Presentation Information

[Data_Collection-17]Preventive Pavement Maintenance Management Using Predicted Crack Progression

*Mikako Sano1, Shuichi Kameyama2, Susumu Matsui1, Akira Sakuraba3, Toru Morioka1, Kou Onodera4 (1. Asia Air Survey Co., Ltd. (Japan), 2. Hokkaido University of Science (Japan), 3. Tairiku Kensetsu Co., Ltd. (Japan), 4. Advanced Technology Co., Ltd. (Japan))

Keywords:

preventive maintenance,mobile mapping system,point cloud data,crack,surface water

To efficiently manage pavement maintenance, a preventive maintenance approach that takes measures before damage becomes significant is required. This study proposes two methods for preventive maintenance. The first method uses only predicted crack progression from MMS point cloud data. When the crack progression was calculated on national highways in Hokkaido, it was found that sections with large crack progression had many local depressions and large amounts of road surface water in these depressions. Prioritizing repairs in areas with large crack progression can lead to more effective preventive maintenance. The second method evaluates the future damage state using the current damage state based on the crack rate—an index used to evaluate cracks in asphalt pavements in Japan—and the crack progression predicted from MMS point cloud data. This method was applied to a national highway in the Tohoku region, classifying the crack rate into three diagnostic categories (I, II, III) according to the Pavement Inspection Manual, and the crack progression into two levels ("Low (L)" and "High (H)"). Combining these classifications, the pavement condition was categorized into five groups: I-L, I-H, II-L, II-H, and III. For repairs, areas with a crack rate of III were given the highest priority, followed by areas with a crack rate of II and a high crack progression (II-H). Additionally, it was revealed that there are critical areas (I-H) with a diagnostic category of I but a high crack progression. Using this method, a more detailed evaluation considering future predictions is possible compared to the conventional evaluation based only on the crack rate. This approach is expected to contribute to preventive maintenance.