Presentation Information

[HC-XN3Qv-06]Development of a Multi-Point Local Vibration Method for Non-Destructive Evaluation of RC Bridge Decks

*Shinichi Watanabe1, Hideki Naito2, Takuya Maeshima3, Kohko Inaba4, Muhamad Afif Bin Osman1 (1. NIPPO CORPORATION (Japan), 2. Tohoku University (Japan), 3. Nihon University (Japan), 4. Nagaoka University of Technology (Japan))

Keywords:

Reinforced concrete deck,non-destructive testing,local vibration method,multi-point measurement,bridge maintenance

The proportion of bridges in Japan that have been in service for over 50 years is steadily increasing, resulting in growing concerns about damage to reinforced concrete (RC) bridge decks. Ensuring the structural integrity of these decks is essential for maintaining safety and functionality. To address this issue, efficient and accurate inspection technologies are urgently required. Non-destructive testing (NDT) methods, which allow evaluation without removing the pavement, are considered promising for this purpose and can significantly reduce maintenance costs and traffic disruptions.Local vibration testing is one of the NDT methods that enables relatively simple and precise assessment of structural health, and its applicability to bridge pavement has been suggested in previous studies. Building on this concept, this study developed an advanced approach incorporating simultaneous multi-point measurements to enhance detection accuracy and spatial resolution. To verify the effectiveness of the proposed method, experiments were conducted on laboratory specimens with simulated cracking and delamination, as well as on actual in-service bridges.The results indicated that generally good detection accuracy was achieved. The proposed method demonstrates strong potential as an efficient and reliable inspection technology for RC bridge decks. Although several challenges were identified for practical application, these will be addressed through future improvements to enhance its field applicability.