Presentation Information
[Structure-03]Study on a Formula for Estimating the Average Temperature of Asphalt Mixture Layers considering Application to MWD
*Daisuke Matsumoto1, Yasushi Takeuchi2, Yuya Wakabayasahi3, Syunsuke Tanaka4, Chigusa Ueno1, Kimio Maruyama1 (1. Civil Engineering Research Institute for Cold Region (Japan), 2. Tokyo University of Agriculture (Japan), 3. National Institute for Land and Infrastructure Management (Japan), 4. Public Works Research Institute (Japan))
Keywords:
surface temperature,asphalt temperature,FWD,MWD,pavement structure
The Falling Weight Deflectometer (FWD) is widely used as a non-destructive device to assess pavement structural soundness by measuring pavement deflection values. Recently in Japan, a Moving Wheel Deflectometer (MWD) that non-destructively measures pavement deflection while moving has been developed. The MWD employs a method to estimate pavement deflection by measuring the pavement deflection velocity of the road surface with a Doppler laser, similar to the Traffic Speed Deflectometer (TSD) developed in Denmark. The values measured by the Doppler laser include not only the pavement deflection velocity but also noise from the vehicle vibrations. A key difference in Japan is the denoising method based on various signal processing techniques. The deflection values on asphalt pavements are influenced by the temperature of the asphalt mixture layers. To get comparable results measured at different times or different seasons, the measured deflection values have to be corrected to a reference temperature by using the measured or estimated average temperature of the asphalt mixture layers. In order to estimate the average temperature of asphalt mixture layers with the equation presented in Japan, we need to measure air temperature from one hour prior to FWD testing. However, because MWD testing is conducted while moving, air temperature data from one hour prior is not measurable. This study proposes a simplified multiple regression model to estimate the average temperature of asphalt mixture layers, considering application to MWD testing. Temperature data of the asphalt mixture layers were measured at domestic test fields for several years. The obtained temperature data was classified by air temperature category and pavement surface temperature category. In order to estimate the average temperature of asphalt mixture layers for each category, we conducted multiple regression analysis based on the pavement surface temperature, air temperature, and asphalt mixture layer thickness. The result showed that the average temperature of asphalt mixture layers can be estimated at less than an error of approximately 1.2 °C. This multiple regression model is expected to be utilized as one method for estimating the average temperature of the asphalt mixture layers in MWD testing.
