Presentation Information

[NpVBMPAo-06]Development of a Warm-Mix Polymer-Modified Asphalt for Recycling with up to 50% Reclaimed Asphalt Pavement

*Takehiro Takamoto1, Reon Shirasu1, Sinsuke Tanaka1 (1. NICHIREKI GROUP CO., LTD (Japan))

Keywords:

GHG emission reduction,reclaimed asphalt pavement,recycled asphalt mixture,polymer-modified asphalt for recycling,warm-mix asphalt

In response to global efforts to mitigate climate change, initiatives aimed at reducing greenhouse gas (GHG) emissions are being promoted worldwide. In pavement field, there is a growing demand to reduce environmental impacts associated with materials, mixture production, and construction processes. Approaches for GHG emission reduction in pavement field can be classified into four categories: (1) extending the life of roads, (2) utilization of reclaimed aggregates (RA), (3) introduction of warm-mix asphalt (WMA) technology, and (4) use of non-petroleum-based materials. These approaches have been applied individually or in partial combinations. However, pavement materials that simultaneously satisfy all four requirements remain limited in practice.To resolve this issue, the authors developed a pavement material integrating all four elements. Most conventional recycled asphalt mixtures are produced as hot mix asphalt (HMA) using straight asphalt, resulting in insufficient durability. In this study, polymer-modified asphalt (PMA) was applied to enhance mixture durability, enabling extending the life of roads and application to heavy-traffic pavements. From the perspectives of GHG emission reduction and effective RA utilization, the RA content was set at a maximum of 50%. Furthermore, by combining warm-mix asphalt technology, the mixing and construction temperatures were reduced by 30℃. In addition, the warm-mix additive used is based on plant-derived materials.In Japan, quality specifications for binders designed for recycled PMA have not yet been established. Therefore, the recycled binder, which comprises aged asphalt and virgin asphalt, was designed to satisfy the quality requirements of PMA commonly used in Japan. Consequently, recycled PMA mixtures suitable for heavy-traffic pavements were successfully produced. Furthermore, CO2 emissions during mixture production were evaluated as an indicator of GHG reduction, indicating an estimated reduction of approximately 18% compared with conventional HMA produced using virgin aggregates.Overall, the warm-mix polymer-modified asphalt for recycling developed in this study achieves high RA content, enhanced durability through PMA application, reduced production temperatures via WMA technology, and partial replacement of petroleum-based materials. These results demonstrate that the proposed material is an effective solution for GHG emission reduction in pavement field.