Materials Research Meeting 2025 (MRM2025)
Advanced Search

Poster presentation

Poster 102

Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Filtered results: 105

Narrow down the search

Category
Filter search results

[A1-P102-01]Surface affinity of ceramics nanoparticles with organic solvents investigated by a time-domain nuclear magnetic resonance (TD-NMR)

*Taiyo Kibe1, Tomoya Nagata2, Ariga Kato2, Junko Ikeda4,3, Paul Kinyanjui Kimani1, Chika Takai-Yamashita1,3
(1. Nagoya Inst. Technol. (Japan), 2. Gifu Univ. (Japan), 3. Tohoku Univ. (Japan), 4. Mageleka Japan Co,. Ltd. (Japan))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[A1-P102-02]Facile Evaluation of Structural Colors for Colloidal Photonic Crystals

*Ken Umetani1, Hirosi Fudouzi2, Ryouhei Oka1, Tomokatu Hayakawa1
(1. Nagoya Inst. Tech. (Japan), 2. Natl. Inst. Mater. Sci. (Japan))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[A1-P102-03]Formation of Interfacial Nanostructures for Promoting Heteroepitaxial Growth of Perovskite Chalcogenides

*Shinya Naito1, Sumbal Jamshaid2, Naoki Nishiyama1, Peter J Wellmann2, Reina Miyagawa1,3
(1. Nagoya Inst. of Tech. (Japan), 2. Friedrich-Alexander Univ. Erlangen-Nürnberg (Germany), 3. National Inst. for Fusion Sci. (Japan))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[A1-P102-04]Local Structural Analysis of (K, Na)NbO3-Doped SiO2–Na2O–Al2O3 Glass Ceramics using Synchrotron Radiation

*Satoma Yoshizawa1, Koji Kimura1,3, Maria Rita Cicconi2, Yohei Onodera3, Hiroumi Maegawa1, Jens. R. Stellhorn4, Hiroo Tajiri5, Hongyi Deng2, Shinya Hosokawa4, Tomokatsu Hayakawa1, Shinji Kohara3, Koichi Hayashi1
(1. Nagoya Inst. of Tech. (Japan), 2. Friedrich-Alexander-Univ. Erlangen-Nürnberg (Germany), 3. National Inst. for Materials Sci. (Japan), 4. Shimane Univ. (Japan), 5. Japan Synchrotron Radiation Res. Inst. (Japan))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[A1-P102-05]Electric Field Effect on the Phase Transition in (K0.95Li0.05)(Nb1–xTax)O3

*Tomoya Koketsu1, Makoto Iwata1, Takuto Omichi1, Yoshinori Takikawa1, Koji Kimura1
(1. Nagoya Institute of Technology (Japan))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[A1-P102-06]Control of Crystalline Properties in BaTiO3 Films by Femtosecond Laser Irradiation

*Takahito Inoue1, Shinya Naito1, Michel Kuhfuß2, Martin Alexander1, Kyle Grant Webber2, Ken-ichi Kakimoto1, Reina Miyagawa1,3
(1. Nagoya institute of Technology (Japan), 2. Friedrich-Alexander-Universität (Germany), 3. National Institute for Fusion Science, National Institutes of Natural Sciences (Japan))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[A1-P102-08]The Crystal Structure and Dielectric Property of Perovskite-type ANbO3 and ATaO3 (A=alkali metal)

*Kimitoshi Murase1, Kazumasa Sugiyama2, Toru Kawamata2, Yosuke Hamasaki3, Jun-ichi Yamaura4, Ayako Yamamoto1
(1. Shibaura Inst. Tech. (Japan), 2. Inst. Materials Res., Tohoku Univ. (Japan), 3. National Defense Academy (Japan), 4. Inst. Solid State Physics, Univ. Tokyo (Japan))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[A1-P102-11]In-situ AP-HAXPES Observation of Photocatalytic Reaction Dynamics on Anatase TiO2 under UV Illumination and Water Vapor Environment

*Keita Murase1, Hidetoshi Miyazaki1, Joji Mizuno1, Yasumasa Takagi2, Satoshi Yasuno2, Juhana Jaafar3, Naoko Yoshida1,4
(1. Nagoya Insitute of Technology (Japan), 2. Japan Synchrotron Radiation Research Institute (Japan), 3. Universiti Teknologi Malaysia (Malaysia), 4. Nagoya University (Japan))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[A1-P102-13]Vibration Sensing Using a Leveling Bolt with a Built-in Piezoelectric Element

*Yuya Watanabe1, Paul Steinmann2, Keta Seki1
(1. Nagoya Inst. of Tech. (Japan), 2. FAU (Germany))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[A1-P102-14]Oxygen Permeability of Ba-Fe Perovskites Doped with Ca at the B-Site

*Sou Sugiyama1, Isao Kagomiya1
(1. Nagoya Institute of Tech. (Japan))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[A1-P102-16]Temperature dependence of local structure in Sm-doped BiFeO3 thin film

