall stability, retained stability, and dynamic stability were nearly equivalent to those of the conventional mixture. These results suggest that the CO2-fixed residual concrete sludge can be used as a recycled ingredient in asphalt mixtures.
The present study demonstrated the feasibility of CO2 fixation within asphalt mixtures, as well as the beneficial reuse of industrial waste materials.
In an airtight-chamber laboratory test, it was confirmed that calcium hydroxide in concrete sludge reacts with CO2 to form calcium carbonate under a high CO2 concentration condition. In experiments conducted in a test dryer, the CaCO3 content of the residue obtained after heating and drying was higher than that of the concrete sludge before feeding, confirming CO2 fixation. On the other hand, since concrete sludge had a high moisture content, the residue obtained still retained moisture and tended to agglomerate even after heating and drying.
In another test, an asphalt mixture was produced by replacing a portion of the filler and fine aggregate with the heated residue obtained from a dryer, and it was compared with a conventional mixture. Test results showed that the values for Marshall stability, retained stability, and dynamic stability were nearly equivalent to those of the conventional mixture. These results suggest that the CO2-fixed residual concrete sludge can be used as a recycled ingredient in asphalt mixtures.
The present study demonstrated the feasibility of CO2 fixation within asphalt mixtures, as well as the beneficial reuse of industrial waste materials.
