Presentation Information
[Structure-09]Influence of Pavement Surface Characteristics on Fine Particle Generation: A Controlled Rolling Experimental Study
Antoine-Victor CHAVAS1, *MOHAMED BOUTELDJA1, Nicolas GRIGNARD1, Younes RIZOUG-ZEGHLACHE2 (1. Cerema (France), 2. Sigma-clermont (France))
Keywords:
Pavement Surface Characteristics,Abrasion Mechanisms,Fine particle generation,Wehner & Schulze Device,Road traffic particulate matter
Particulate matter (PM) emissions are a major global environmental and public health concern, with road transport being a significant contributor. While technological advances in the automotive sector have substantially reduced exhaust-related emissions, non-exhaust sources (such as tyre wear, brake wear, road surface abrasion, and material resuspension) have become the dominant contributors to traffic-related particulate emissions. Although tyre and brake emissions are well documented, the influence of road surface characteristics on PM generation remains insufficiently investigated. This knowledge gap highlights the need for controlled experimental approaches capable of isolating abrasion mechanisms and clarifying the relationship between pavement properties and non-exhaust PM emissions.
The objective of this study is to experimentally assess the feasibility of using an instrumented Wehner&Schulze polishing device operating under dry rolling conditions as a traffic simulator for non-exhaust PM generation. In parallel, the study also aims to: characterise the thermo-mechanical behaviour of rubber polishing cones under dry rolling conditions, quantify the device’s ability to generate PM and distinguish particle generation due to abrasion from resuspension effects.
Results show that the rubber polishing cones exhibit a thermal behaviour comparable to that of tyres under real driving conditions, with a rapid initial temperature increase followed by stabilisation. Maximum cone temperatures remain moderate (∼35°C), indicating stable viscoelastic behaviour throughout the tests. At low rotational speeds, PM emissions are negligible and dominated by background concentrations and resuspension. A clear transition is observed at higher rotational speeds, leading to sustained PM generation, with PM10 mass concentrations exceeding health-based thresholds. Furthermore, a progressive depletion of the asphalt sample’s emission potential is observed, highlighting the influence of prior mechanical loading on PM generation.
This study demonstrates the technical relevance of using the Wehner&Schuze device under dry rolling conditions to investigate non-exhaust PM emissions from road surfaces.
The objective of this study is to experimentally assess the feasibility of using an instrumented Wehner&Schulze polishing device operating under dry rolling conditions as a traffic simulator for non-exhaust PM generation. In parallel, the study also aims to: characterise the thermo-mechanical behaviour of rubber polishing cones under dry rolling conditions, quantify the device’s ability to generate PM and distinguish particle generation due to abrasion from resuspension effects.
Results show that the rubber polishing cones exhibit a thermal behaviour comparable to that of tyres under real driving conditions, with a rapid initial temperature increase followed by stabilisation. Maximum cone temperatures remain moderate (∼35°C), indicating stable viscoelastic behaviour throughout the tests. At low rotational speeds, PM emissions are negligible and dominated by background concentrations and resuspension. A clear transition is observed at higher rotational speeds, leading to sustained PM generation, with PM10 mass concentrations exceeding health-based thresholds. Furthermore, a progressive depletion of the asphalt sample’s emission potential is observed, highlighting the influence of prior mechanical loading on PM generation.
This study demonstrates the technical relevance of using the Wehner&Schuze device under dry rolling conditions to investigate non-exhaust PM emissions from road surfaces.
