講演情報
[Structure-04]Towards Full Deflection Bowl Characterization Beyond D0 Using a Moving Wheel Deflectometer: Integration of Viscoelastic FE Analysis and Practical Sensor Methods
*Jun Umeda1, Marei Inagi1, Takuto Suzuki1, Hironobu Maehara1 (1. Toa Road Corporation (Japan))
キーワード:
Moving Wheel Deflectometer、deflection bowl、viscoelastic finite element analysis、geophone、accelerometer
In Japan, the Moving Wheel Deflectometer (MWD) is under development as an efficient tool for pavement maintenance, enabling continuous measurement of pavement surface deflection during vehicle passage. However, current MWD evaluation is effectively limited to the center deflection directly beneath the rear wheel (D0), because the full shape of the deflection bowl under moving loads has not been sufficiently clarified. This study aims to extend MWD capability by enabling estimation of deflections at positions away from the rear wheel, thereby supporting structural evaluation based on spatial deflection distribution. To achieve this, a viscoelastic finite element (FE) analysis was conducted to clarify transient surface deflection waveforms and moving-load deflection bowl shapes generated during MWD operation. The results demonstrated that deflection shape varies with vehicle speed and pavement structural conditions, and a new approximation function describing the deflection bowl was proposed. Based on this function, it becomes possible to infer pavement structural parameters such as the subgrade elastic modulus. To verify applicability beyond theoretical modeling, a practical method for field deflection measurement was developed using embeddable geophones and accelerometers as alternatives to traditional embedded displacement transducers. Geophone signals were processed using inverse filtering combined with high-pass filtering, and an optimal cutoff frequency selection procedure depending on vehicle speed was derived. For accelerometers, displacement reconstruction via frequency-domain integration significantly improved waveform reproducibility and measurement accuracy. Finally, the deflection waveforms predicted by FE analysis and those measured by embedded displacement transducers showed close agreement, confirming the consistency between numerical analysis and in-situ response.
