Presentation Information
[Cycle_Path___Side_Walk-03]Cycle path evenness evaluation in 3D
*Roland Spielhofer1, Torsten Merkens2, Ulrike Stöckert3 (1. AIT Austrian Institute of Technology GmbH (Austria), 2. FH Aachen (Germany), 3. Federal Highway and Transport Research Institute (Germany))
Keywords:
cycle path,evenness,3D surface evaluation,condition assessment
Cycling as a modern and sustainable type of mobility is an important part of the desired mobility transition. The permanent provision of safe cycle paths in a good structural condition is therefore essential. The prerequisite for this is a reproducible condition survey and condition assessment of the existing cycling infrastructure for efficient maintenance and rehabilitation planning and to ensure comfortable and safe cycling.
Most of the common longitudinal evenness indicators are based on longitudinal profiles in the right wheel track, while transversal evenness is usually evaluated as rut depth. Both approaches are not suitable for cycle paths, as cyclists use the full width of a cycle path and are sensitive to local irregularities like edges, steps, root break-ups etc, independent of their position or direction on the cycle path surface.
In both Germany and Austria, recent research to overcome the limited concept of longitudinal and transversal evenness evaluation for cycle paths has been carried out and methods to evaluate the evenness of the full cycle path surface in 3D have been worked out. Two different technologies, a laser scanner and a 3D depth camera were used as data source. The result of the German research work was the definition of a new indicator, which enables an area-based assessment of evenness on cycle paths.
The paper describes the methodologies of data preparation, the evaluation process itself, the indicator calculation and the rating schemes that have been established in Germany and Austria. The differences between the concepts of the two countries are discussed.
In Austria, the 3D evenness evaluation is used for four years now for the yearly survey of the heavily trafficked cycle paths network along the Danube River (EuroVelo 6) with a length of 380 km, while in Germany the methodology has been applied on regional rural cycle paths networks of around 200 kilometres.
Most of the common longitudinal evenness indicators are based on longitudinal profiles in the right wheel track, while transversal evenness is usually evaluated as rut depth. Both approaches are not suitable for cycle paths, as cyclists use the full width of a cycle path and are sensitive to local irregularities like edges, steps, root break-ups etc, independent of their position or direction on the cycle path surface.
In both Germany and Austria, recent research to overcome the limited concept of longitudinal and transversal evenness evaluation for cycle paths has been carried out and methods to evaluate the evenness of the full cycle path surface in 3D have been worked out. Two different technologies, a laser scanner and a 3D depth camera were used as data source. The result of the German research work was the definition of a new indicator, which enables an area-based assessment of evenness on cycle paths.
The paper describes the methodologies of data preparation, the evaluation process itself, the indicator calculation and the rating schemes that have been established in Germany and Austria. The differences between the concepts of the two countries are discussed.
In Austria, the 3D evenness evaluation is used for four years now for the yearly survey of the heavily trafficked cycle paths network along the Danube River (EuroVelo 6) with a length of 380 km, while in Germany the methodology has been applied on regional rural cycle paths networks of around 200 kilometres.
