Session Details

[PS]Poster & Free Discussion 1

Tue. Oct 20, 2026 4:15 PM - 5:45 PM JST
Tue. Oct 20, 2026 7:15 AM - 8:45 AM UTC
Poster (Hall A)

[PS-01]Evaluation of interfacial thermal resistance of Fe/Fe1-xO using spot periodic heating radiation thermometry

*Keisho Maeda1, Rei Koseki1, Rie Endo1, Takashi Yagi2 (1. Shibaura Institute of Technology (Japan), 2. National Institute of Advanced Industrial Science and Technology (Japan))
Comment()

[PS-02]Revealing the grain orientation-dependent Wüstite nucleation in Fe1Mn alloy

*Radhey Murlidhar Bachhav1, Vitaliy Bliznuk2, Arjan Mol1, Amarante Böttger1 (1. Delft University of Technology (Netherlands), 2. Ghent University (Belgium))
Comment()

[PS-03]Liquid-Phase Reactions during Early-Stage Scale Formation in the Presence of Na2O-SiO2 Liquid

*Takuro Ushikubo1, Kazuki Nishinaka2, Hiroshi Fukaya1, Takahiro Miki1 (1. Graduate school of Engineering, Tohoku University (Japan), 2. JFE Steel Corp. (Japan))
Comment()

[PS-04]Effect of Ti Addition on the High-Temperature Oxidation Behavior of Nb-stabilized 19% Cr Ferritic Stainless Steel

*Atsutaka Hayashi1,2, Mitsutoshi Ueda2,3, Shigenari Hayashi2, Suzue Yoneda2 (1. Nippon steel corporation (Japan), 2. Hokkaido University (Japan), 3. Institute of Science Tokyo (Japan))
Comment()

[PS-05]Thermal performance of a composite phase change material with alumina-microencapsulated Al-Si eutectic for thermal energy storage

*Sarah Levy1, Marie Duquesne1, Alexandre Godin1, Elena Palomo Del Barro2, Jean-Luc Dauvergne2, Fernando Pedraza1, Benjamin Grégoire1 (1. Laboratoire des Sciences de l’Ingénieur pour l’Environnement, (UMR-CNRS 7356), La Rochelle Université, Avenue Michel Crépeau 17042 La Rochelle (France), 2. CIC energiGUNE, Parque Technológico de Álava, Albert Einstein 48, Vitoria-Gasteiz Álava (Spain))
Comment()

[PS-06]Effects of Nano-Oxide Dispersions on the High Temperature Capabilities of Alumina Forming Multi-Principal Element Alloys

*Braeden A Duwa1, Colton A Gilleland2, Gregory B Thompson2, Mark L Weaver1 (1. The University of Alabama (USA), 2. Alabama Materials Institute (USA))
Comment()

[PS-07]Effect of Surface Preparation on the Oxidation Behavior of three Nickel-Based Alloys

*Thomas PEREZ1, Lucas POUSSIER1, Tom SANVIEMVONGSAK1 (1. Safran Tech (France))
Comment()

[PS-08]High-Temperature Stability and Magnetic Behavior of NiMnGa Ferromagnetic Shape Memory Alloys under Oxidation

*Aya Harashima1, Naoki Nohira1, Masaki Tahara1, Hideki Hosoda1 (1. Institute of Science Tokyo (Japan))
Comment()

[PS-09]High Temperature Oxidation of several HEAs Derived From the Cantor’s Alloy

*Patrice Berthod1 (1. University of Lorraine (France))
Comment()

[PS-10]Microstructural Evolution of Oxide Scale on an Fe-9mass%Cr Alloy under Hydrogen Permeation at 923 K

*Rei Okita1, Mitsutoshi Ueda2,3, Suzue Yoneda2, Shigenari Hayashi2 (1. Graduate School of Engineering, Hokkaido University (Japan), 2. Faculty of Engineering, Hokkaido University (Japan), 3. School of Materials and Chemical Technology, Institute of Science Tokyo (Japan))
Comment()

[PS-11]Beyond Initial Oxidation: Long-Term Internal Corrosion Behavior of AISI 347H at 700 °C in Humid Environments

*Hooman Karimi Abadeh1, Hampus Lindmark1, Tobias Mattison2, Torbjörn Jonsson1, Jesper Liske1 (1. Department of Chemistry and Chemical Engineering, Chalmers University of Technology (Sweden), 2. Department of Space, Earth and Environment, Chalmers University of Technology (Sweden))
Comment()

[PS-12]Moisture effects on high temperature oxidation of novel coherent B2/L21-strengthened Fe-based BCC superalloy processed by laser directed energy deposition

*Karthikeyan Hariharan1,2, Beyza Öztürk3, Vignesh Karunakaran4, Koushik Kosanam2,1, Christopher Zenk2, Yunzhi Wang4, Mathias C. Galetz3, Sannakaisa Virtanen2 (1. Indian Institute of Technology Bombay (India), 2. Friedrich-Alexander Universität Erlangen-Nürnberg (Germany), 3. DECHEMA Forschunginstitut (Germany), 4. The Ohio State University (USA))
Comment()

