Presentation Information

[t3FRZuAM-02]Riding Quality Evaluation for Large Vehicles by Simplified IRI Measurement Device

*Yuta Takahashi1, Masayuki Eguchi1, Syuhei Tanabe1, Kazuhiko Kumada1 (1. Nippon Expressway Research Institute Company Limited (Japan))

Keywords:

Ride quality,International Roughness Index (IRI),Simplified measurement device,Large vehicles,Daily visual inspection,Inter-vehicle discrepancy

Safety and ride quality are critical for road users. On Japanese expressways, daily visual inspections rely on subjective experiences in passenger vehicles, making it difficult to objectively evaluate road flatness for different vehicle types like large buses. While trial studies exist for heavy vehicles, long-term comparative research between heavy and normal vehicles in the same location is lacking. This study addresses this gap by using simplified International Roughness Index (IRI) measurement devices to evaluate road surface characteristics and their impact on ride quality.In recent years, technology has been developed to simply estimate the IRI using smartphones. By downloading an IRI application and putting it on a vehicle, it is possible to automatically obtain large amounts of data at low cost. Utilizing these simplified IRI data obtained from both large buses and normal cars ensures objective evaluation of road roughness, considering the differences between vehicle categories.This report shows analyzed results of road surface characteristics influencing heavy vehicle ride quality to develop a new evaluation method. Data was repeatedly obtained from highway buses and daily inspection vehicles (SUVs) on the same section using simplified IRI measurement devices. The devices used are smartphones and other devices with a commercially available IRI application. In total, data was collected over approximately 400 days, covering a 60 km intercity expressway section in Japan.As a result of comparing and evaluating simplified IRI values from large buses and inspection cars, specific road surface conditions significantly influence the discrepancy of IRI values. Additionally, this study investigated and clarified the relationship between road surface damage likely to affect ride quality and the occurrence ratio of damage for heavy vehicles. These results suggest the possibility of applying this method to evaluate the different characteristics of vehicles such as large buses, when considering the factor of ride quality.