講演情報
[Recycle-07]Investigation of CO2-Fixing Pervious Concrete for Pavement Decarbonization
*Hiroshi FUJII1, Kazuhiro YAMAUCHI2, Takafumi NOGUCHI3 (1. The Nippon Road Co., Ltd. (Japan), 2. Haikou Onoda Remicon Inc. (Japan), 3. The University of Tokyo (Japan))
キーワード:
White carbon、CO2 fixation、Carbonation curing、Pervious concrete、Concrete pavement
In response to global climate change, the reduction of CO2 emissions and the removal of atmospheric CO2 have emerged as transboundary challenges, prompting extensive research initiatives worldwide. Within the domain of pavement engineering, the coexistence of road infrastructure development and carbon neutrality is increasingly required, driving efforts to reconcile both objectives in practice and research. Accordingly, the authors are conducting research under the Green Innovation Fund Program of the New Energy and Industrial Technology Development Organization (NEDO) on low-carbon concrete pavement technologies, focusing on the development of techniques for CO2 fixation in materials or pavement structures.Previous studies have examined the production of CO2 fixed aggregate by applying accelerated carbonation to concrete waste, such as returned concrete, aiming to enhance resource circularity and carbon fixation within pavement materials. In addition, the study has assessed the mix design approach and constructability of pervious concrete utilizing the CO2 fixed aggregate, demonstrating its feasibility for practical implementation. While pervious concrete is anticipated to fix CO2 during both curing and service phases owing to its high surface area, the underlying mechanisms and quantitative performance have yet to be fully elucidated.This study investigates CO2 fixation in pervious concrete through two approaches: (1) carbonation experiments targeting the cement paste component, and (2) evaluation of fixation performance using pervious concrete specimens. Specifically, cement paste specimens were cured using multiple methods, including carbonated in an accelerate carbonation chamber and cyclic wetting and drying in the laboratory, and other method. The amount of CO2 fixation was quantified, considering the influence of the water-to-binder (W/B) ratio. Additionally, curing solutions containing either tap water or cement sludge water were used to treat pervious concrete specimens, and the influence of these solutions on CO2 fixation was investigated. The results of this investigation are reported herein.