[PS-13]Effect of Silicon Content on High-Temperature Oxidation and Electrical Performance of Ferritic Stainless-Steel Interconnects

*Selli Widhi Astuti1, Shrikanth Syamprassad1, Jan Froitzheim1 (1. Chalmers University of Technology (Sweden))
Comment()

[PS-14]Water Vapor Oxidation Behavior of Thermal Barrier Coatings with APS- and HVOF-Sprayed Bond Coats

*Toshiki Sato1, Yutaro Ota1, Yasuo Matsunaga1, Yuta Tanaka1 (1. IHI Corporation (Japan))
Comment()

[PS-15]Microstructural Evolution of Oxide Scales on an Fe-9mass%Cr Alloyin Dry CO2 during Heating up to 923 K

*SHUNSUKE HAMADA1, Mitsutoshi Ueda2,3, Suzue Yoneda2, Shigenari Hayashi2 (1. Graduate School of Engineering, Hokkaido University (Japan), 2. Faculty of Engineering, Hokkaido University (Japan), 3. School of Materials and Chemical Technology, Institute of Science Tokyo (Japan))
Comment()

[PS-16]Sulfidation of steels in H2S containing atmospheres

*Alexander Georg Donchev1, Mario Rudolphi1, Mathias Galetz1 (1. DFI (Germany))
Comment()

[PS-17]Nitridation resistance of commercially available alloys under ammonia cracking conditions

*Katharina Beck1, Ceyhun Oskay1, Fausto Tidona2, Lena Engelmeier2, Mathias C. Galetz1 (1. DFI (Germany), 2. ZBT (Germany))
Comment()

[PS-18]Effect of Flue Gas Temperature on High-Temperature Corrosion Behavior of Superheater Tubes under Waste-to-Energy Boiler Conditions

*Taisei Kurosawa1, Hiromitsu Cho1, So Murasue1, Naoki Kamiyama1 (1. EBARA Environmental Plant Co., Ltd. (Japan))
Comment()

[PS-19]Studies of Type II Hot Corrosion Mechanisms Using Powder Model Systems

*Lourdes Camarma1, Dmitry Naumenko1, Michael Mueller1, Martin Sperr2, Martin Frommherz2 (1. Forschungszentrum Jülich GmbH (Germany), 2. MTU Aero Engines AG (Germany))
Comment()

[PS-20]Effect of SO2 and Sulphate on Corrosion of Ni-based Alloys 625 and 233 at 650 °C

*Xuteng Xi1, Jianqiang Zhang1, Sophie Primig1, David J. Young1 (1. The University of New South Wales (Australia))
Comment()

[PS-21]High-Temperature Corrosion Behavior of Ni-30Cr-xW Alloys in Waste-to-Energy Boiler Condition

*Mitsuki Nosaka1, Suzue Yoneda1, Masaya Kanazawa2, Eiji Ishikawa3, So Murasue4, Mitsutoshi Ueda1, Shigenari Hayashi1 (1. Hokkaido university (Japan), 2. Dai-ichi High Frequency Co., Ltd (Japan), 3. EBARA Environmental Plant Co., Ltd (Japan), 4. EBARA Corporation (Japan))
Comment()

[PS-22]Evaluation of Exploratory Fast-passivating (Ni, Co)-based Metallic Coatings from Modelling

*Preston Nguyen1, Halle White1, David Poerschke1 (1. University of Minnesota (USA))
Comment()

[PS-23]Effects of Surface Preparation and Creep-Fatigue Loading on the Corrosion Behavior of INCONEL 718 in Static Liquid Sodium at 550 °C

*Florian André Lebendig1, Florian Martini, Olaf Wedemeyer1, Gaetano Aiello1, Michael Dürrschnabel1, Björn Schäfer, Carsten Schroer1, Bronislava Gorr1 (1. Karlsruhe Institute of Technology (KIT) (Germany))
Comment()

[PS-24]Effect of Fe dilution on the high-temperature corrosion behavior of In625 alloy under deposition of synthetic ash containing alkali salts in air

*Naoki Saegusa1, Shigenari Hayashi2, Suzue Yoneda2, Mitsutoshi Ueda2, Hirotaka Sato3, Fumika Kanada3 (1. Graduate School of Engineering, Division of Materials Science and Engineering, Hokkaido University, (Japan), 2. Faculty of Engineering, Division of Materials and Engineering, Hokkaido University (Japan), 3. Nippon Steel Engineering Co., Ltd. (Japan))
Comment()

[PS-25]Electrochemical study of tellurium in the NaCl–MgCl2 molten salt at 600 °C

*Djénéba Diomandé1, Annabelle Vernouillet1, Romain Malacarne1, Nathalie Gruet1, Laure Martinelli1 (1. CEA Saclay (France))
Comment()

[PS-26]Ceramics for nuclear materials pyroprocessing: mechanisms of corrosion by molten salts and 3D printing advances

