講演情報
[Structure-06]The Relationship Between Asphalt Pavement Damage and Vertical Compressive Strain in the Granular Base Layer
*Naoki Yamamoto1, Yasushi Takeuchi2, Yuya Wakabayashi1, Masaaki Kuwabara1 (1. National Institute for Land and Infrastructure Management (Japan), 2. Tokyo University of Agriculture (Japan))
キーワード:
asphalt pavement damage、granular base layer、vertical compressive strain
The total length of paved roads in Japan exceeds 1,000,000 km, and road administrators must manage this large pavement stock efficiently under limited budgets. Against this background, the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) published the "Pavement Inspection Manual" in 2016, which provides pavement inspection and management policy for extending pavement service life and reducing life-cycle costs.
For asphalt pavements, one of the concepts of this manual is to prevent deterioration of the granular base (GB) layer by replacing the hot mix asphalt (HMA) layer at appropriate times. This is because the HMA layer has the role of dispersing wheel loads and transmitting them to the GB layer.
In our research, we considered that the effect of the load distributed by the HMA layer could be evaluated by the vertical compressive strain at the top of the GB layer (VCSGB). VCSGB is expected to increase when the HMA layer becomes damaged and loses ability to distribute wheel loads to the GB layer, or when the bearing capacity of the GB layer and the layers below it decreases. In Japan, a vehicle called “Moving Wheel Deflectometer” (MWD), which can measure deflection while moving, is being put into practical use. It is expected that MWD will enable efficient evaluation of VCSGB at the network level.
In this study, we conducted excavation surveys at three sections on the same route and examined the relationships between the damage level of the HMA layer and VCSGB, as well as between the bearing capacity of the GB layer and the layers below it and VCSGB.
As a result, it was found that sections with higher damage levels in the HMA layer and sections with lower bearing capacity in the GB layer and the layers below it tended to have larger VCSGB.
For asphalt pavements, one of the concepts of this manual is to prevent deterioration of the granular base (GB) layer by replacing the hot mix asphalt (HMA) layer at appropriate times. This is because the HMA layer has the role of dispersing wheel loads and transmitting them to the GB layer.
In our research, we considered that the effect of the load distributed by the HMA layer could be evaluated by the vertical compressive strain at the top of the GB layer (VCSGB). VCSGB is expected to increase when the HMA layer becomes damaged and loses ability to distribute wheel loads to the GB layer, or when the bearing capacity of the GB layer and the layers below it decreases. In Japan, a vehicle called “Moving Wheel Deflectometer” (MWD), which can measure deflection while moving, is being put into practical use. It is expected that MWD will enable efficient evaluation of VCSGB at the network level.
In this study, we conducted excavation surveys at three sections on the same route and examined the relationships between the damage level of the HMA layer and VCSGB, as well as between the bearing capacity of the GB layer and the layers below it and VCSGB.
As a result, it was found that sections with higher damage levels in the HMA layer and sections with lower bearing capacity in the GB layer and the layers below it tended to have larger VCSGB.