*Kaima Okazaki1, Seiji Nakashima1, Marika Kawakami1, Koji Kimura2, Naohisa Happo3, Hiroo Tajiri4, Ai I. Osaka1, Koichi Hayashi2, Hironori Fujisawa1
(1. Univ. of Hyogo (Japan), 2. Nagoya Inst. Tech. (Japan), 3. Hiroshima City Univ. (Japan), 4. JASRI (Japan))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[A1-P102-17]Analysis of Percolation in Self-Assembled BaTiO3/PVDF Composites Using a Scale-Free Network Model

*Taito Ogiya1, Yoshihiro Sato2, Kent Ishiii1, Yuka Takagi3, Fumio Munakata2, Shuichi Iwata1, Masayoshi Fuji1
(1. Nagoya Institute of Tech. (Japan), 2. Tokyo City Univ. (Japan), 3. Tokyo Univ. of Science (Japan))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[A1-P102-19]Dielectric and Piezoelectric Properties of Acceptor-doped BaTiO3: A Molecular Dynamics Simulation Study

*Hikaru Azuma1, Takumi Nozaki1, Shuji Ogata1, Ryo Kobayashi1, Masayuki Uranagase2, Yuta Takahashi1
(1. Nagoya Inst. Tech. (Japan), 2. RIKEN (Japan))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[A1-P102-20]Photo-rechargeable fuel cell using quinone molecules

*Daiki Hayashi1, Yosuke Ishii1, Shinji Kawasaki1
(1. Nagoya Institute of Technology (Japan))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[A1-P102-21]Pulping and structural analysis of agricultural waste for cellulose nanofiber production

*Sora Iwaizumi1, Chisaki Katagiri2, Yoshika Tachi2, Paul Kinyanjui Kimani1, Chika Takai-Yamashita1,3
(1. Nagoya Institute of Technology (Japan), 2. Gifu Univ. (Japan), 3. Tohoku Univ. (Japan))

Poster SessionA. Cross-disciplinary Research in Fundamental Materials Science : [A-1] Ceramics Based Energy Harvesting Materials and Devices
[A1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-01]Effect of Microstructure introduced by Laser-Powder Bed Fusion Type Additive Manufacturing with Super-Thermal Field on Spinodal Decomposition and Magnetic Properties

*Takato Saito1, Yuheng Liu1, Masayuki Okugawa1, Kazuhisa Sato1, Takayoshi Nakano1, Yuichiro Koizumi1
(1. The Univ. of Osaka (Japan))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-02]Oxidation Behavior of Inconel 625 Superalloy Fabricated with Laser-Powder Bed Fusion

*Doyeoul Ko1,2, Byoungsoo Lee1, Hyuksu Han2
(1. Korea Institute of Industrial Tech (Korea), 2. Sungkyunkwan Univ (Korea))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-03]Behaviors of Surface Modification in the Microblasted Inconel 718 Superalloy Fabricated with Laser-Powder Bed Fusion

*Seojin Lee1,2, Byungsoo Lee1, Hyuksu Han2
(1. Korea Institute of Industrial Technology (Korea), 2. Sungkyunkwan University (Korea))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-04]Formation Mechanism of Cellular Structure in Nickel-based Superalloys Fabricated by Additive Manufacturing

*Kippei Yamashita1, Ken Cho1,2, Takuma Saito3, Taisuke Sasaki3, Katsuhiko Sawaizumi1, Masayuki Okugawa1,2, Yuichiro Koizumi1,2, Takayoshi Nakano1,2, Hiroyuki Y. Yasuda1,2
(1. Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University (Japan), 2. Anisotropic Design & Additive Manufacturing Research Center, Graduate School of Engineering, Osaka University (Japan), 3. Research Center for Magnetic and Spintronic Materials, National Institute for Materials Science (Japan))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-07]Formation Mechanism of α2/γ Nanolamellar Structure in TiAl Alloy Fabricated by Additive Manufacturing

*Yoshiki Kono1, Ken Cho1, Masao Takeyama2, Takayoshi Nakano1, Hiroyuki Yasuda1
(1. Osaka University (Japan), 2. Institute of Science Tokyo (Japan))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-08]Development of Power Bed Fusion Process for TiAl Alloys with
Graded Microstructure

*Yuito Ueda1, Ken Cho1,2, Masao Takeyama3, Takayoshi Nakano1,2, Hiroyuki Y Yasuda1,2
(1. Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University (Japan), 2. Anisotropic Design & Additive Manufacturing Research Center, Osaka University (Japan), 3. Institute of Science Tokyo (Japan))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-09]High Temperature Fatigue Properties of β-Containing TiAl Alloys Fabricated by Metal Additive Manufacturing

*Ken Cho1, Haruki Konishi1, Masao Takeyama2, Takayoshi Nakano1, Hiroyuki Y. Yasuda1
(1. The Univ. of Osaka (Japan), 2. Inst. of Science Tokyo (Japan))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-10]Formation Behavior in Ti-Cr-Sn Superelastic Alloy Fabricated by LPBF

