講演情報

[t3FRZuAM-05]Pilot study for the verification of pavement surveying equipment in Mexico

*Ricardo Solorio1, Agustin Sanchez1, Horacio Delgado1, Noe Hernandez2 (1. Mexican Institute of Transport (Mexico), 2. Red de Carreteras de Occidente (Mexico))

キーワード:

Equipment verification、Data QA/QC、Reproducibility

The consistency of pavement surface condition data collected by means of automated surveying equipment is an essential requirement for ensuring the reliability of asset management processes. With this in mind, the Mexican Institute of Transport and a private highway operator in the country have conducted a pilot study aimed at designing procedures for verifying pavement inspection equipment in Mexico. Commonly, this verification has been carried out by comparisons with reference equipment based on linear regression. The study presented in the article consisted of convening ten nationally recognized pavement inspection service providers to take measurements of IRI, rutting, and macrotexture depth on two recently rehabilitated asphalt pavement sections, which are managed by the private operator. A manual profiler of the walking profiler type and a static transverse profiler were used as reference equipment. The procedure specified in AASHTO R 56 was applied to evaluate the IRI measurements, whereas simple indicators of accuracy and repeatability were used for rutting and macrotexture. In general, results obtained with the application of AASHTO R 56 were satisfactory. Regarding rut depth measurements, variations among the different participants were observed that could be linked to the different device types used and to the number and position of the sensors installed. Macrotexture measurements also showed deviations, although these might be mainly connected to systematic errors. In subsequent stages of this study, the effects of using different technologies on rut depth and macrotexture measurements will be investigated in greater detail. Overall, the analysis of the whole data set collected during the study suggests an operator’s clear influence on the quality of the results.