Presentation Information
[Material-07]Evaluation of Rutting Resistance under Severe Conditions with Warm Mixed and High Rutting Resistance Polymer-Modified Asphalt
*Ryota Fujikawa1, Takehiro Takamoto1, Shinsuke Tanaka2 (1. Nichireki Group Co., Ltd. Technical Research Institute Research and Development Section 2 (Japan), 2. Nichireki Group Co., Ltd. Technical Research Institute Research and Development Section 2 and 3 (Japan))
Keywords:
Polymer Modified Asphalt,Rutting Resistance,Wheel Tracking Test
Asphalt pavements are widely used due to their excellent constructability and driving comfort. They are also used in airports and ports. In airports, for example, the contact pressure of aircraft is approximately 2.5 times higher than that of large vehicles. Furthermore, due to global warming, road surface temperatures can rise to nearly 70°C. Conventional Wheel Tracking Tests cannot adequately evaluate performance under such severe conditions. Ordinary tests cannot correctly assess high rutting resistance. The objective of this study is consists of the two parts. The first is to establish new test conditions that simulate harsh environments. The second is to developed a Polymer Modified Asphalt (PMA) that demonstrates excellent performance under these conditions.
We set three test conditions. Condition 1 is the ordinary condition (contact pressure 0.63 MPa, speed 42 passes/min, temperature 60°C). Condition 2 is high contact pressure and low speed (0.90 MPa, 10.5 passes/min). Condition 3 is high contact pressure, low speed, and high temperature (0.90 MPa, 10.5 passes/min, 70°C). We also evaluated the effect of pavement thickness. We performed tests using specimen thicknesses of 5cm (1 layer), 10cm (2 layers), and 15cm (3 layers).
Under Condition 1, no significant difference was observed between the existing PMA and the developed PMA. However, under Conditions 2 and 3, a clear difference in performance appeared. Under the harshest Condition 3, the Dynamic Stability (DS) of commonly used PMA in Japan was below 400 passes/mm. In contrast, the developed PMA showed a value of over 2,000 passes/mm. This test method enabled the relative evaluation of PMA with high rutting resistance, which was not possible under ordinary conditions. Also, as layer thickness increased, Dynamic Stability tended to decrease. This suggests that evaluating the entire pavement structure is important.
The developed PMA maintains flexibility while possessing high rutting resistance. Furthermore, the mixing temperature during production can be lowered to 155°C, which is below that of straight asphalt. As a result, CO2 emissions during mixture production can be reduced by approximately 9%. This paper reports on the evaluation results of rutting resistance under severe environments and the performance of the developed PMA.
We set three test conditions. Condition 1 is the ordinary condition (contact pressure 0.63 MPa, speed 42 passes/min, temperature 60°C). Condition 2 is high contact pressure and low speed (0.90 MPa, 10.5 passes/min). Condition 3 is high contact pressure, low speed, and high temperature (0.90 MPa, 10.5 passes/min, 70°C). We also evaluated the effect of pavement thickness. We performed tests using specimen thicknesses of 5cm (1 layer), 10cm (2 layers), and 15cm (3 layers).
Under Condition 1, no significant difference was observed between the existing PMA and the developed PMA. However, under Conditions 2 and 3, a clear difference in performance appeared. Under the harshest Condition 3, the Dynamic Stability (DS) of commonly used PMA in Japan was below 400 passes/mm. In contrast, the developed PMA showed a value of over 2,000 passes/mm. This test method enabled the relative evaluation of PMA with high rutting resistance, which was not possible under ordinary conditions. Also, as layer thickness increased, Dynamic Stability tended to decrease. This suggests that evaluating the entire pavement structure is important.
The developed PMA maintains flexibility while possessing high rutting resistance. Furthermore, the mixing temperature during production can be lowered to 155°C, which is below that of straight asphalt. As a result, CO2 emissions during mixture production can be reduced by approximately 9%. This paper reports on the evaluation results of rutting resistance under severe environments and the performance of the developed PMA.
