講演情報

[Cycle_Path___Side_Walk-04]The skid resistance of cycle infrastructure: an empirical study

*Luc Goubert1, Tim Massart1, Carl Van Geem1, Anneleen Bergiers1, Ali Yeganeh1 (1. Belgian Road Research Centre (Belgium))

キーワード:

cycle lanes、skid resistance、friction、curves、bends

A modal shift from driving to cycling offers many advantages, such as a reduction of the emission of CO2, hazardous substances (NOx) and noise. To “get people on the bicycle”, it is crucial to provide them with a safe and comfortable cycling infrastructure. These two parameters were the focus of the biannual, prenormative Belgian project “SuChar-BiLan (Surface Characteristics of Bicycle Lanes)”. An important safety aspect is the skid resistance of the cycle path surface to avoid that cyclist fall, especially when taking turns or when braking. A difficult issue is how to measure the skid resistance in a way representative of the falling risk of cyclists taking a turn or braking. In this project a laboratory test was developed for measuring the “sideway” slipperiness of a surface, inspired on the existing “slope test” for assessing the slipperiness of a surface for pedestrians. The sideway slipperiness deals with the risk that the wheel of a cyclist slides laterally when taking a bend. Apart from the skid resistance of the surface also the radius of the curve and the velocity of the cyclist play a role. Also the type of the bicycle and the type of tyre are significant. This can be concluded from the about 200 measurements carried out during the project, on different surfaces, with different bicycles, tyres and carried out with different test persons (varying body weight). It is demonstrated that the SRT pendulum correlates well with the “static” situation (when the bicycle tyre is not slipping laterally) as well as with the “dynamic” situation (when it is sliding laterally), proving that the SRT is indeed a relevant method to assess the slipperiness of cycle paths. Minimum SRT-values as a function of the bicycle speed and the radius of the curve could be deduced, which are highly relevant information for standard specifications for cycle infrastructure.