Presentation Information

[Recycle-03]Crack Initiation and Resistance in PET-Fibre-Reinforced High-Performance Asphalt: Insights from Thermal and Mechanical Testing

*Mohamed Saleh1, Leila Hashemian1 (1. University of Alberta (Canada))

Keywords:

Asphaltenes,PET Fibre,HPAC,4PBB,TSRST

This research examines crack initiation and fracture resistance in fibre-reinforced high-performance asphalt concrete (HPAC), leveraging recycled polyethylene terephthalate (PET) fibres and asphaltenes-modified binders to address the durability demands of cold-climate pavements. Two complementary laboratory tests are employed: the four-point bending beam (4PBB) fatigue test at intermediate temperatures and the thermal stress restrained specimen test (TSRST) at low temperatures. To assess the effectiveness of fibre modification in improving fatigue life and low-temperature cracking resistance, the experimental program targets both a Control mix, which is produced with a PG 82.9-21.8 asphaltenes-modified binder, and an HPAC mix further incorporating 0.15% of 12-mm PET fibres by total mix weight, following an optimized French-derived high-modulus gradation. In the 4PBB fatigue test (AASHTO T 321), specimens are evaluated under cyclic loading at controlled strain levels between 600 and 1200 μs, with key outputs including stiffness-cycle (S N) trends and dissipated energy rates. In parallel, the TSRST test (AASHTO TP 10) is used to characterize thermal cracking performance through fracture strength and failure temperatures. Statistical analyses are used to quantify the practical and statistical significance of PET fibre reinforcement relative to the asphaltenes-modified control mix.