Presentation Information
[Data_Collection-02]Study on Improving Measurement Efficiency Using Road Surface Condition Measurement Vehicle
*koichiro yoshino1, tadashi tsunematsu1, takayuki mima1 (1. THE NIPPON ROAD CO.,LTD. (Japan))
Keywords:
road surface condition measurement vehicle,MPD,aggregate scattering
In Japan, the damage level of asphalt pavement is fundamentally evaluated using three indicators: cracking ratio, rut depth, and IRI. Pavement inspection methods are decisioned to the discretion of road administrator, and pavement condition measurement vehicles are commonly used. Pavement damage varies depending on pavement type and usage conditions,-such as aggregate scattering on the pavement surface -,so in many cases, other than evaluation these three indicators requires the use of visual inspection or additional measuring equipment.This study examined ways to improve the efficiency of measurement way by using road surface condition measurement vehicles capable of measuring indicators beyond the three main ones, made possible by recent advances in measurement technology.In asphalt pavement, quantitatively evaluating aggregate scattering in porous pavements a challenge. This study Investigated an evaluation method for aggregate scattering using MPD.In the preliminary evaluation, comparisons were made between the measurement vehicle and the compact profiler on six different types of asphalt pavement surfaces. The MPD showed a difference of approximately 10%, yielding favorable results. In evaluating aggregate scattering in permeable pavement on existing roads, pavement integrity was classified into five categories through visual inspection from a vehicle. Comparing the visual inspection evalutated aggregate scattering level with MPD measurement results yielded a 91% accuracy rate, It was confirmed that they almost matched.
