Presentation Information

[Recycle-10]Study on CO2 Reduction Methods in the Aggregate Heating Process of Asphalt Mixture Manufacturing

*Junji Kubota1, Shinichi Tsuchikawa1 (1. MAEDA ROAD CONSTRUCTION Co.,Ltd (Japan))

Keywords:

CO2 reduction,aggregate heating process,hydrogen,CO2-free electricity,microwave heating technology

The total CO2 emissions during asphalt mixture manufacturing in Japan are estimated to be approximately 1.5 million t-CO2 per year. The majority of these emissions occur during the aggregate heating process using a burner, resulting from the use of fossil fuels such as heavy oil. To reduce CO2 emissions during the aggregate heating process, we applied two methods to the aggregate heating process: a burner heating technology using hydrogen as fuel and a microwave heating technology using CO2-free electricity derived from renewable energy. We installed equipment for each method in an experimental plant within our technical research center and conducted operation and testing. While the burner heating technology using hydrogen as fuel presented issues with moisture generation and heating capacity during combustion, and the microwave heating technology using CO2-free electricity presented issues with heating capacity, we were able to successfully manufacture asphalt mixes. Furthermore, the mixtures produced using each method exhibited properties equivalent to those produced using the burner heating technology using heavy oil, significantly reducing CO2 emissions. However, these technologies face challenges in their operation, such as the high costs of storing and transporting the hydrogen fuel required for burner heating and the reduced heating efficiency of microwave heating, which uses CO2-free electricity. We found a way to overcome these challenges by using ammonia as a hydrogen carrier for burner heating, which uses hydrogen as fuel, and by implementing measures to reduce heat dissipation during heating for microwave heating, which uses CO2-free electricity. Further investigations suggest that these technologies could be used as CO2 reduction technologies in the near future.