講演情報
[NpVBMPAo-03]Study on the practical use of cold mix asphalt in Japan
*Hui Qu1, Atsushi Nagahara1 (1. TOA ROAD CORPORATION (Japan))
キーワード:
cold mix asphalt、asphalt emulsion mixtures、modified asphalt emulsion
In Japan, reducing greenhouse gas emissions in the construction industry has become an urgent issue toward achieving carbon neutrality by 2050. In particular, conventional hot mix asphalt for paving must be heated to approximately 180°C during production, leading to substantial CO2 emissions. Therefore, there is a strong demand for paving technologies that can mitigate environmental impact, and cold mix asphalt is regarded as one of the viable technological solutions.
Within the category of cold mix asphalt materials, cold mix asphalt can be manufactured simply by mixing aggregate with asphalt emulsion as a binder. Without heating requirements during manufacturing, it serves as an environmentally friendly paving material that can significantly reduce CO2 emissions. Furthermore, since cold mix asphalt can be manufactured at ambient temperature, it enables a more resilient material supply system regardless of location, which is advantageous for addressing supply shortages arising from the decline in asphalt plants and for rapid road network restoration during disaster recovery.
However, conventional emulsion-based cold mix asphalt has faced several challenges. Although mixing stability and workability are essential for consistent production and construction, long curing times for binder film formation on aggregate surfaces and low initial strength have delayed traffic opening. To overcome these issues, we developed a new cationic modified asphalt emulsion for mixing that improves adhesion to aggregates and achieves rapid strength development through emulsion breaking and subsequent compaction. In addition, performance was enhanced by optimizing the mix design methodology. Notably, the adoption of plant-based retarding agents with water-retention effects markedly improved the storage stability of the mixture after production, enabling quality-assured cold mix construction even at sites far from manufacturing plants, which had previously been difficult.
This study presents the characteristics of the newly developed modified emulsion and the resulting asphalt emulsion cold mix, and reports on practical applicability verified through trial construction on public roads in Tokyo. The field trials demonstrated sufficient time flexibility between production and construction, together with satisfactory improvements in initial strength and durability. Furthermore, the pavement surface condition remained stable even after two years of service, indicating significant progress toward practical implementation.
Within the category of cold mix asphalt materials, cold mix asphalt can be manufactured simply by mixing aggregate with asphalt emulsion as a binder. Without heating requirements during manufacturing, it serves as an environmentally friendly paving material that can significantly reduce CO2 emissions. Furthermore, since cold mix asphalt can be manufactured at ambient temperature, it enables a more resilient material supply system regardless of location, which is advantageous for addressing supply shortages arising from the decline in asphalt plants and for rapid road network restoration during disaster recovery.
However, conventional emulsion-based cold mix asphalt has faced several challenges. Although mixing stability and workability are essential for consistent production and construction, long curing times for binder film formation on aggregate surfaces and low initial strength have delayed traffic opening. To overcome these issues, we developed a new cationic modified asphalt emulsion for mixing that improves adhesion to aggregates and achieves rapid strength development through emulsion breaking and subsequent compaction. In addition, performance was enhanced by optimizing the mix design methodology. Notably, the adoption of plant-based retarding agents with water-retention effects markedly improved the storage stability of the mixture after production, enabling quality-assured cold mix construction even at sites far from manufacturing plants, which had previously been difficult.
This study presents the characteristics of the newly developed modified emulsion and the resulting asphalt emulsion cold mix, and reports on practical applicability verified through trial construction on public roads in Tokyo. The field trials demonstrated sufficient time flexibility between production and construction, together with satisfactory improvements in initial strength and durability. Furthermore, the pavement surface condition remained stable even after two years of service, indicating significant progress toward practical implementation.
