講演情報
[Structure-08]Development of Poured Waterproof Asphalt with Low-Molecular Weight Modifier Additives
*jang daeseong1, Han Kyungho1, Cho Jeonghwan1, Son Changmin1, lee jaejun1 (1. Jeonbuk National University (Korea))
キーワード:
Small Molecule、Dynamic Shear Rheometer、Bridge Pavement
As the national transportation network developed through industrial development increase, road structure facilities also increased rapidly. As the number of old road bridges increases rapidly, the risk of safety accidents is also increasing. According to a 2019 survey conducted by the Korea Land Safety Management Institute, the number of aged bridges over 30 years in 2019 was 5,908, which is increasing rapidly every year. Based on the number of aged bridges, the number of aged facilities in 2030 will be 16,310, which is more than three times higher than that of 2019. Accordingly, safety accidents caused by aged bridges are increasing in Korea. In order to prevent such safety accidents, road maintenance costs are steadily increasing, and accordingly, the management of old bridge facilities is becoming important. In the case of bridge pavement, unlike general asphalt pavement, asphalt is paved on the concrete floor plate and the steel floor plate, and when deterioration occurs, the progression speed increases very rapidly. Starting to occur places with weakened waterproof performance, detachment, potholes, cracks, etc. and it becomes an environment in which deterioration phenomena are more likely to occur even after maintenance. Therefore, this study aims to evaluate the applicability to the lower layer for bridge pavement using the newly developed low molecular weight reforming additive. First, the common performance of the asphalt binder was evaluated according to the SBS content and mixing method, and the optimal mixing ratio was determined in consideration of rheological characteristics through a dynamic shear rheometer. After that, the SMA10mm mixing design was conducted using the determined optimal mixing ratio, and physical properties were evaluated and compared with the same grade asphalt binder from Company D.