*Ryo Takeo1, Cheng Chen1, Naoki Nohira1, Aya Harashima1, Ryosuke Ozasa2,3, Masaki Tahara1, Takuya Ishimoto2,3,4, Yuichiro Koizumi2,3, Takayoshi Nakano2,3, Hideki Hosoda1
(1. Inst. of Integrated Res. , Inst. of Sci. Tokyo (Japan), 2. Graduated School of Engineering, The Univ. of Osaka (Japan), 3. AM Center, The Univ. of Osaka (Japan), 4. Aluminum Res. Center, Univ. of Toyama (Japan))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-11]Analyses of Phase, Microstructure, and Mechanical Properties of Laser Powder Bed Fusion-Produced (α+β)-type/β-type Ti-Alloys Interface

*Takuya Ishimoto1,2, Sho Maegawa1, Ryuto Okazaki1, Tomoyo Manaka1, Takayoshi Nakano2
(1. Univ. of Toyama (Japan), 2. The Univ. of Osaka (Japan))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-12]Effect of line energy on the microstructure and mechanical properties of Co-Cr-Mo alloys fabricated with directed energy deposition

*Minho Choi1,2, HeungNam Han2, Byoungsoo Lee1
(1. Korea Institute of Industrial Tech. (Korea), 2. Seoul national Univ. (Korea))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-17]High-efficiency and high-fidelity simulation method for microstructure prediction of various scan strategies in powder bed fusion

*Yuki Takahashi1, Konosuke Ikeda1, Shinji Sakane1, Tomohiro Takaki1
(1. Kyoto Institute of Tech. (Japan))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-18]Controlling Al/carbon fiber interfacial reaction during laser irradiation toward local control of thermal conductivity through laser powder bed fusion

*Kazuki Nakamura1, Asuka Suzuki1, Makoto Kobashi1
(1. Nagoya Univ. (Japan))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-19]Effect of Cr addition on microstructural development of Al-Fe-Mn alloy additive-manufactured by laser powder bed fusion process

*Koki Minamihama1, Yifan Xu1, Junji Umeda2, Yuhki Tsukada3, Naoki Takata3
(1. Department of Materials Process Engineering, Nagoya Univ. (Japan), 2. Aichi Center for Industry and Science Technology (Japan), 3. Department of Materials Design Innovation Engineering, Nagoya Univ. (Japan))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-20]Effects of laser conditions on the inhomogeneous microstructure and tensile properties of hypereutectic Al-20Si alloys fabricated by laser powder bed fusion

*Koya Matsui1, Koki Minamihama1, Asuka Suzuki1, Naoki Takata1, Makoto Kobashi1, Junji Umeda2
(1. Nagoya Univ. (Japan), 2. Aichi Center for Industry and Science Technology (Japan))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-21]Asymmetry of Equiaxed Crystals Formation in a Melt Pool of Al-Cu Alloy

*Kosei Nakaoka1, Kohei Morishita1
(1. Kyushu Univ. (Japan))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-22]Molecular dynamics simulations of heterogeneous nucleation in Al alloys during rapid heating and cooling in super-thermal fields in powder bed fusion process

*Hirotaka Takashima1, Masayuki Okugawa1, Yuichiro Koizumi1
(1. The Univ. of Osaka (Japan))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[C1-P102-28]Effect of Nitrogen Ion Implantation on Thermal Conductivity of Graphite Sheets

*Kang Kyu Na1, Hak Jun Lee1, Ju Ho Park1, Chae Yeon Kim1, Cheol Hee Moon1
(1. Hoseo university (Korea))

Poster SessionC. Next Generation Advanced Materials Through Nanostructure Control Technology : [C-1] Creation of Materials by Super-Thermal Field 2025
[C1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[E1-P102-01]Gelatin adhesives for wood materials with thermoplasticity using cross-linking with polycations and phenolic-derivatives.

*Masahiko INAGAKI1, Masako SEKI1, Mitsuru ABE1, Tsunehisa MIKI1
(1. National Institute of Advanced Industrial Science and Technology (AIST) (Japan))

Poster SessionE. Advancing Sustainable Materials, Energy, and Recycling Technologies : [E-1] Advanced Composite Processing and Technology for Sustainable Developments
[E1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)

[E1-P102-02]Synthesis of methacrylic resin with glycol lignin

*Atsuhiko Yamanaka1, Hirofumi Nishida1
(1. Kanazawa Institute of Technology (Japan))

Poster SessionE. Advancing Sustainable Materials, Energy, and Recycling Technologies : [E-1] Advanced Composite Processing and Technology for Sustainable Developments
[E1-P102]Poster 102
Tue. Dec 9, 2025 3:30 PM - 5:30 PM JST
Tue. Dec 9, 2025 6:30 AM - 8:30 AM UTC
Poster(G1+G2)
105 results ( 1 - 50 )
  • 1
Back to Timetable