Presentation Information
[Data_Collection-30]Surface characteristics of porous concrete for Removable Urban Pavement (RUP): optimisation and monitoring under real traffic conditions
*Eric Gennesseaux1, Christophe Ropert1, Minh-Tan Do1, Thierry Sedran1, Véronique Cerezo1, Julien Waligora2, Laurent Monnier3 (1. Eiffel University (France), 2. Eiffage Infrastructure (Finland), 3. Alkern (France))
Keywords:
Porous concrete,Modular pavement,Skid resistance,Experimental monitoring,In-situ demonstrator
Nowadays, urban areas are facing new challenges as cities are growing fast and severe climatic events are being more frequent. In this context, Eiffel University is developing a promising kind of modular pavement made of interlocked pre-cast hexagonal concrete elements – the so-called Removable Urban Pavement (RUP) - which can be assembled and dissembled in order to enable access to the network underneath for maintenance and extension purposes. Because RUP simplifies the maintenance operations and can be easily recycled, it is expected to give a good overall balance of CO2 during its life time. Recently, within the framework of the French I-street project, a new permeable version was developed in collaboration with Eiffage Infrastructure and Alkern compagnies. On the top of the slabs made of self-compacting concrete with 40% of recycled aggregates, a porous concrete layer was added to absorb water immediately permitting rainwater infiltration to prevent the cities from flooding and to reduce hydroplaning risks. This layer has been optimized in terms of mechanical strength, rolling noise and skid resistance. Once an optimized mix design was chosen for the project, the permeable RUP concept was tested under the fatigue carrousel available at Eiffel University and a 200m2 demonstrator was constructed in Nantes under real traffic conditions.The present paper details firstly the optimization process in laboratory focusing on the surface characteristics aspect. Different mix designs of porous concrete were investigated in terms of skid resistance with the Wehner & Schulze testing device and of texture with the Infinite focus sensor. Then, the different parameters monitored during the fatigue carrousel test and the 3 years of service life of the in-situ demonstrator are presented and discussed.
