Presentation Information
[HC-XN3Qv-11]Performance Evaluation of SBS-Modified Asphalt for Rutting Resistance Considering Traffic and Weather Conditions in Ethiopia
*Mastewal Shumet Messele1, Naorari Shitara2, Toshiaki Hirato2, Kazuya Tomiyama1 (1. Kitami Institute of Technology (Japan), 2. Toa Road Corporation (Japan))
Keywords:
Dynamic Shear Rheometer,Multiple Stress Creep Recovery,Pavement Performance,Rutting Resistance
In Ethiopia, many road structures fail prematurely under heavy traffic loading and extreme weather conditions. The economically vital road segment from the Gohatsion-Dejen section of the Abay Gorge is particularly susceptible to rutting due to high pavement temperatures, intense traffic, and associated environmental stresses. Although numerous international studies have examined the performance of modified bitumen across various climatic zones, the use of bitumen modifiers remains limited in Ethiopia. This gap emphasizes the need for a detailed evaluation of styrene-butadiene-styrene (SBS) modification, which is the common modifier at both the binder and mixture levels, especially for hot temperature regions where rutting is a dominant pavement distress. This study investigates the mechanical performance of straight asphalt and SBS-modified asphalt at both binder and mixture scales. Performance is assessed using viscoelastic parameters, energy absorption and fracture resistance, rut depth measurements, and elastic modulus testing. A 60/80 penetration grade asphalt and a coarse-grain-sized dried SBS modifier at 5% by mass of bitumen are used in this study. The binder-level behavior was evaluated through Dynamic Shear Rheometer (DSR) testing, Multiple Stress Creep Recovery (MSCR) at 40, 50, 60, and 70℃, the Toughness and Tenacity test, and conventional binder tests. Mixture level performance was assessed using the Hamburg Wheel Tracking Test (HWTT), stiffness testing, and the Four-Point Bending Beam (4PB) test, which primarily emphasizes rutting resistance and supplementary evaluation of fatigue performance. The results show that incorporating an optimized SBS dosage significantly enhances performance at both the binder and mixture levels compared to straight asphalt, particularly in rutting resistance and other key mechanical indicators. Overall, the findings demonstrate that SBS modification can substantially improve pavement performance in Ethiopia's hot regions and provide practical guidance for material selection in temperature-sensitive road segments, which contributes to the effective and economical pavement mixture design in the country.
