Presentation Information

[Needs___History-01]Urban Pavement Condition Monitoring Using LiDAR-Instrumented Vehicles: Preliminary Experimental Evidence

Luca Colombo1, Valentina Bonora2, *Misagh Ketabdari1, Emanuele Toraldo1, Monica Meocci2 (1. Department of Civil and Environmental Engineering, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milan, Italy (Italy), 2. Department of Civil and Environmental Engineering, University of Florence, Via S. Marta, 3, 50139, Florence, Italy (Italy))

Keywords:

Pavement surface monitoring,Low-cost mobile LiDAR,Vehicle speed effects,Urban infrastructure,Data quality assessment

The increasing availability of vehicle-mounted sensing technologies offers new opportunities for continuous pavement condition monitoring, particularly in urban contexts. These technologies are primarily developed for data acquisition from the driving environment to support advanced and automated driving systems. However, the collected data can also be exploited for other purposes, such as pavement condition monitoring. Conventional technologies commonly used for pavement monitoring in extra-urban contexts (e.g., highways) are often not suitable for urban environments due to traffic, geometric constraints, and operational limitations. Among vehicle-mounted sensing technologies, LiDAR systems are particularly promising due to their ability to capture high-resolution three-dimensional surface information under real traffic conditions. Nevertheless, the influence of operational parameters, especially vehicle speed, on the quality and reliability of the collected data remains a relevant challenge.This study presents preliminary results from an experimental campaign conducted in a controlled urban test area using a vehicle instrumented with a low-cost mobile LiDAR sensor and a synchronized optical camera. The vehicle is driven repeatedly along the same pavement sections at different constant speeds (5, 10, 15, and 20 km/h). A static terrestrial laser scanner survey is carried out on the same area and used as a reference to represent the actual surface condition. The LiDAR data collected at varying speeds are then compared against this reference to assess changes in point cloud density, surface representation, and overall information content.The analysis focuses on vehicle speed as the governing variable, allowing a clear evaluation of its effect on data quality and completeness. Results indicate that increasing speed leads to a measurable reduction in spatial resolution and surface detail, with implications for the detectability of pavement features. These findings highlight the importance of defining appropriate operating conditions when using LiDAR-equipped vehicles data for pavement condition monitoring.The outcomes contribute to ongoing discussions on mobile sensing strategies for surface monitoring and support the development of reliable data-driven approaches for pavement condition assessment in smart city contexts.