Presentation Information

[Material-03]Evaluation of the effect of aggregate gradation on non-exhaust particulate matter (PM) emissions in SMA

kyungnam kim1, *Jong-Sub Lee1, Soonmin Kwon1 (1. Korea Expressway Corporation Research Institute (Korea))

Keywords:

Non-exhaust particulate matter,Nominal maximum aggregate size(NMAS),Pavement abrasion,Stone Mastic Asphalt(SMA)

This study investigates non-exhaust particulate matter PM emissions generated from Stone Mastic Asphalt SMA mixtures with different nominal maximum aggregate sizes NMAS in order to identify an optimal aggregate size that can reduce PM emissions while maintaining pavement performance. To quantitatively evaluate abrasion-induced non-exhaust PM emissions according to pavement type and aggregate size, a newly developed abrasion-induced PM generation evaluation device was employed. Laboratory tests were conducted to measure PM emissions caused by pavement abrasion, and the test results were compared with field-measured PM concentrations obtained from in-service pavements. The experimental results indicate that abrasion-induced PM10 emissions tend to increase as NMAS increases. However, field measurement results show that SMA pavements exhibit lower PM10 concentrations than conventional dense-graded asphalt pavements, confirming the effectiveness of SMA mixtures in reducing non-exhaust PM emissions. Among the evaluated mixtures, SMA with an NMAS of 8 mm shows the lowest PM10 emission levels, suggesting that this aggregate size provides a favorable balance between abrasion resistance and pavement surface characteristics. In addition, correlation analysis was performed to investigate the relationship between non-exhaust PM10 concentration and pavement skid resistance. The results reveal a strong negative correlation between PM10 concentration and skid resistance. Based on this relationship, a predictive model for estimating skid resistance using non-exhaust PM10 concentration was developed. The findings of this study provide useful insights for the design and evaluation of SMA mixtures that consider both non-exhaust PM reduction and pavement safety performance.