*Thomas DALGER1, Anouck ANGLADE1,2, Olivier LEMOINE1, Pierre-Jean PANTEIX2, Carine PETITJEAN2 (1. CEA (France), 2. Institut Jean Lamour - UMR 7198 (France))
Comment()

[PS-27]Type I hot corrosion of slurry aluminide coatings

*Maël Debove1, Fernando Pedraza1, Louis Hunault1, Benjamin Grégoire1 (1. LaSIE (France))
Comment()

[PS-28]Effect of Heating and Deformation on PVD Nitride Coatings

*Yasunori Harada1, Souma Inagaki2, Yusuke Ushiro3, Ippei Tanaka1 (1. University of Hyogo (Japan), 2. School of Engineering, University of Hyogo (Japan), 3. Umetoku Co., Ltd. (Japan))
Comment()

[PS-29]Microstructural Analysis and Oxidation/Hot Corrosion Behavior of Cr3C2-NiCr Coatings with HfO2 and Si Additions

*Safitry Ramandhany1, Shigenari Hayashi2, Eni Sugiarti3, Djoko Triyono1, Endro Junianto4, Suzue Yoneda2, Mitsutoshi Ueda2, Hubby Izzuddin3, Agus Sukarto Wismogroho3, Nurul Latifah3, Kurotun Aini3, Risma Yulita Sundawa3, Muhamad Sar'i3 (1. Department of Physics, Faculty of Mathematics and Natural Science, University of Indonesia, Jl. Margonda Raya, Depok, 16424 (Indonesia), 2. Division of Material Science and Engineering, Faculty of Engineering, Hokkaido University, N13 W8, Kita-ku, Sapporo, 060-8628 (Japan), 3. Research Center for Energy Materials, National Research and Innovation Agency (BRIN), Kawasan Puspiptek, Serpong, 15314 (Indonesia), 4. Research Center for Smart Mechatronics, National Research and Innovation Agency (BRIN), Jl. Sangkuriang, Bandung, 40135 (Indonesia))
Comment()

[PS-30]Effect of Pure Metal Coatings on High-Temperature Corrosion Behavior of Fe-20Cr-20Ni in an Ammonia-Containing Atmosphere

*Tomoya Kudo1, Suzue Yoneda1, Mitsutoshi Ueda1, Shigenari Hayashi1 (1. Hokkaido Univ. (Japan))
Comment()

[PS-31]Sintering and Oxidation Behavior during the Composite Sintering Process with Green Pellets Using De-phosphorized Fine Iron Ore

*Daisuke Maruoka1, Fumiya Sudo2, Zhe Ma2, Taichi Murakami2, Shohei Fujiwara3, Eiki Kasai2,3 (1. National Institute of Technology, Hachinohe College (Japan), 2. Tohoku University (Japan), 3. JFE Steel Corporation (Japan))
Comment()

[PS-32]Evaluation of Dynamic Deformation Behavior of Oxide Scale Layer in Roll Bite during Hot Rolling

*Akio Segawa1, Yasumitsu Kondo1 (1. Kanazawa Institute of Technology (Japan))
Comment()

[PS-33]Effects of Cr Boride on High Temperature Erosion Corrosion Behavior of Fe-Ni-Cr-B Alloys

*Takuto Nakajima1, Suzue Yoneda2, Mitsutoshi Ueda2, Shigenari Hayashi2 (1. Graduate School of Engineering, Hokkaido University (Japan), 2. Faculty of Engineering, Hokkaido University (Japan))
Comment()

[PS-34]Predicting the Corrosion Resistance of Fe and Fe–Cr Alloys in Ammonia Environments Using Gaussian Process Regression

*Michihisa Fukumoto1, Keita Itano2, Hiroki Takahashi1, Laure Martinelli3, Clara Desgranges3 (1. Akita University (Japan), 2. JAMZTEC (Japan), 3. CEA (France))
Comment()

[PS-35]High-temperature Oxidation Behavior of Cr2AlC Ceramics

Okada Itsuki1, *Yuuma Onodera1, Naoya Yamaguchi2, Yen-Ling Kuo1, Makoto Nanko1 (1. Nagaoka university of Technology (Japan), 2. National Institute of Technology, Fukushima College (Japan))
Comment()

[PS-36]High-temperature Reaction of Secondary Aluminum Dross Ceramics with Molten Aluminum

*Kaito Suzuki1, Takahiro Suzumura2, Yen-Ling Kuo1, Makoto Nanko1 (1. Nagaoka University of Technology (Japan), 2. Suzumura Co., Ltd., (Japan))
Comment()

[PS-37]Nanocrystalline Refractory Alloy Design for Enhanced Oxidation Tolerance in Extreme Environments

*Colton Gilleland1, Braeden Duwa2, Mark Weaver2, Gregory Thompson1,2 (1. Alabama Materials Institute (USA), 2. University of Alabama (USA))
Comment()

[PS-38]Characterizing Strain-Rate-Dependent Plasticity of Alloys via High-Temperature Instrumented Indentation

*Ikumu Watanabe1, Ta-Te Chen1,2 (1. National Institute for Materials Science (Japan), 2. Nagoya University (Japan))
Comment()