講演情報
[HC-XN3Qv-01]An on-road methodology for the assessment of the performance of friction test devices
*Peter Sanders1, Håkan Frank1, Björn Zachrisson1, Johan Petersson1 (1. NIRA Dynamics AB (Sweden))
キーワード:
Friction、Skid resistance、Connected vehicle
The relationship between road surface friction and vehicle safety is self-evident. This relationship means that the effective management of friction is critical in maintaining a safe environment for all road users. At the same time, tyre / road friction generation is dynamic and dependent upon many factors.
In recent years, novel works have identified a disconnect between the friction measured by test devices, and the friction utilized by vehicles (skid resistance disparity). This has prompted investigations into the use of connected vehicle data for pavement friction management. These developments (skid resistance disparity, and connected vehicle friction data), raises a key question: “How do we know if we are measuring friction correctly?”
Traditional methods for assessing friction test devices (comparing measurements made by a friction test device with some reference) raises the following issues. In the case of traditional test devices, it cannot necessarily be ensured that the reference does not also suffer from skid resistance disparity. For connected vehicle data, it cannot necessarily be ensured that measurements made on an ad-hoc basis i.e. on a test track, are representative of measurements made on-the-road.
This paper presents a methodology for an on-the-road assessment of friction test devices that accounts for skid resistance disparity. A limited case study is presented where this methodology was applied to the assessment of connected vehicle friction data.
In recent years, novel works have identified a disconnect between the friction measured by test devices, and the friction utilized by vehicles (skid resistance disparity). This has prompted investigations into the use of connected vehicle data for pavement friction management. These developments (skid resistance disparity, and connected vehicle friction data), raises a key question: “How do we know if we are measuring friction correctly?”
Traditional methods for assessing friction test devices (comparing measurements made by a friction test device with some reference) raises the following issues. In the case of traditional test devices, it cannot necessarily be ensured that the reference does not also suffer from skid resistance disparity. For connected vehicle data, it cannot necessarily be ensured that measurements made on an ad-hoc basis i.e. on a test track, are representative of measurements made on-the-road.
This paper presents a methodology for an on-the-road assessment of friction test devices that accounts for skid resistance disparity. A limited case study is presented where this methodology was applied to the assessment of connected vehicle friction data.
