Presentation Information
[Data_Collection-10]Formation of homogeneous sections based on bearing capacity measurements for maintenance planning
*Tim Schrödter1, Pahirangan Sivapatham1 (1. University of Wuppertal (Germany))
Keywords:
Homogeneous sections,segmentation,bearing capacity,Traffic Speed Deflectometer,TSD,maintenance planning
Inhomogeneities in road pavements are unavoidable. Differences arise due to the use of natural aggregates, deviations in the construction process, the age of the pavement, the maintenance history or varying degrees of wear and tear of the road pavement. The segmentation of road pavements into homogeneous sections is of great importance for systematic and uniform maintenance planning and the evaluation of the structural condition of pavements. In maintenance planning, the formation of homogeneous sections is used as a preliminary stage for the definition of construction sections. As part of the evaluation of the structural condition, the formation of homogeneous sections is carried out in order to minimize the testing and evaluation effort and to enable representative sampling.
The results of bearing capacity measurements with the Traffic Speed Deflectometer (TSD) can be used for the segmentation of a road into homogeneous sections, as they describe the structural condition of the entire road structure and can be carried out network-wide. A large number of bearing capacity characteristic values exist internationally, from which different information can be obtained, for example on the bearing capacity of the bound superstructure or the subgrade.
As part of a comparative study, homogeneous sections were formed for selected test sections based on different bearing capacity characteristic values. The deflection in the center of the load D0, the surface curvature indices SCI200, SCI300 and SCISUB as well as the bearing capacity number Tz were considered. The analyses have shown that the choice of the bearing capacity characteristic value has an influence on the number and the distribution of homogeneous sections. Based on comparisons with existing construction data and known changes of construction sections, the informative value of segmentations using different bearing capacity characteristic values was examined and recommendations for implementation into the maintenance planning were made.
The results of bearing capacity measurements with the Traffic Speed Deflectometer (TSD) can be used for the segmentation of a road into homogeneous sections, as they describe the structural condition of the entire road structure and can be carried out network-wide. A large number of bearing capacity characteristic values exist internationally, from which different information can be obtained, for example on the bearing capacity of the bound superstructure or the subgrade.
As part of a comparative study, homogeneous sections were formed for selected test sections based on different bearing capacity characteristic values. The deflection in the center of the load D0, the surface curvature indices SCI200, SCI300 and SCISUB as well as the bearing capacity number Tz were considered. The analyses have shown that the choice of the bearing capacity characteristic value has an influence on the number and the distribution of homogeneous sections. Based on comparisons with existing construction data and known changes of construction sections, the informative value of segmentations using different bearing capacity characteristic values was examined and recommendations for implementation into the maintenance planning were made.
