Presentation Information

[Recycle-23]An Experimental Study on Recycling Method of Polymer Modified Asphalt Mixture by Using Recycled Aggregate from Asphalt Plants

*Naoto Yokozawa1, Shota Kobayashi1, Atsushi Kawakami1, Kazuhiro Watanabe1, Satoshi Sagawa2 (1. Public Works Research Institute (Japan), 2. Japan Asphalt Mixture Association (Japan))

Keywords:

Recycling,Polymer Modified Asphalt,Laboratory Test,Formulation Design

In Japan, decades of research into the recycling of asphalt mixtures have resulted in a high recycling rate of over 99% for asphalt concrete aggregates. Meanwhile, some recycled asphalt concrete aggregates are reused as subbase materials. To achieve a circular economy, a horizontal recycling from asphalt mixture to asphalt mixture is required. Furthermore, polymer modified asphalt mixtures are used on heavy traffic routes such as expressways and national highways. However, standard recycling methods for polymer modified asphalt mixtures have not been established, thus new materials are generally applied. Establishing recycling methods for polymer modified asphalt mixtures is the critical issue.This study conducted the systematic laboratory tests on recycling methods and the properties of binders and mixtures using recycled aggregates collected from the operational asphalt plant. To establish the recycling method, cases were evaluated varying the type of new asphalt, recycled aggregate proportion (10%, 30% and 50%), and the addition of polymer modified materials. The binder tests assessed penetration, ductility, softening point, toughness and tenacity. For mixture test, Marshall test, water-soaked Marshall test, and wheel tracking test were performed, along with four-point bending test, indirect tensile fatigue test, and IDEAL-CT test to verify rutting and fatigue resistance.The laboratory test results revealed that while recycled aggregate content up to approximately 30% achieved about 70% of the performance of new material, performance significantly declined at 50% recycled aggregate proportion, particularly in fatigue resistance. Similarly, it was confirmed that when the recycled aggregate rate is high or when no polymer modified materials are added, the binder tests may fail to meet the standard values of new polymer modified asphalt.Future plans include laboratory tests simulating repeated recycling and fatigue tests using large-scale specimens. Based on these findings, it aims to establish the standard formulation design methodology for recycled polymer modified asphalt mixtures, and contribute to the realization of the circular economy.