Presentation Information
[Recycle-13]Evaluation of Carbonation Curing Conditions and Field Applicability of CO2-Capture Concrete Pavements
*Akane Muto1, Kengo Seki2, Ryuzo Kamishita1, Shota Taguchi1, Satoru Iwata1 (1. KAJIMA ROAD CO,. LTD (Japan), 2. KAJIMA CORPORATION (Japan))
Keywords:
CO2-Capture Concrete Pavements,γ-C2S,Carbonation curing
Global warming is a serious environmental issue. To address this problem, Japan has declared the "2050 Carbon Neutral initiative in the construction and environmental engineering sectors" various technological developments and applications are being promoted with the aim of achieving net-zero greenhouse gas emission.This study focuses on the development of CO2-capture concrete pavement technology by replacing part of the cement with commercialized γ-C2S powder. So far, we have examined the concrete mix design and fundamental physical properties of CO2-capture concrete pavement.In this research, we investigated the effects of concrete mix design conditions and carbonation curing conditions on the CO2 capture amount and physical properties. Additionally, we examined on-site carbonation curing methods using small CO2-capture concrete slabs. The results showed that although there were no significant differences in CO2 capture amounts depending on the concrete mix design, carbonation progressed more significantly under higher CO2 concentrations during curing. Furthermore, it was confirmed that CO2 concentration, curing temperature, and humidity during carbonation curing affected the physical properties of the CO2-capture concrete. For on-site curing, it was found desirable to maintain high CO2 concentration and curing temperature while keeping the humidity at approximately 50% during the carbonation curing process.In the examination of carbonation curing methods, differences in the progress of carbonation were observed depending on the concrete maturity at the start of curing. Additionally, carbonation from both the top and bottom surfaces of the CO2-capture concrete slabs was confirmed, verifying the effectiveness of on-site carbonation curing.In the future, to increase CO2 capture amounts, further studies will be conducted on material selection and concrete mix design, while continuing the development and validation of carbonation curing equipment for on-site applications.
