講演情報
[Recycle-18]Fundamental Study on the Application of Recycling Methods for Pavement Milling Material to Frost Heave Mitigation Layers
*Junnosuke Tsukahara1, Seiji Aoyama1, Fuminori Sakata1, Hiroyuki Sakagami2, Daisuke Matsumoto2 (1. East Nippon Expressway Company Limited (Japan), 2. Nexco-Engineering Hokkaido Company Limited (Japan))
キーワード:
Recycling Methods、Pavement milling materials、Frost Heave Mitigation Layers
This study examines the applicability of pavement milling materials as materials for frost heave mitigation layers used in expressways in extremely cold regions in Hokkaido, Japan. In the planning and construction of expressways in cold climates, non frost susceptible materials are required for embankment layers to prevent pavement surface deterioration caused by frost heave, and such layers are typically constructed using new aggregates. However, in recent years, concerns have arisen regarding aggregate supply shortages due to both the increased occurrence of materials that fail to meet frost susceptibility criteria and the growing material demand associated with construction works.
At the same time, large quantities of pavement milling material are generated from maintenance activities, and its effective reuse is important from the perspectives of resource conservation and promoting recycling. Laboratory test results have shown that while milling material itself is non frost susceptible, its CBR value does not meet the required standards, making it difficult to use on its own. However, by adjusting the gradation through mixing with crushed stone, improvements were observed in compaction characteristics and CBR values, and it was confirmed that the frost susceptibility of crushed stone can be reduced even when the crushed stone alone is classified as frost susceptible.
This paper compares three recycling approaches for applying pavement milling material to frost heave mitigation layers: (1) using unmixed milling material, and (2) mixing milling material with crushed stone at ratios of 50%:50% and 25%:75%. The results indicate the potential applicability of these mixtures as frost heave mitigation layer materials, and the paper further discusses issues that need to be addressed for practical implementation.
At the same time, large quantities of pavement milling material are generated from maintenance activities, and its effective reuse is important from the perspectives of resource conservation and promoting recycling. Laboratory test results have shown that while milling material itself is non frost susceptible, its CBR value does not meet the required standards, making it difficult to use on its own. However, by adjusting the gradation through mixing with crushed stone, improvements were observed in compaction characteristics and CBR values, and it was confirmed that the frost susceptibility of crushed stone can be reduced even when the crushed stone alone is classified as frost susceptible.
This paper compares three recycling approaches for applying pavement milling material to frost heave mitigation layers: (1) using unmixed milling material, and (2) mixing milling material with crushed stone at ratios of 50%:50% and 25%:75%. The results indicate the potential applicability of these mixtures as frost heave mitigation layer materials, and the paper further discusses issues that need to be addressed for practical implementation.
