講演情報

[Recycle-17]Next Generation Concrete Surface (NGCS): a status quo

*Luc Goubert1, Barbara Vanhooreweder2 (1. Belgian Road Research Centre (Belgium), 2. Flemish Agency for Roads and Traffic)

キーワード:

NGCS、Concrete、grinding、grooving、noise reduction、rolling resistance reduction、CO2、climate change

Next Generation Concrete Surface (NGCS) is a surface treatment of hardened concrete pavement, intended to reduce the tyre/road noise and the rolling resistance. It consists of a combination of diamond grinding and longitudinal grooving, leading to a specific pattern of shallow and deeper grooves, parallel to the axis of the road. The technique was invented in the US, first introduced in Europe in Germany and later in Belgium. Two test sections with different patterns were realized by the Flemish Road Administration on the national road N44 in Maldegem (Belgium) in 2015. After a follow up of several years, the pattern of the best performing of the two (a deep groove alternated by four shallow grindings) was adopted as “standard NGCS pattern” and described in the Flemish standard specifications for road building. Noise reduction of a concrete pavement with NGCS is unequalled for concrete pavements: initial noise reduction is not less than 4,5 dB with respect to the reference asphalt pavements, which boils down to about 2 dB after 1 year and then it appears to stabilize.This contribution summarizes the experiences in Belgium with this type of noise reducing measures during the last years. It has been applied on a ring road as a noise reducing measure and a highway and some specific problems have occurred. There were technical problems with the applications, which in some cases led to a specific annoying tonal noise in the interiors of cars. The treatment has also been tried on some local roads with old concrete slab pavements and there were as well. Although some noise reduction was achieved, this operation was subjectively considered unsuccessful due to the remaining noise caused by the joints between the slabs.