Presentation Information
[HC-XN3Qv-03]Surface Texture Indices for Evaluating the Skid Resistance of Rigid Pavements Worn and Polished by Vehicle Tire
*Hidefumi Izuo1, Taiju Endo2, Atushi Ueno3, Chigusa Ueno4 (1. Japan Cement Association (Japan), 2. Sumitomo Osaka Cement (Japan), 3. Tokyo Metropolitan University (Japan), 4. Civil Engineering Research Institute for Cold Region (Japan))
Keywords:
Skid resitance,Macrotexture,Microtexture,Light-section method,Roughness curve
Skid resistance is crucial for road safety. And it depends on the pavement's surface texture. PIARC has identified macrotextures (wavelength:0.5-50 mm) and microtextures (wavelength:<0.5 mm) as significantly contributing to the skid resistance. In this study, both textures were measured using the light-section method, which is a non-contact and high-resolution technique for profile measurement of surface texture. A Gaussian filter was applied to the measured profile to obtain a roughness curve on a specified wavelength, for isolating microtexture profiles formed on macrotexture surfaces, and for calculating specific texture indices for the selected microtexture. The wavelengths most strongly correlated with skid resistance were 5 mm at the macro level and 0.5 mm at the micro level. Using the roughness curves at those wavelengths, various indices were calculated, including Ra (Arithmetic Mean Roughness), Rku (Kurtosis of the Roughness Profile), and Rmr1 (Material Ratio of the Roughness Profile). Their combinations were then examined to best represent changes in skid resistance due to tire wear and polishing. Furthermore, to enhance the practicality of this method for estimating skid resistance through texture measurement, we investigated techniques such as copying real-road textures using replication materials and a measuring device similar to the existing Circular Track Meter (ASTM E2157-15). Based on these results, we examined strategies to sustainably ensure skid resistance of rigid pavements.
