講演情報

[Data_Collection-15]Effect of aggregates’ hardness on tire-road wear particle emissions

*Manuela Lopes Gennesseaux1, Stepan Bobrovnikov1, Minh-Tan Do1, Bogdan Muresan-Paslaru1 (1. Université Gustave Eiffel (France))

キーワード:

Tire-road wear particles (TRWPs)、Particle Emission、Wear Mechanism、Road Surface

Wear of roads and tires under traffic generates debris known as tire-road wear particles (TRWPs). These particles can be deposited on the road surface or emitted in the atmosphere. Understanding the relationship between wear and particle generation and how pavement constituents influence this relationship is important for linking material design to surface characteristics and environmental impact. This paper presents a laboratory study combining wear testing and particle measurement. The wear testing uses a pin-on-disc tribometer, which simulates the sliding of a tire tread block (pin) on a road surface (disc). The tribometer is placed inside a closed chamber to ensure that the collected TRWP are not mixed with other types of particles like dust. The chamber is connected to an electrical low-pressure impactor (ELPI) to measure airborne particle concentrations. The test protocol is applied, using pins made of the same rubber, to two types of surfaces composed of a mosaic of coarse aggregates and an asphalt mixture made of the same aggregates respectively. ELPI measurements show that the emission pattern depends on the wear stage and the material. At first, the particle concentration remains low and stable and is similar for the asphalt mixture and the aggregate mosaic. Then the particle concentration increases continuously for the two materials with a larger amplitude for the asphalt mixture. In the last stage, the emission is similar for the two materials. Analysis of particle concentration per particle size reveals distributions going from exponential- in the beginning to bell-shape in the following wear stages. Particle morphology and friction measurement are presented and correlated to emission results. Discussions are made in terms of particle generation mechanisms, which highlight the effect of aspects like the binder removal or the aggregate hardness on the characteristics of generated TRWP.